Publication Type : Conference Paper
Publisher : 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI)
Source : 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI), IEEE, Udupi, India (2017)
Keywords : antenna feeds, band-pass filters, coupling coefficients, Diplexer, FR4 epoxy, high isolation diplexer, Isolation, loop antennas, mathematical model, microstrip resonator, Microwave antennas, Multiplexing equipment, noise figure 1.5 dB, noise figure 25.0 dB, P-OLR diplexer, Pentagonal Open Loop Resonator, pentagonal open loop resonators, Ports (Computers), Resonant frequency, resonator filters, Resonators, RF circuits, Superconducting filters, T-shaped feed, UHF antennas, Wi-Fi bands, wireless LAN
Campus : Amritapuri
School : School of Engineering
Center : Electronics Communication and Instrumentation Forum (ECIF)
Department : Electronics and Communication
Verified : Yes
Year : 2017
Abstract : A high isolation Diplexer with Pentagonal Open Loop Resonators (P-OLR) is presented in this paper. The Diplexer contains two resonators providing pass bands in the desired frequency, thus attaining significant size reduction. The P-OLR offers several design freedoms, such as the pass band frequency can be adjusted by properly tuning its geometrical parameters and its bandwidth can be controlled through changing the coupling coefficients between the T-shaped feed and the resonator. To verify the designed method a P-OLR diplexer operating at the Wi-Fi bands is successfully designed and fabricated on FR4 epoxy. The maximum insertion loss of two pass bands is 1.5 dB and the isolation between channels at the pass bands higher than 25 dB.
Cite this Research Publication : M. Ranjith, S. Aiswarya, and Dr. Sreedevi K Menon, “High isolation diplexer for rf circuits using loop resonators”, in 2017 International Conference on Advances in Computing, Communications and Informatics (ICACCI), Udupi, India, 2017