Back close

Book Chapter

Compression, Transfer and Injection Moulding

Publisher : Polymer Processing Technology, Editor: B.R.Gupta

Conference Paper

Radiation Pattern of Yagi-Uda antenna using GNU Radio Platform

Publisher : International Conference on Trends in Technology for Convergence (TITCON ’14)

Dynamic Mechanical Analysis of Microfibrillar Insitu Composites based on PP and PET

Publisher : POLYCHAR 16 – World Forum for Advanced Materials

Implementation of CDMA in GNU radio

Publisher : International Conference on Information and Communication Technologies (ICICT 2014)

Microfibrillar Composites from Polymer Blends

Publisher : First International Conference on Composites and Nanocomposites (ICNC 2011) organized by Center for Nanoscience and Nanotechnology

Azo functionalized graphene oxide: synthesis and characterization

Publisher : 2nd International Conference on Advanced Nanomaterials and Nanotechnology (ICANN- 2011)

Automated PCG signal delineation method for heart sound analysis

Publisher : Twentieth National Conference on Communications (NCC), 2014

Simultaneous Access of RF Front End from more clients using GNU Radio for Low Cost Platform

Publisher : International Confernece on Recent Trends in Engineering and Technology (ICRTET-2014)

Role of Rheology In Polymer Extrusion

Publisher : National Conference on Application of Melt Rheology in Polymer

Recycling of Scrap Tyres and Tyre Derived Fuel

Publisher : National Seminar on “Emerging Trends in Polymer Engineering

Solar based lemon grass essential oil distillation for sustainability and livelihood in tribal community

Publisher : GHTC 2016 – IEEE Global Humanitarian Technology Conference: Technology for the Benefit of Humanity, Conference Proceedings

Computational issues in gross error detection and data reconciliation

Publisher : International Conference on Foundations of Computer-Aided Process Operations FOCAPO

Process Optimisation of Injection Moulded Plastic Products Using Moldflow Analysis

Publisher : EPAT 2003, National Symposium on Engineering Polymers: Applications and Technology

Preparation and Properties of Microfibrillar based Polymer-Polymer Composites

Publisher : International conference on Science and Technology for Sustainable Development

Crystal engineering in cobaloximes: Lamellar, pillared, tubular and helical assemblies assisted by C-H…O, C-H…Cl and C-H…pi interactions

Publisher : International symposium on Structural bioinformatics: Structure and functions of macromolecules (BIOFEST-08)

Analysis of Rejection Rate in Gas Assisted Injection Molded Products using FMEA

Publisher : Third National conference on Polymers MACRO 05

Efficiency Improvement in Solar Co generation using Micro channel Heat Exchangers

Publisher : 2nd Journal of Thermal Analysis and Calorimetry Conference

Degradation kinetic study of Poly lactic acid (PLA) based biodegredable green composites

Publisher : “Materials Today: Proceedings” (presented at IConAMMA 2018

Polymer nanocomposites for inflatable Space Structures:Property Optimization using Response Surface Methodology

Publisher : Sixth International Conference on “Precision ,Meso,Micro and Nano Engineering

Modelling techniques for optimizing polymer formulations and process parameters

Publisher : International Conference on Natural Polymers (ICNP 2007)

Mechanical and Thermal Properties of Microfibrillar Polymer Polymer Composite

Publisher : International Seminar on Frontiers in Polymer Science and Technology, POLY-2007

Conference Proceedings

Mechanical and Sorption Behaviour of Organo-modified Montmorillonite nanocomposites based on EPDM – NBR Blends

Publisher : Proceedings of International Conference on Advanced Materials SCICON’16 . Department of Sciences

Cure and Degradation Kinetics of Sulfur Cured Nanocomposites of EPDM-NBR Rubber Blends

Publisher : Proceedings of the second edition of Icon AMMA a three day International Conference on “Advances in Materials and Manufacturing Applications (IConAMMA 2017)

Thermal and Mechanical Behavior of Functionalized MWCNT Reinforced Epoxy Carbon Fabric Composites

Publisher : Proceedings of the 3rd International Conference on “Advances in Materials and Manufacturing Applications (IConAMMA 2018)

Performance Enhancement of UHMWPE with Surface Functionalized MWCNT/Graphite Nanocomposites

Publisher : Proceedings of the Second International Conferences on Structural Integrity (ICONS-2018), Invited paper 14, Session VD Stuctural Integrity of Composite Materials. Indira Gandhi Centre for Atomic Research, Kalpakkam & Society for Failure Analysis, Chennai Chapter together with Indian Institute of Technology Madras

Synthesis and Characteristics of MMT Reinforced Chitosan Nanocomposite

Publisher : Proceedings of the 4th International Conference on “Advances in Materials and Manufacturing Applications (IConAMMA 2019)”

Synthesis and Characterization of 5,10,15,20 meso tetra (4-aminophenyl) porphyrin-functionalized graphene oxide

Publisher : 2nd International Conference on Advanced Nanomaterials and Nanotechnology(ICANN-2011)

Approaches in Modeling Properties of Polymer Nanocomposites

Publisher : Proceedings of Second International Conference on Natural Polymers, Bio-polymers, Bio-Materials, their composites, Blends, IPNs and Gels Polyelectrolytes and Gels: Macro to Nano Scales (ICNP-2010)

Role of pyrrole in biological systems

Publisher : Recent trends in Medicinal Chemistry

Design of Experiments for Optimizing NBR Nanocomposite Formulations

Publisher : International conference on Advances in Polymer Technology

Morphology and mechanical properties of in situ microfibrillar composites from LDPE and PET

Publisher : ISAMPE National Conference 2009 (INCCOM-8) Emerging Trends in Composite Materials and Technology

Role of DoE [Design of Experiments] in Development of Nanoclay – Nitrile Rubber Composites

Publisher : Proceedings of International Conference on Manufacturing Science and Technology (ICMST 2010)

Mechanical And Visco-Elastic Properties Of Silicone Rubber – Nanoclay Composites And Its Application In Vibration Damper

Publisher : Proceedings of International Conference on Manufacturing Science and Technology (ICMST 2010)

Influence of cold drawing on the properties of microfibrillar structured insitu composites from PP and PET.

Publisher : International Conference on Advances in Polymer Technology (APT-10)

Influence of blend ratio on the mechanical and sorption behaviour of polymer – polymer microfibrillar composites from LDPE and PET

Publisher : International Conference on Recent Trends in Materials Science and Technology (ICMST-2010)

Influence of Nanofiller Type on Mechanical and Solvent sorption behavior of Nitrile Rubber based Nanocomposites

Publisher : Proceedings of Fourth International Conference on Nanostructured Materials and Nanocomposites organized by International and Inter University Centre for Nanoscience and Nanotechnology(IIUCNN),

Influence of high permittivity nanoparticle on water tree growth in XLPE nanocomposite

Publisher : Proceedings of IEEE International Conference on Circuit, Power and Computing Technologies, ICCPCT 2017

Simulation of electric field distribution in nanodielectrics based on XLPE

Publisher : Proceedings of International Conference on Recent Advances in Nano Science and Technology 2015 (RAINSAT-2015)

Physico-chemical Studies of Amoxycillin Loaded Sulfonated Polymer

Publisher : International Conference on Material Sciences SCICON’16, (Scopus)

Elastomer Based Composites

Publisher : Proceedings of International Conference on Latest in Polymers – 2010

Elastomer-based nanocomposites : Trends and Challenges

Publisher : Proceedings of National conference on Frontiers in Polymer Nanomaterials and Composites

Nanocomposites : Property Dependence on Filler Shape and Content

Publisher : 3rd Int Conf on Natural Polymers, Bio-polymers, Bio-Materials, their composites, Blends, IPNs Gels Polyelectrolytes Gels: Macro to Nano Scales, by Centre for Nanoscience Nanotechnology at M.G. Univ Beijing Univ of Chemical Technology, China

Studies on Polyaniline (PANI)/Polyvinylidene fluoride (PVDF) based blends

Publisher : National Conference on Recent Trends in Materials Science and Technology – 2013 (NCMST-13) organized by Department of Chemistry, Indian Institute of Space Science and Technology.

Simulation studies on Electric field propogation in cross-linked Polyethylene Nanosilica Composites

Publisher : Proceedings of International Conference on Macromolecules: Synthesis, Morphology, Processing, Structure, properties and Applications ICM 2016

Applications Of Markers

Publisher : Recent trends in Medicinal Chemistry

Study of Heat Transfer during gas-solid flows

Publisher : Indian Society of Mechanical Engineering Conference, ISME – 2003

Ilmenite to Synthetic Rutile – Trends in Value Addition

Publisher : National Workshop and Seminar on Sustainable Development of Coastal Placer Minerals: Placer-2004

Mechanical, thermal and dielectric properties of cross-linked polyethylene nanocomposites

Publisher : Proceedings of the Third International Conference on Polymer Processing and Characterization (ICPPC 2014), International and Interuniversity Centre for Nanoscience and Nanotechnology

Design Validation of Injection Moulded Automotive Plastic Part using Moldflow Analysis

Publisher : National seminar Advances in Engineering Design-2005

Design of Experiments in Polymer Technology

Publisher : 19th Rubber Conference

Flow Analysis of an Automotive Component using Mold flow

Publisher : International Conference Advances in Polymer Technology

Advances in polymer based micro and nano composites

Publisher : International conference on Innovative Technologies (ICIT-09)

Process parameter optimisation in automobile component manufacture using Design of Experiments

Publisher : National Conference on Quality Improvement Concepts and their Implementation in Higher Educational Institutions

Synthesis and Characteristics of MMT Reinforced Chitosan Nanocomposite

Publisher : Proceedings of the 4th International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2019)” organized by Amrita Vishwa Vidyapeetham”

Studies on Novel Polythiourea and its Composites For Conducting Applications

Publisher : National Conference on Recent Trends in Polymer Science and Technology

Gamma Radiation and Hydrocarbon Ageing Effect on Mechanical Properties of EPDM – CIIR Hybrid Nanocomposites

Publisher : Proceedings of the Second International Conferences on Structural Integrity (ICONS-2018), Session VD Structural Integrity of Composite Materials.

Dielectric Properties, Thermal Characteristics and Degradation Kinetics of PMMA Nanodielectrics

Publisher : Proceedings of the 3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018)”

Experimental Study of Thermal and Mechanical Properties of UHMWPE – Graphite Nanocomposites

Publisher : Fourth International Conference on Nanostructured Materials and Nanocomposites organized by International and Inter University Centre for Nanoscience and Nanotechnology(IIUCNN),

Experimental Study of Thermal and Mechanical Properties of UHMWPE – Acid modified MWCNT Nanocomposites

Publisher : Proceedings of Fourth International Conference on Nanostructured Materials and Nanocomposites organized by International and Inter University Centre for Nanoscience and Nanotechnology(IIUCNN),

Optimizing the Properties of Nanoclay – Nitrile Rubber Composites using Box-Behnken Design

Publisher : Proceedings of ISAMPE National Conference 2009(INCCOM-8) “Emerging Trends in Composite Materials and Technology”

Optimization of Process Parameters of an Injection Moulded Gear Using Taguchi Method

Publisher : Annual Technical Conference (ANTEC 2006) organized by Society of Plastics Engineers

Optimisation of Process Parameters of an Injection Moulded Gear Using Taguchi Methodology

Publisher : International Conference on Resource Utilisation and Intelligent Systems INCRUIS-2006

Simulation of electric field distribution in nanodielectrics based on XLPE

Publisher : Proceedings of International Conference on Macromolecules: Synthesis, Morphology, Processing, Structure, properties and Applications ICM 2016 organized by International Unit on Macromolecular Science and Engineering (IUMSE)

Morphology and Thermal Properties of Microfibrillar Composites

Publisher : Annual Technical Conference (ANTEC 2006) organized by Society of Plastics Engineers

Mechanical behaviour of nanoclay–NBR composites

Publisher : Proceedings of Asia Rub Tech Expo. Cochin, India

Development of In situ Composites from Polypropylene/Poly ethylene Terephthalate blends

Publisher : International Conference and Exhibition on Reinforced Plastics ICERP-2006

Short natural fibre reinforced polyester composites : Property Optimization using DoE

Publisher : Proceedings of Innovations in Composites for the New Century, International and INCOMM-6 Conference on Future trends in Composite Materials and Processing

Microfibrillar In Situ Composites from Polymer Blends Morphology and Mechanical Properties Evaluation

Publisher : International and INCCOM-6 Conference Future Trends in Composite Materials and Processing

Journal Article

Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6Si-0.4Mg Alloy Using Response Surface Methodology

Publisher : International Journal of Surface Engineering and Interdisciplinary Materials Science

Modeling NBR- layered silicate nanocomposites: A DoE approach

Publisher : Journal of Applied Polymer Science

Impact, tear, and dielectric properties of cotton/polypropylene commingled composites

Publisher : Journal of Reinforced Plastics and Composites

A new approach for improved identification of measurement bias

Publisher : Computers Chemical Engineering

Polymer Nanocomposite Containing High Permittivity Nanoparticles for Energy Storage Application

Publisher : International Journal of Nanotechnology and Applications

Simulation of electric field distribution in nanodielectrics based on XLPE

Publisher : Proceedings of International Conference on Recent Advances in Nano Science and Technology 2015 (RAINSAT-2015)

Influence of multiphase fillers on the mechanical, transport and rheological properties of Polypropylene

Publisher : Materials Today Proceedings (Scopus), Elsevier Publications

Study on Silica Infused Recycled Aggregate Concrete Using Design of Experiments

Publisher : Journal of Engineering science and Technology

Physico-chemical Studies of Amoxycillin Loaded Sulfonated Polymer

Publisher : International Conference on Material Sciences SCICON’16, (Scopus)

Kodo Idly – Inside Out

Publisher : Trends in Biosciences

Carving of Idly from the batter

Publisher : Trends in Biosciences

Accelerated FFT computation for GNU radio using GPU of raspberry Pi

Publisher : Smart Innovation, Systems and Technologies

Polyaniline/Fe3O4-RGO Nanocomposites for Microwave Absorption

Publisher : IOP Conference Series: Materials Science and Engineering. (Proceedings of International Conference on Advances in Materials and Manufacturing Applications 2017, IConAMMA 2017, August 17- 19, 2017, Bengaluru, 2017)

Performance analysis of microstrip antenna using GNU radio with USRP N210

Publisher : Smart Innovation, Systems and Technologies

Applications of Fluorescent Makers

Publisher : J. Environ. Nanotechnol

Strengthening of Plain Concrete Cylinders with Natural FRP Composite Systems

Publisher : Iranian Journal of Science and Technology, Transactions of Civil Engineering

Experimental and micromechanical modeling of fracture toughness

Publisher : Journal of Thermoplastic Composite Materials

Measurement bias detection in linear dynamic systems

Publisher : Computers chemical engineering

Addressing Higher Order Serial Correlation in Techniques for Gross Error Detection

Publisher : Special Issue on Intelligent Computing : Journal of Computational and Theoretical Nanoscience

Comparative Analysis of Select Techniques and Metrics for Data Reconciliation

Publisher : Recent Advancements in Chemical, Environmental and Energy Engineering RACEEE 2019 (Submitted April 2019), special issue of Chemical Engineering Communications.

Dielectric Properties, Thermal Characteristics and Degradation Kinetics of PMMA Nanodielectrics

Publisher : Proceedings of the 3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018)”

Other

Mechanical properties and morphology of nanoclay-filled different TPU/PP blends

Publisher : Polymer-Plastics Technology and Engineering

The Electrochemistry of Hydrogen Storage Materials

Publisher : Journal of Materials Chemistry

Performance of a vertical subsurface flow constructed wetland in treating biomethanation effluent

Publisher : GHTC 2016 – IEEE Global Humanitarian Technology Conference: Technology for the Benefit of Humanity, Conference Proceedings

Fluorescence Analysis: From Sensing to Imaging.

Publisher : Journal of Analytical Methods in Chemistry

Characterization of nanoclay filled polymer blends

Publisher : SPE Plastics research: Online: Plastics Nanotechnology

Multicomponent Mg based Hydrogen storage materials

Publisher : Advances in Dutch Hydrogen and Fuel Cell Research

Kinetics and sub sieve morphology of ball mill grinding for different grades of Indian coals

Publisher : International Journal of Oil, Gas and Coal Technology

An Activatable Prodrug for the Treatment of Metastatic Tumors

Publisher : Journal of the American Chemical Society

Synthesis and characterization of graphene quantum dots/cobalt ferrite nanocomposite

Publisher : IOP Conference Series: Materials Science and Engineering

Resorufin based fluorescent “turn-on” chemodosimeter for nitrosyl (HNO)

Publisher : RSC Advances – An international journal to further the chemical sciences

An activatable theranostic for targeted cancer therapy and imaging

Publisher : Angewandte Chemie International Edition

Liver directing uridine-based paramagnetic amphiphilic T1 MRI contrast agent with high relaxivity

Publisher : Proceedings of the international society for magnetic resonance in medicine

Diagnostic Significance of pH-Responsive Gd3+-Based T1 MR Contrast Agents

Publisher : Investigative Magnetic Resonance Imaging

Admissions Apply Now