Year : 2025
Engineering a heterogeneous catalyst with earth-abundant metal oxides for efficient one-pot synthesis of 2,5-furan dicarboxylic acid from agro-waste
Cite this Research Publication : N V Fathima Safeeda, Meera Balachandran, Udaya Bhaskar Reddy Ragula, Engineering a heterogeneous catalyst with earth-abundant metal oxides for efficient one-pot synthesis of 2,5-furan dicarboxylic acid from agro-waste, Journal of Environmental Chemical Engineering, Elsevier BV, 2025, https://doi.org/10.1016/j.jece.2025.115653
Publisher : Elsevier BV
Year : 2025
Implementation of RSM and ANN optimization approach for the valorization of agro-wastes to renewable plastic precursor FDCA over non-precious bimetal oxide functionalized heterogeneous catalyst
Cite this Research Publication : N V Fathima Safeeda, Meera Balachandran, Implementation of RSM and ANN optimization approach for the valorization of agro-wastes to renewable plastic precursor FDCA over non-precious bimetal oxide functionalized heterogeneous catalyst, Journal of Environmental Management, Elsevier BV, 2025, https://doi.org/10.1016/j.jenvman.2025.125026
Publisher : Elsevier BV
Year : 2025
Synergistic Cr–Co metal oxide catalysis on molecular sieve support for cascade one-pot conversion of biomass derived cellulose to FDCA
Cite this Research Publication : N.V. Fathima Safeeda, Vadupu Sai Dharani, Kalle Indradeep, M. Karthikeyan, Jesús Esteban Serrano, Meera Balachandran, Synergistic Cr–Co metal oxide catalysis on molecular sieve support for cascade one-pot conversion of biomass derived cellulose to FDCA, Sustainable Chemistry and Pharmacy, Elsevier BV, 2025, https://doi.org/10.1016/j.scp.2025.102040
Publisher : Elsevier BV
Year : 2025
A Comprehensive Review of Ultra‐High Performance Thermoplastic Nano and Multiscale Composites for Structural, Aerospace and Nuclear Applications: Recent Developments, Current Challenges, and Future Trends
Cite this Research Publication : S. Ananthalakshmi, Meera Balachandran, Shantanu Bhowmik, A Comprehensive Review of Ultra‐High Performance Thermoplastic Nano and Multiscale Composites for Structural, Aerospace and Nuclear Applications: Recent Developments, Current Challenges, and Future Trends, Polymer Engineering & Science, Wiley, 2025, https://doi.org/10.1002/pen.70016
Publisher : Wiley
Year : 2024
Non-isothermal crystallization kinetics and activation energy modeling of carbon nanotubes dispersed high-density polyethylene and polypropylene blends
Cite this Research Publication : Ganesh Ram V, Krishna Prasad R, Meera Balachandran, Non-isothermal crystallization kinetics and activation energy modeling of carbon nanotubes dispersed high-density polyethylene and polypropylene blends, Fullerenes, Nanotubes and Carbon Nanostructures, Informa UK Limited, 2024, https://doi.org/10.1080/1536383x.2024.2406935
Publisher : Informa UK Limited
Year : 2024
Synergistic enhancement in mechanical properties of graphene/MWCNT reinforced Polyaryletherketone – carbon fiber multi-scale composites: Experimental studies and finite element analysis
Cite this Research Publication : Sarath Kumar Painkal, Meera Balachandran, Karingamanna Jayanarayanan, Nagaarjun Sridhar, Sanjeev Kumar, Synergistic Enhancement in Mechanical Properties of Graphene/MWCNT Reinforced Polyaryletherketone – Carbon Fiber Multiscale Composites: Experimental Studies and Finite Element Analysis, Advanced Industrial and Engineering Polymer Research, Volume 8, Issue 1, January 2025, Pages 20-36, https://doi.org/10.1016/j.aiepr.2024.02.002.
Publisher : Elsevier B.V.
Year : 2023
Static and dynamic mechanical properties of hybrid polymer composites: A comprehensive review of experimental, micromechanical and simulation approaches
Cite this Research Publication : Rasana N, Jayanarayanan Karingamanna, Sarath Kumar P, Meera Balachandran, Alessandro Pegoretti, “Static and dynamic mechanical properties of hybrid polymer composites: A comprehensive review of experimental, micromechanical and simulation approaches”, Composites Part A: Applied Science and Manufacturing, Volume 174, 2023, 107741, https://doi.org/10.1016/j.compositesa.2023.107741
Publisher : Elsevier
Year : 2023
High-performance thermoplastic polyaryletherketone/carbon fiber composites: Comparison of plasma, carbon nanotubes/graphene nano-anchoring, surface oxidation techniques for enhanced interface adhesion and properties
Cite this Research Publication : Sarath Kumar P, Karingamanna Jayanarayanan, Meera Balachandran, "High-performance thermoplastic polyaryletherketone/carbon fiber composites: Comparison of plasma, carbon nanotubes/ graphene nano-anchoring, surface oxidation techniques for enhanced interface adhesion and properties," Composites Part B: Engineering, Volume 253, 2023, 110560, ISSN 1359-8368, https://doi.org/10.1016/j.compositesb.2023.110560.
Publisher : Composites Part B : Engineering
Year : 2022
Performance comparison of carbon fiber reinforced polyaryletherketone and epoxy composites: Mechanical properties, failure modes, cryo‐thermal behavior, and finite element analysis
Cite this Research Publication : Painkal Sarath Kumar, Karingamanna Jayanarayanan, Meera Balachandran, Performance comparison of carbon fiber reinforced polyaryletherketone and epoxy composites: Mechanical properties, failure modes, cryo‐thermal behavior, and finite element analysis, Journal of Applied Polymer Science, Wiley, 2022, https://doi.org/10.1002/app.52494
Publisher : Wiley
Year : 2022
Synergistic effect of carbon fabric and multiwalled carbon nanotubes on the fracture, wear and dynamic load response of epoxy-based multiscale composites
Cite this Research Publication : Sarath Kumar, P., Jayanarayanan, K., Deeraj, B.D.S, Kuruvila Joseph, Meera Balachandran, “Synergistic effect of carbon fabric and multiwalled carbon nanotubes on the fracture, wear and dynamic load response of epoxy-based multiscale composites”. Polymer Bulletin, 79, pages 5063–5084 (2022). https://doi.org/10.1007/s00289-021-03742-6
Publisher : Polymer Bulletin
Year : 2021
Nano-reinforcement mechanism of organomodified layered silicates in EPDM/CIIR blends: experimental analysis and theoretical perspectives of static mechanical and viscoelastic behavior
Cite this Research Publication : Neelesh Ashok, Meera Balachandran, Narayan Chandra Das and Sanjay Remanan “Nano-reinforcement mechanism of organomodified layered silicates in EPDM/CIIR blends: Experimental analysis and theoretical perspectives of static mechanical and viscoelastic behavior”, Composite interfaces, 2021, 28(1), pp. 35–62. DOI: 10.1080/09276440.2020.1736879.
Publisher : Composite Interfaces
Year : 2021
Influence of T6 heat treatment analysis on the tribological behaviour of cast al-12.2Si-0.3 Mg-0.2Sr alloy using response surface methodology
Cite this Research Publication : Shankar, K. V., Balachandran, M., Pillai, B. S., Krishnanunni, S. R., Harikrishnan, N. S., Harinarayanan, A. R., & Kumar, V. S. (2021). Influence of T6 heat treatment analysis on the tribological behaviour of cast al-12.2Si-0.3 Mg-0.2Sr alloy using response surface methodology. Journal of Bio- and Tribo-Corrosion, 7(3) doi:10.1007/s40735-021-00531-6
Publisher : Springer, Journal of Bio- and Tribo-Corrosion
Year : 2021
Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite using Response Surface Methodology
Cite this Research Publication : Anilkumar V, Karthik V Shankar, Meera Balachandran, Joiet Joseph, Nived S, Jayanandan J, Jayagopan J, Surya Balaji U S, “Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite using Response Surface Methodology”, Tribology in Industry, 2021, 43(4), pp. 590–602 DOI: 10.24874/ti.988.10.20.04.
Publisher : Tribology in Industry
Year : 2021
Synergistic enhancement of mechanical, viscoelastic, transport, thermal and radiation ageing characteristics through chemically bonded interface in nanosilica reinforced EPDM-CIIR blends
Cite this Research Publication : Neelesh Ashok, Karthikeyan Prakash, Deepika Selvakumar, Meera Balachandran, “Synergistic enhancement of mechanical, viscoelastic, transport, thermal and radiation ageing characteristics through chemically bonded interface in nanosilica reinforced EPDM-CIIR blends”, Journal of Applied Polymer Science, 2021, 138(12), 50082; DOI: 10.1002/app.20201087.
Publisher : Journal of Applied Polymer Science
Year : 2021
Influence of argon plasma treatment on carbon fibre reinforced high performance thermoplastic composite
Cite this Research Publication : Jennifer Vinodhini, K Sudheendra, Meera Balachandran, Shantanu Bhowmik, Influence of argon plasma treatment on carbon fibre reinforced high performance thermoplastic composite, High Performance Polymers, 2021, 33(3), pp. 285–294, DOI : 10.1177/0954008320957062
Publisher : High Performance Polymers
Year : 2020
Synthesis and characteristics of MMT reinforced chitosan nanocomposite
Cite this Research Publication : S. Bhagath, Vivek, A., V. Krishna, V., Mittal, S. Sagar, and Dr. Meera Balachandran, “Synthesis and characteristics of MMT reinforced chitosan nanocomposite”, Materials Today: Proceedings, 2020.
Publisher : Materials Today: Proceedings
Year : 2020
The influence of MWCNT and hybrid (MWCNT/nanoclay) fillers on performance of EPDM-CIIR blends in nuclear applications: Mechanical, hydrocarbon transport, and gamma-radiation aging characteristics
Cite this Research Publication : A. Neelesh, Vidhyashree, S., and Dr. Meera Balachandran, “The influence of MWCNT and hybrid (MWCNT/nanoclay) fillers on performance of EPDM-CIIR blends in nuclear applications: Mechanical, hydrocarbon transport, and gamma-radiation aging characteristics”, Journal of Applied Polymer Science, vol. 137, p. 49271, 2020.
Publisher : Journal of Applied Polymer Science
Year : 2020
Determining the Significance of Cobalt Addition on the Wear Characteristics of Al-6.6Si-0.4Mg Hypoeutectic Alloy Using Design of Experiment
Cite this Research Publication : E. P. Sreedev, Govind, H. K., P, A., Adithyan, S., Narayan, H. A., Shankar, K. V., and Dr. Meera Balachandran, “Determining the Significance of Cobalt Addition on the Wear Characteristics of Al-6.6Si-0.4Mg Hypoeutectic Alloy Using Design of Experiment”, Tribology in Industry, vol. 42, pp. 299-309, 2020.
Publisher : Tribology in Industry
Year : 2020
Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6Si-0.4Mg Alloy Using Response Surface Methodology
Cite this Research Publication : V. Kumar, Kumar, V., Menon, G., Bimaldev, S., Sankar, M., Shankar, K., and Dr. Meera Balachandran, “Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6Si-0.4Mg Alloy Using Response Surface Methodology”, International Journal of Surface Engineering and Interdisciplinary Materials Science, vol. 8, pp. 66-79, 2020.
Publisher : International Journal of Surface Engineering and Interdisciplinary Materials Science
Year : 2020
Nanosilica reinforced EPDM silicone rubber blends: Experimental and theoretical evaluation of mechanical and solvent sorption properties
Cite this Research Publication : A. Ravindran, Kamaraj, M., Vasanthmurali, N., Meghavarshini, V., and Dr. Meera Balachandran, “Nanosilica reinforced EPDM silicone rubber blends: Experimental and theoretical evaluation of mechanical and solvent sorption properties”, Materials Today: Proceedings, 2020.
Publisher : Materials Today: Proceedings
Year : 2020
Thermal and Mechanical Behavior of Functionalized MWCNT Reinforced Epoxy Carbon Fabric Composites
Cite this Research Publication : S. P. Kumar, Dr. Jayanarayanan K., and Dr. Meera Balachandran, “Thermal and Mechanical Behavior of Functionalized MWCNT Reinforced Epoxy Carbon Fabric Composites”, Materials Today Proceedings (in press)., vol. Volume 24, pp. p.1157 - 1166 (2020), 2020.
Publisher : Materials Today Proceedings
Year : 2019
Response surface modeling and optimization of process variables for Amiodarone and Levetiracetam removal from synthetic pharmaceutical industry effluent employing heterogeneous photocatalysis
Cite this Research Publication : Prakash Chinnaiyan, Thampi, S. G., MathavaKumar,, and Dr. Meera Balachandran, “Response surface modeling and optimization of process variables for Amiodarone and Levetiracetam removal from synthetic pharmaceutical industry effluent employing heterogeneous photocatalysis”, Desalination and Water Treatment, vol. 170, pp. 253-264, 2019.
Publisher : Desalination and Water Treatment,
Year : 2019
XLPE – Layered Silicate Nanocomposites for High Voltage Insulation Applications: Mechanical and Treeing Behavior
Cite this Research Publication : Dr. Meera Balachandran and Viswakumar, K., “XLPE – Layered Silicate Nanocomposites for High Voltage Insulation Applications: Mechanical and Treeing Behavior”, IET Science, Measurement & Technology, vol. 13, 2019.
Publisher : IET Science, Measurement & Technology
Year : 2019
XLPE – layered silicate nanocomposites for high voltage insulation applications: dielectric characteristics, treeing behaviour and mechanical properties
Cite this Research Publication : D. Kavitha and Dr. Meera Balachandran, “XLPE – layered silicate nanocomposites for high voltage insulation applications: dielectric characteristics, treeing behaviour and mechanical properties”, IET Science, Measurement Technology, vol. 13, pp. 1019-1025, 2019.
Publisher : IET Science, Measurement Technology
Year : 2018
Photocatalytic degradation of metformin and amoxicillin in synthetic hospital wastewater: effect of classical parameters
Cite this Research Publication : Prakash Chinnaiyan, S.G. Thampi, M. Kumar, and Dr. Meera Balachandran, “Photocatalytic Degradation of Metformin and Amoxicillin in Synthetic Hospital Wastewater: Effect of Classical Parameters”, International Journal of Environmental Science and Technology, 2018.
Publisher : International Journal of Environmental Science and Technology
Year : 2018
Organo-modified layered silicate nanocomposites of EPDM–chlorobutyl rubber blends for enhanced performance in γ radiation and hydrocarbon environment
Cite this Research Publication : N. Ashok, Dr. Meera Balachandran, and Lawrence, F., “Organo-modified layered silicate nanocomposites of EPDM–chlorobutyl rubber blends for enhanced performance in γ radiation and hydrocarbon environment”, Journal of Composite Materials, vol. 52, pp. 3219-3231, 2018.
Publisher : Journal of Composite Materials
Year : 2018
Mechanical and sorption behaviour of organo-modified montmorillonite nanocomposites based on EPDM – NBR Blends
Cite this Research Publication : N. Ashok, Webert, D., Suneesh, P. V., and Dr. Meera Balachandran, “Mechanical and sorption behaviour of organo-modified montmorillonite nanocomposites based on EPDM - NBR Blends”, Materials Today: Proceedings, vol. 5, no. 8, pp. 16132-16140, 2018.
Publisher : Materials Today: Proceedings
Year : 2018
Investigation and Optimization of Mechanical, Thermal and Tribological Properties of UHMWPE – Graphite Nanocomposites
Cite this Research Publication : S. Narendra K. Reddy, Unnikrishnan D., and Dr. Meera Balachandran, “Investigation and Optimization of Mechanical, Thermal and Tribological Properties of UHMWPE – Graphite Nanocomposites”, Materials Today: Proceedings, vol. 5, pp. 25139 - 25148, 2018.
Publisher : Materials Today: Proceedings .
Year : 2018
Influence of admixtures on properties of concrete and optimization using response surface methodology
Cite this Research Publication : S. Vasudevan, Poornima V., and Dr. Meera Balachandran, “Influence of admixtures on properties of concrete and optimization using response surface methodology”, Proceedings of the 3rd International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018). Amrita Vishwa Vidyapeetham ,Bangalore, India, 2018.
Publisher : Proceedings of the 3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018)
Year : 2018
Dielectric Properties, Thermal Characteristics and Degradation Kinetics of PMMA Nanodielectrics
Cite this Research Publication : P. Raga Sreehitha, Durga, B., and Dr. Meera Balachandran, “Dielectric Properties, Thermal Characteristics and Degradation Kinetics of PMMA Nanodielectrics”, Materials Today: Proceedings, vol. 24 Part 2, pp. 772 - 781, 2020.
Publisher : Proceedings of the 3rd International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018)"
Year : 2018
Cure and Degradation Kinetics of Sulfur Cured Nanocomposites of EPDM-NBR Rubber Blends
Cite this Research Publication : S. K. Tajamul Basha, Divya, R., Menon, A. U., Ashok, N., Dr. Meera Balachandran, S., B., and S.R., N., “Cure and Degradation Kinetics of Sulfur Cured Nanocomposites of EPDM-NBR Rubber Blends”, Materials Today: Proceedings, vol. 5, pp. 23586-23595, 2018.
Publisher : Materials Today: Proceedings
Year : 2017
EPDM – Chlorobutyl Rubber Blends in γ-Radiation and Hydrocarbon Environment: Mechanical, Transport and Ageing Behavior
Cite this Research Publication : Neelesh Ashok, Meera Balachandran, Neethu Sebastian and Falix Lawrence, “EPDM – Chlorobutyl Rubber Blends in γ-Radiation and Hydrocarbon Environment: Mechanical, Transport and Ageing Behavior”, Journal of Applied Polymer Science, 134 (33) : 45195, 2017. DOI: 10.1002/app.45195. (IF: 2.52)
Publisher : Journal of Applied Polymer Science
Year : 2017
Study on Silica Infused Recycled Aggregate Concrete Using Design of Experiments
Cite this Research Publication : P. .M.Mrudul, .Upender, T., Tarun, V., Dr. Meera Balachandran, and Dr. Mini K. M., “Study on Silica Infused Recycled Aggregate Concrete Using Design of Experiments”, Journal of Engineering science and Technology, vol. 12, no. 10, 2017.
Publisher : Journal of Engineering science and Technology
Year : 2017
Process Optimization of Functionalized MWCNT/Polyetherimide Nanocomposites for Aerospace Application
Cite this Research Publication : Shantanu Bhowmik, Mohan Kumar Pitchan, Dr. Meera Balachandran, and Abraham, M., “Process Optimization of Functionalized MWCNT/Polyetherimide Nanocomposites for Aerospace Application”, Journal of Materials and Design, vol. 127, pp. 193-203, 2017.
Publisher : Journal of Materials and Design
Year : 2017
Polymer Nanocomposite Containing High Permittivity Nanoparticles for Energy Storage Application
Cite this Research Publication : V. K. Sahithya, Kavitha, D., Dr. Meera Balachandran, and Kumar, M., “Polymer Nanocomposite Containing High Permittivity Nanoparticles for Energy Storage Application”, International Journal of Nanotechnology and Applications, vol. 11, pp. 305-318, 2017.
Publisher : International Journal of Nanotechnology and Applications.
Year : 2017
EPDM-chlorobutyl rubber blends in γ-radiation and hydrocarbon environment: Mechanical, transport, and ageing behavior
Cite this Research Publication : N. Ashok, Dr. Meera Balachandran, Lawrence, F., and Sebastian, N., “EPDM-chlorobutyl rubber blends in γ-radiation and hydrocarbon environment: Mechanical, transport, and ageing behavior”, Journal of Applied Polymer Science, 2017.
Publisher : Journal of Applied Polymer Science
Year : 2016
Response surface methodology: A tool for assessing the role of compounding ingredients in peroxide vulcanization of natural rubber
Cite this Research Publication : Ra Rajan, Varghese, Sa, Dr. Meera Balachandran, and George, K. Ec, “Response surface methodology: A tool for assessing the role of compounding ingredients in peroxide vulcanization of natural rubber”, Rubber Chemistry and Technology, vol. 89, pp. 211-226, 2016.
Publisher : Rubber Chemistry and Technology
Year : 2016
Effect of Surface Functionalization on Mechanical Properties and Decomposition Kinetics of High Performance Polyetherimide/MWCNT Nano Composites
Cite this Research Publication : Mohan Kumar Pitchan, Shantanu Bhowmik, Dr. Meera Balachandran, and Abraham, M., “Effect of Surface Functionalization on Mechanical Properties and Decomposition Kinetics of High Performance Polyetherimide/MWCNT Nano Composites”, Journal of Composites Part A Applied Science and Manufacturing, vol. 90, pp. 147-160, 2016.
Publisher : Journal of Composites Part A Applied Science and Manufacturing
Year : 2015
Modeling of Electric Field Distribution and Electric Tree Propagation in Epoxy Nanocomposites using Finite Element Method
Cite this Research Publication : D. Kavitha, T. N. P. Nambiar, Dr. Meera Balachandran, and SINDHU, T. K., “Modeling of Electric Field Distribution and Electric Tree Propagation in Epoxy Nanocomposites using Finite Element Method”, Journal of Electrical Engineering, 2015.
Publisher : Journal of Electrical Engineering
Year : 2015
Kodo Idly – Inside Out
Cite this Research Publication : D. Susan, Vishvanathan, R., .E, P., and Dr. Meera Balachandran, “Kodo Idly – Inside Out”, Trends in Biosciences, vol. 8, no. 10, pp. 2638-2646, 2015.
Publisher : Trends in Biosciences
Year : 2015
Carving of Idly from the batter
Cite this Research Publication : D. Susan, .E, P., Vishvanathan, R., and Dr. Meera Balachandran, “Carving of Idly from the batter”, Trends in Biosciences , vol. 8, no. 10, pp. 2631-2637, 2015.
Publisher : Trends in Biosciences
Year : 2012
Optimizing properties of nanoclay–nitrile rubber (NBR) composites using Face Centred Central Composite Design
Cite this Research Publication : Dr. Meera Balachandran, Devanathan, S., Muraleekrishnan, R., and Bhagawan, S. S., “Optimizing properties of nanoclay–nitrile rubber (NBR) composites using Face Centred Central Composite Design”, Materials & Design - MATER DESIGN, vol. 35, 2012.
Publisher : Materials & Design - MATER DESIGN
Year : 2012
Optimizing properties of nanoclay-nitrile rubber (NBR) composites using Face Centred Central Composite Design
Cite this Research Publication : Dr. Meera Balachandran, Dr. Sriram Devanathan, Muraleekrishnan, Rb, and Bhagawan, S. Sa, “Optimizing properties of nanoclay-nitrile rubber (NBR) composites using Face Centred Central Composite Design”, Materials and Design, vol. 35, pp. 854-862, 2012.
Publisher : Materials and Design
Year : 2012
Mechanical, thermal, and transport properties of nitrile rubber-nanocalcium carbonate composites
Cite this Research Publication : Dr. Meera Balachandran and Bhagawan, S. S., “Mechanical, thermal, and transport properties of nitrile rubber-nanocalcium carbonate composites”, Journal of Applied Polymer Science, vol. 126, pp. 1983-1992, 2012.
Publisher : Journal of Applied Polymer Science
Year : 2012
Mechanical, thermal and transport properties of nitrile rubber (NBR)-Nanoclay composites
Cite this Research Publication : Dr. Meera Balachandran and Bhagawan, S. S., “Mechanical, thermal and transport properties of nitrile rubber (NBR)-Nanoclay composites”, Journal of Polymer Research, vol. 19, pp. 1-10, 2012.
Publisher : Journal of Polymer Research
Year : 2011
Modeling and Optimizing Properties of Nanoclay – Nitrile Rubber (NBR) Composites Using Box-Behnken Design
Cite this Research Publication : Dr. Meera Balachandran, Bhagawan, S. S., and Muraleekrishnan, R., “Modeling and Optimizing Properties of Nanoclay - Nitrile Rubber (NBR) Composites Using Box-Behnken Design”, Rubber Chemistry and Technology, vol. 84, no. 4, pp. 455 - 473, 2011.
Publisher : Rubber Chemistry and Technology
Year : 2011
Studies on acrylonitrile-butadiene copolymer (NBR) layered silicate composites: Mechanical and viscoelastic properties
Cite this Research Publication : Dr. Meera Balachandran and Bhagawan, S. S., “Studies on acrylonitrile-butadiene copolymer (NBR) layered silicate composites: Mechanical and viscoelastic properties”, Journal of Composite Materials, vol. 45, no. 19, pp. 2011-2022, 2011.
Publisher : Journal of Composite Materials
Year : 2011
Modeling and optimizing properties of nanoclay-nitrile rubber composites using box-behnken design
Cite this Research Publication : Dr. Meera Balachandran, Bhagawan, S. Sa, and Muraleekrishnan, Rb, “Modeling and optimizing properties of nanoclay-nitrile rubber composites using box-behnken design”, Rubber Chemistry and Technology, vol. 84, no. 4, pp. 455-473, 2011.
Publisher : Rubber Chemistry and Technology
Year : 2010
Modeling NBR- layered silicate nanocomposites: A DoE approach
Cite this Research Publication : Dr. Meera Balachandran, Stanly, L. P., Mulaleekrishnan, R., and Bhagawan, S. S., “Modeling NBR- layered silicate nanocomposites: A DoE approach”, Journal of Applied Polymer Science, vol. 118, pp. 3300-3310, 2010.
Publisher : Journal of Applied Polymer Science