Programs
- M. Tech. in Automotive Engineering -
- Fellowship In Interventional Pulmonology and Pulmonary Critical care - Fellowship
Publication Type : Journal Article
Publisher : Wiley Online Library
Source : Journal of Polymer Engineering and Science (2023), DOI: 10.1002/pen.26477
Url : https://4spepublications.onlinelibrary.wiley.com/doi/abs/10.1002/pen.26477
Campus : Coimbatore
School : School of Engineering
Year : 2023
Abstract : Armed vehicles, improvised explosive device blast-proof vehicles, require their windshields and windows to be transparent and yet be resistant to high-velocity impact of splinters. Hence, composite which is of ballistic grade and yet transparent is in real need for all these applications. This study is dedicated to finding a practical solution for using transparent polycarbonate (PC) laminate made using solvent vapor bonding for ballistic applications. The solvent that was proved to be best for solvent vapor bonding of polycarbonate sheets was dichloromethane, as the bond strength was observed to be high from the results of lap shear tensile test. The transparency retention is reasonably high when solvent vapor bonding was used and the toughness has increased near to 50% in comparison with nonlaminated PC. In this study, a polycarbonate laminate with dimensions 150 × 150 × 40 mm made using solvent vapor bonding and is tested with two 9-mm bullets fired with velocity of 430 m/s from a distance of 5 m. The laminae successfully stopped both the bullets without any back face signature and there was no brittle failure as such, rather delamination happened at interface of laminae since it has essentially absorbed the impact energy of bullet.
Cite this Research Publication : Anil Kumar, Kollipaka Pothuraju, K. Rajya Lakshmi and Shantanu Bhowmik, "Development of light weight transparent bullet proof polymeric laminates", Journal of Polymer Engineering and Science (2023), DOI: 10.1002/pen.26477