Back close

Real-time communication system design using RTL-SDR and Raspberry Pi

Publication Type : Conference Paper

Thematic Areas : Center for Computational Engineering and Networking (CEN)

Publisher : Sri Eshwar College of Engineering' CampusCoimbatore

Source : ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe, Sri Eshwar College of Engineering' CampusCoimbatore (2014)

Url : https://www.scopus.com/inward/record.uri?eid=2-s2.0-84912126729&partnerID=40&md5=2995492eee6d0e3217d346bca7fc6b56

Campus : Coimbatore

School : School of Engineering

Center : Center for Computational Engineering and Networking

Department : Electronics and Communication

Verified : Yes

Year : 2014

Abstract : RTL-2832U USB receiver - Raspberry Pi setup receives and decodes the FM signals and sends to another computer across the Local Area Network. It can be realized by means of SDR-Sharp software in remote PC; hence it can be used for communication. Raspberry Pi is a low cost, credit-card sized computer. Whereas RTL-2832U USB receiver has a mode where it dumps raw IQ samples over USB to the computer. The GNU Radio experiments supports this relatively cheap USB receiver as a software defined radio. Using GNU Radio Companion, all real-time communication experiments can be reproduced. © 2013 IEEE.

Cite this Research Publication : R. Danymol, Ajitha, T., and Gandhiraj R., “Real-time communication system design using RTL-SDR and Raspberry Pi”, in ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe, Sri Eshwar College of Engineering' CampusCoimbatore, 2014.

Admissions Apply Now