Publication

Abstract : A novel, scalable, and low-cost strategy for fabricating sub-wavelength scale hierarchical nanostructures by direct patterning of TiO2 nanoparticles on glass substrates is reported. Two nanostructural designs of light-trapping back-surface reflectors (BSR) have been fabricated for increasing the photon-harvesting properties of thin-film solar cells: a quasi-periodic nano-crater design and a random nano-bump design. The efficient light-scattering properties of the nano-crater design over a broad wavelength range are demonstrated by the measured haze factor being larger than 40% at wavelengths (~700 nm) near the band edge of amorphous silicon (a-Si:H). The a-Si:H-based n-i-p solar cell fabricated with an only ~200 nm thick absorber layer on the nano-crater BSR shows a short-circuit current density (Jsc) of ~16.1 mA cm−2 representing a 28% enhancement compared to the cell deposited on a non-textured flat substrate. Measurements of the external quantum efficiency of the cell fabricated on the quasi-periodic nano-crater surface at long wavelengths, λ  >  700 nm, demonstrate an increase of a factor of 5 relative to that of a flat reference solar cell. The theoretical modeling results of optical absorption corroborate well with the experimental findings and are used to identify the volumes of strong optical absorption in the a-Si:H active layer of the textured BSR devices.