Publication Type : Conference Proceedings
Publisher : Materials Today: Proceedings
Source : International Conference on Materials Engineering and Characterization, Materials Today: Proceedings, Volume 22, p.726 - 736 (2020)
Url : https://www.sciencedirect.com/science/article/pii/S2214785319335412
Keywords : ANOVA, End milling, Machining parameters, Surface roughness, TiAlN coated tool
Campus : Chennai
School : School of Engineering
Center : Research & Projects
Department : Mechanical Engineering
Year : 2020
Abstract : In this study, the effect of machining parameters on surface roughness is investigated during CNC end milling process of Al6061 – T6 Alloy by Taguchi’s method. The work material was machined with uncoated carbide tool and TiAlN coated carbide tool and comparative analysis have made between coated and uncoated tool for identifying the better surface finish. ANOVA analyses were carried out to identify the significant factors affecting surface roughness, and the optimal cutting combination was determined by seeking the best surface roughness and signal-to-noise ratio. Finally, confirmation tests verified that the Taguchi design was successful in optimizing milling parameters for surface roughness.
Cite this Research Publication : Haja Syeddu Masooth P., Jayakumar V., and Bharathiraja G., “Experimental investigation on surface roughness in CNC end milling process by uncoated and TiAlN coated carbide end mill under dry conditions”, International Conference on Materials Engineering and Characterization, Materials Today: Proceedings, vol. 22. pp. 726 - 736, 2020.