Back close

STATCOM Based Controller for a Three Phase System Feeding Single Phase Loads

Publication Type : Conference Paper

Publisher : Proceedings of IEEE International Conference on Technological Advancements in Power and Energy

Source : Proceedings of IEEE International Conference on Technological Advancements in Power and Energy, TAP Energy 2015, Institute of Electrical and Electronics Engineers Inc., p.333-338 (2015)

Url : http://www.scopus.com/inward/record.url?eid=2-s2.0-84945143820&partnerID=40&md5=65b54cb5a42309251e11436f9d6c06a4

ISBN : 9781479982806

Keywords : Controllers, Electric current regulators, Electric load flow, Electric power factor, Electric power factor correction, Feeding, Harmonic analysis, harmonic mitigation, MATLAB, Network management, Reactive power, Reactive power compensation, Resource allocation, Single phase, Single-phase loads, Static synchronous compensators, Synchronous reference frame theories, Three phase system, Unbalanced condition, Unity power factor

Campus : Amritapuri

School : School of Engineering

Center : Amrita Innovation & Research

Department : Electrical and Electronics

Verified : Yes

Year : 2015

Abstract : Majority of loads connected in the power system are single phase loads. Large concentration of single phase non-linear loads will inject harmonics in to the system and create unbalance in the source current. Most of these loads consume more reactive power and thus increases feeder losses and reduces active power flow capability of the system. In this paper, a STATCOM based controller for a three phase system feeding single phase loads is presented. The objectives of the controller in the system is to compensate the inductive loads to obtain nearly unity power factor, balance the source currents by cancelling the effect of unbalanced loads and to filter out the load harmonic currents in order to form a sinusoidal supply current. Single phase synchronous reference frame theory based algorithm is used for generating the reference source currents. A simulation model of the system is developed in MATLAB SIMULINK and tested with linear and non-linear loads under balanced and unbalanced conditions. © 2015 IEEE.

Cite this Research Publication : P. Anu, Divya, R., and Dr. Manjula G. Nair, “STATCOM Based Controller for a Three Phase System Feeding Single Phase Loads”, in Proceedings of IEEE International Conference on Technological Advancements in Power and Energy, TAP Energy 2015, 2015, pp. 333-338.

Admissions Apply Now