Back close

Dr. B. Venkataraman

Distinguished Professor, Department of Mechanical Engineering, Coimbatore

b_venkataraman@cb.amrita.edu
Google Scholar Profile

Bio

Dr. B. Venkataraman has received M.Sc. (Physics) from Madurai – Kamaraj University, M. Tech (Materials Science & Technology), and Ph.D. (Metallurgical Engineering), both from Banaras Hindu University. For 35 years, he has been working as a scientist at Defence Metallurgical Research Laboratory (DMRL). Dr. Venkataraman made extensive contributions in the field of Tribology and Surface Engineering. He has published over 40 papers in Scopus-indexed journals. He spearheaded a program for developing a variety of coatings for an indigenous acro engine. As a part of his research, he developed several sophisticated experimental techniques such as an abradable test rig, high-velocity gas gun, high-temperature high-stress tribo test rig, etc. He has delivered several invited lectures at national and international conferences. He has served as an expert member onseveral project review boards/committees of DRDO, DST, and CSIR.

Publications

Journal Article

Year : 2023

Development of Tribological Coatings for Aerospace and Missile Applications

Cite this Research Publication : JKN Murthy, B Venkataraman, Gokul Lakshmi, M Ramakrishna, "Development of Tribological Coatings for Aerospace and Missile Applications", Defence Science Journal Volume 73 Issue 2, 2023

Year : 2022

Laser Sintered Ti-6Al-4V Alloy Coated with Plasma Electrolytic Oxidation: Influence of Duty Cycle and Frequency on Morphological, Structural, and Corrosion Properties

Cite this Research Publication : C Premchand, E Lokeshkumar, P Manojkumar, B Ravisankar, L Rama Krishna, B Venkataraman, N Rameshbabu, "Laser Sintered Ti-6Al-4V Alloy Coated with Plasma Electrolytic Oxidation: Influence of Duty Cycle and Frequency on Morphological, Structural, and Corrosion Properties", Journal of Materials Engineering and Performance Volume 31 Issue 10 Pages 7955-7963, 2022

Publisher : Springer US

Year : 2021

Assessment of corrosion and scratch resistance of plasma electrolytic oxidation and hard anodized coatings fabricated on AA7075-T6

Cite this Research Publication : C Premchand, S Hariprasad, A Saikiran, E Lokeshkumar, P Manojkumar, B Ravisankar, B Venkataraman, N Rameshbabu, "Assessment of corrosion and scratch resistance of plasma electrolytic oxidation and hard anodized coatings fabricated on AA7075-T6", Transactions of the Indian Institute of Metals Volume 74 Issue 8 Pages 1991-2002, 2021

Publisher : Springer India

Year : 2019

Room temperature and 600 C erosion behaviour of various chromium carbide composite coatings

Cite this Research Publication : L Venkatesh, B Venkataraman, Manish Tak, G Sivakumar, Ravi C Gundakaram, Shrikant V Joshi, I Samajdar, "Room temperature and 600 C erosion behaviour of various chromium carbide composite coatings", Wear Volume 422 Pages 44-53, 2019

Publisher : Elsevier

Year : 2017

Comparison of high-strain rate behaviour of OFHC Copper using dynamic indentation and split Hopkinson pressure bar techniques

Cite this Research Publication : Rajnish Goyal, B Venkataraman, "Comparison of high-strain rate behaviour of OFHC Copper using dynamic indentation and split Hopkinson pressure bar techniques", Procedia engineering Volume 173 Pages 830-836, 2017

Publisher : Elsevier

Year : 2016

High-temperature stability of yttria-stabilized zirconia thermal barrier coating on niobium alloy—C-103

Cite this Research Publication : SS Panwar, T Umasankar Patro, K Balasubramanian, B Venkataraman, "High-temperature stability of yttria-stabilized zirconia thermal barrier coating on niobium alloy—C-103", Bulletin of Materials Science Volume 39 Pages 321-329, 2016

Publisher : Indian Academy of Sciences

Year : 2015

Hot Air Erosion Studies of Yttria-Stabilized Zirconia Thermal Barrier Coated Niobium Alloy

Cite this Research Publication : SS Panwar, T Umasankar Patro, Naveed Ali, K Balasubramanian, B Venkataraman, "Hot Air Erosion Studies of Yttria-Stabilized Zirconia Thermal Barrier Coated Niobium Alloy", Materials Focus Volume 4 Issue 6 Pages 421-432, 2015

Publisher : American Scientific Publishers

Year : 2015

On the occurrence of dynamic strain aging in C-103 Nb based alloy

Cite this Research Publication : SS Panwar, Kartik Prasad, T Umasankar Patro, K Balasubramanian, B Venkataraman, "On the occurrence of dynamic strain aging in C-103 Nb based alloy", Materials Science and Engineering: A Volume 620 Pages 286-292, 2015

Publisher : Elsevier

Year : 2012

Erosion behaviour of plasma sprayed Alumina and Calcia Stabilized zirconia coatings on Cast iron Substrate

Cite this Research Publication : N Krishnamurthy, MS Murali, B Venkataraman, PG Mukunda, "Erosion behaviour of plasma sprayed Alumina and Calcia Stabilized zirconia coatings on Cast iron Substrate", Ceramic Coatings-App. lications in Engineering Pages 99-126, 2012

Year : 2012

Characterization and solid particle erosion behavior of plasma sprayed alumina and calcia-stabilized zirconia coatings on Al-6061 substrate

Cite this Research Publication : N Krishnamurthy, MS Murali, B Venkataraman, PG Mukunda, "Characterization and solid particle erosion behavior of plasma sprayed alumina and calcia-stabilized zirconia coatings on Al-6061 substrate", Wear Volume 274 Pages 15-27, 2012

Publisher : Elsevier

Year : 2010

Effect of cyclic oxidation on the tensile behavior of directionally solidified CM-247LC Ni-based superalloy at 870° C

Cite this Research Publication : Md Zafir Alam, D Chatterjee, B Venkataraman, Vijay K Varma, Dipak K Das, "Effect of cyclic oxidation on the tensile behavior of directionally solidified CM-247LC Ni-based superalloy at 870° C", Materials Science and Engineering: A Volume 527 Issue 23 Pages 6211-6218, 2010

Publisher : Elsevier

Year : 2010

Characterisation of HVOF sprayed Cr3C2-50 (Ni20Cr) coating and the influence of binder properties on solid particle erosion behaviour

Cite this Research Publication : JKN Murthy, K Satya Prasad, K Gopinath, B Venkataraman, "Characterisation of HVOF sprayed Cr3C2-50 (Ni20Cr) coating and the influence of binder properties on solid particle erosion behaviour", Surface and Coatings Technology Volume 204 Issue 24 Pages 3975-3985, 2010

Publisher : Elsevier

Year : 2010

Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings

Cite this Research Publication : MR Ramesh, Satya Prakash, SK Nath, Pawan Kumar Sapra, B Venkataraman, "Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings", Wear Volume 269 Issue 3-4 Pages 197-205, 2010

Publisher : Elsevier

Year : 2009

Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition

Cite this Research Publication : Ashok K Ray, G Krishna, J Swaminathan, SC Bose, Nilima Roy, YN Tiwari, PK Roy, Z Alam, VSRA Sharma, B Venkatraman, DK Das, "Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition", High Temperature Materials and Processes Volume 28 Issue 1-2 Pages 35-54, 2009

Publisher : De Gruyter

Year : 2009

Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade

Cite this Research Publication : Ashok Kumar Ray, Nilima Roy, Abhijit Kar, Ajoy Kumar Ray, Samir Chandra Bose, Gautam Das, Jitendra Kumar Sahu, Dipak Kumar Das, B Venkataraman, Srikanth V Joshi, "Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade", Materials Science and Engineering: A Volume 505 Issue 1-2 Pages 96-104, 2009

Publisher : Elsevier

Year : 2009

MoSi2 coating on Mo substrate for short-term oxidation protection in air

Cite this Research Publication : Md Zafir Alam, B Venkataraman, Bijoy Sarma, Dipak K Das, "MoSi2 coating on Mo substrate for short-term oxidation protection in air", Journal of alloys and compounds Volume 487 Issue 1-2 Pages 335-340, 2009

Publisher : Elsevier

Year : 2008

A scanning electron microscopic study to observe the changes in the growth morphology of the α phased Alumina–13 wt.% titania coatings during plasma spraying

Cite this Research Publication : R Venkataraman, S Pabla Singh, B Venkataraman, DK Das, LC Pathak, S Ghosh Chowdhury, RN Ghosh, D Ravichandra, GV Narasima Rao, Keasavan Nair, Rajesh Kathirkar, "A scanning electron microscopic study to observe the changes in the growth morphology of the α phased Alumina–13 wt.% titania coatings during plasma spraying", Surface and Coatings Technology Volume 202 Issue 21 Pages 5074-5083, 2008

Publisher : Elsevier

Year : 2007

Tribology and Oxidation Resistant Coatings for Aero-Engine Applications

Cite this Research Publication : B Venkataraman, DK Das, JKN Murthy, MZ Alam, "Tribology and Oxidation Resistant Coatings for Aero-Engine Applications", METALS MATERIALS AND PROCESSES Volume 19 Issue 1/4 Pages 347, 2007

Publisher : MESHAP SCIENCE PUB

Year : 2007

Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings

Cite this Research Publication : R Venkataraman, Goutam Das, SR Singh, LC Pathak, RN Ghosh, B Venkataraman, R Krishnamurthy, "Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings", Materials Science and Engineering: A Volume 445 Pages 269-274, 2007

Publisher : Elsevier

Year : 2007

Microstructure dependent erosion in Cr3C2–20 (NiCr) coating deposited by a detonation gun

Cite this Research Publication : JKN Murthy, S Bysakh, K Gopinath, B Venkataraman, "Microstructure dependent erosion in Cr3C2–20 (NiCr) coating deposited by a detonation gun", Surface and coatings technology Volume 202 Issue 1 Pages 1-12, 2007

Publisher : Elsevier

Year : 2006

Image processing and statistical analysis of microstructures of as plasma sprayed Alumina–13 wt.% Titania coatings

Cite this Research Publication : R Venkataraman, Gautam Das, B Venkataraman, GV Narashima Rao, R Krishnamurthy, "Image processing and statistical analysis of microstructures of as plasma sprayed Alumina–13 wt.% Titania coatings", Surface and Coatings Technology Volume 201 Issue 6 Pages 3691-3700, 2006

Publisher : Elsevier

Year : 2006

Erosion performance of coatings produced by shrouded plasma spray process on a Co-based superalloy

Cite this Research Publication : SB Mishra, K Chandra, S Prakash, B Venkataraman, "Erosion performance of coatings produced by shrouded plasma spray process on a Co-based superalloy", Surface and Coatings Technology Volume 201 Issue 3-4 Pages 1477-1487, 2006

Publisher : Elsevier

Year : 2006

Effect of temperature on constraint factor of Ti–6Al–4V under static indentation conditions

Cite this Research Publication : A Kumaraswamy, B Venkataraman, "Effect of temperature on constraint factor of Ti–6Al–4V under static indentation conditions", Scripta materialia Volume 54 Issue 3 Pages 493-498, 2006

Publisher : Pergamon

Year : 2006

Abrasive wear behaviour of WC–CoCr and Cr3C2–20 (NiCr) deposited by HVOF and detonation spray processes

Cite this Research Publication : JKN Murthy, B Venkataraman, "Abrasive wear behaviour of WC–CoCr and Cr3C2–20 (NiCr) deposited by HVOF and detonation spray processes", Surface and Coatings Technology Volume 200 Issue 8 Pages 2642-2652, 2006

Publisher : Elsevier

Year : 2005

The Influence Of Substrate On Partially Rapidly Solidified Alumina-3 wt% titania Nanocrystalline Coatings Deposited by Plasma Spray Technique

Cite this Research Publication : R Venkataraman, B Parmanick, B Ravikumar, LC Pathak, DK Das, B Venkataraman, "The Influence Of Substrate On Partially Rapidly Solidified Alumina-3 wt% titania Nanocrystalline Coatings Deposited by Plasma Spray Technique", MRS Online Proceedings Library (OPL) Volume 890 Pages 0890-Y02-08, 2005

Publisher : Cambridge University Press

Year : 2005

EFFECT OF HIGH TEMPERATURE EXPOSURE OF Cr 3 C 2-20 (NiCr) COATING ON THE EROSION BEHAVIOUR

Cite this Research Publication : B Venkataraman, JKN Murthy, Sandeep Bysakh, "EFFECT OF HIGH TEMPERATURE EXPOSURE OF Cr 3 C 2-20 (NiCr) COATING ON THE EROSION BEHAVIOUR", Transactions of the Indian Institute of Metals Volume 58 Issue 5, 2005

Year : 2005

PHASE TRANSFORMATIONS STUDIES OF AS PLASMA SPRAYED ALUMINA-TITANIA TYPE COATINGS

Cite this Research Publication : R Venkataraman, Ansu Kaliath, SR Singh, BS Murty, DK Das, B Venkataraman, "PHASE TRANSFORMATIONS STUDIES OF AS PLASMA SPRAYED ALUMINA-TITANIA TYPE COATINGS", Transactions of the Indian Institute of Metals Volume 58 Issue 5, 2005

Year : 2005

MULTIVARIATE ANALYSIS OF A PLASMA SPRAYED Al-13 wt% TITANIA COATINGS

Cite this Research Publication : R Venkataraman, J Swaminathan, Gautham Das, R Krishnamurthy, Raman Srinivas, BK Das, B Venkatraman, "MULTIVARIATE ANALYSIS OF A PLASMA SPRAYED Al-13 wt% TITANIA COATINGS", Transactions of the Indian Institute of Metals Volume 58 Issue 5, 2005

Year : 2005

Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners

Cite this Research Publication : Ashok K Ray, DK Das, B Venkataraman, PK Roy, B Goswami, Nilima Roy, SK Das, N Parida, S Tarafder, S Chaudhuri, SK Sahay, RN Ghosh, "Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners", Materials Science and Engineering: A Volume 405 Issue 1-2 Pages 194-200, 2005

Publisher : Elsevier

Year : 2005

Characterisation and erosion behaviour of a plasma sprayed Ni3Al coating on a Fe-based superalloy

Cite this Research Publication : SB Mishra, K Chandra, S Prakash, B Venkataraman. "Characterisation and erosion behaviour of a plasma sprayed Ni3Al coating on a Fe-based superalloy", Materials Letters Volume 59 Issue 28 Pages 3694-3698, 2005

Publisher : North-Holland

Year : 2004

STUDY ON THE ENHANCED FRACTURE TOUGHNESS OBSERVED IN ALUMINA-13 WT% TITANIA AS PLASMA SPRAYED COATINGS

Cite this Research Publication : R Venkataraman, R Krishnamurthy, DK Dasz, B Venkataraman, "STUDY ON THE ENHANCED FRACTURE TOUGHNESS OBSERVED IN ALUMINA-13 WT% TITANIA AS PLASMA SPRAYED COATINGS", Transactions of the Indian Institute of Metals Volume 57 Issue 5, 2004

Year : 2004

Damage resistance of thermal barrier coated superalloy in combustion chamber liner

Cite this Research Publication : AK Ray, S Tarafder, DK Das, B Venkatraman, PK Roy, B Goswami, YN Tiwari, S Palit Sagar, VR Ranganath, Goutam Das, S Chaudhuri, RN Ghosh, "Damage resistance of thermal barrier coated superalloy in combustion chamber liner", Journal of Metallurgy and Materials Science Volume 46 Issue 4 Pages 205-212, 2004

Publisher : CSIR-NML Jamshedpur

Year : 2004

Evaluation of Tribological Coatings

Cite this Research Publication : B Venkataraman, "Evaluation of Tribological Coatings", Proc. of DAE-BRNS Workshop on Plasma Surface Engineering, BARC, Mumbai Pages 217-235, 2004

Year : 2004

Effect of impinging velocity on the erosive wear behaviour of polyamides

Cite this Research Publication : J John Rajesh, J Bijwe, B Venkataraman, US Tewari, "Effect of impinging velocity on the erosive wear behaviour of polyamides", Tribology International Volume 37 Issue 3 Pages 219-226, 2004

Publisher : Elsevier

Year : 2003

Three-body abrasive wear behaviour of polyaryletherketone composites

Cite this Research Publication : AP Harsha, US Tewari, B Venkatraman, "Three-body abrasive wear behaviour of polyaryletherketone composites", Wear Volume 254 Issue 7-8 Pages 680-692, 2003

Publisher : Elsevier

Year : 2002

The influence of sample geometry on the friction behaviour of carbon–carbon composites

Cite this Research Publication : B Venkataraman, G Sundararajan, "The influence of sample geometry on the friction behaviour of carbon–carbon composites", Acta materialia Volume 50 Issue 5 Pages 1153-1163, 2002

Publisher : Pergamon

Year : 2002

Effect of water absorption on erosive wear behaviour of polyamides

Cite this Research Publication : J John Rajesh, J Bijwe, B Venkataraman, US Tewari, "Effect of water absorption on erosive wear behaviour of polyamides", Journal of materials science Volume 37 Issue 23 Pages 5107-5113, 2002

Publisher : Springer Netherlands

Year : 2001

Erosive wear bahavious of various polyamides

Cite this Research Publication : J John Rajesh, Jayashree Bijwe, US Tewari, B Venkataraman, "Erosive wear bahavious of various polyamides", 2001

Year : 2001

Erosive wear behavior of various polyamides

Cite this Research Publication : J John Rajesh, Jayashree Bijwe, US Tewari, B Venkataraman, "Erosive wear behavior of various polyamides", wear Volume 249 Issue 8 Pages 702-714, 2001

Publisher : Elsevier

Year : 2001

Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes

Cite this Research Publication : JKN Murthy, DS Rao, B Venkataraman, "Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes", Wear Volume 249 Issue 7 Pages 592-600, 2001

Publisher : Elsevier

Year : 2000

Harris, SJ, 10

Cite this Research Publication : Q Hu, S Bahadur, SK Biswas, FV Delamare, C Drummond, L Esposito, TE Fischer, S Fouvry, FJ Franklin, Y Golan, C Grossiord, J Igarashi, J Israelachvili, G Jintang, A Kapoor, Ph Kapsa, K Kato, H Kim, T Le Mogne, XY Li, B Mills, P Montmitonnet, NK Myshkin, L Ponsonnet, HS Qi, WM Rainforth, NX Randall, DA Rigney, B Rizoulieres, E Sauger, DS Shin, KN Tandon, R Tenne, A Tucci, B Venkataraman, L Vincent, RB Waterhouse, S Wilson, J Xu, Z Zhu, "Harris, SJ, 10", Wear Volume 245 Pages 232, 2000

Year : 2000

Metal matrix composites as potential armour materials

Cite this Research Publication : BBV Radhakrishna, K Somaraju, B Venkataraman, VV Bhanuprasad, "Metal matrix composites as potential armour materials

Year : 2000

Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs

Cite this Research Publication : B Venkataraman, G Sundararajan, "Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs", Wear Volume 245 Issue 1-2 Pages 22-38, 2000

Publisher : Elsevier

Year : 1999

Evaluation of the abradable performance of clearance control coatings

Cite this Research Publication : B Venkataraman, JKN Murthy, Ch V Subba Rao, "Evaluation of the abradable performance of clearance control coatings", Thirteenth International Conference on Surface Modification Technologies Pages 145-150, 1999

Year : 1998

Metal matrix composites as potential armour materials

Cite this Research Publication : BV Radhakrishna Bhat, K Somaraju, B Venkataraman, VV Bhanuprasad, "Metal matrix composites as potential armour materials", 103-115, 1998

Publisher : NML, Jamshedpur, India

Year : 1997

A comparison of tribological and bulk mechanical properties of boronised and nitrided steel

Cite this Research Publication : G Sundararajan, B Venkataraman, K Lakshminarayana, GBK Harish, "A comparison of tribological and bulk mechanical properties of boronised and nitrided steel", Surface Modification Technologies X Pages 852-862, 1997

Year : 1996

The sliding wear behaviour of Al-SiC particulate composites—I. Macrobehaviour

Cite this Research Publication : B Venkatraman, G Sundararajan, "The sliding wear behaviour of Al-SiC particulate composites—I. Macrobehaviour", Acta Materialia Volume 44 Issue 2 Pages 451-460, 1996

Year : 1996

The sliding wear behaviour of Al SiC particulate composites—II. The characterization of subsurface deformation and correlation with wear behaviour

Cite this Research Publication : B Venkataraman, G Sundararajan, "The sliding wear behaviour of Al SiC particulate composites—II. The characterization of subsurface deformation and correlation with wear behaviour", Acta Materialia Volume 44 Issue 2 Pages 461-473, 1996

Publisher : Pergamon

Year : 1996

The sliding wear behaviour of Al SiC particulate composites—I. Macrobehaviour

Cite this Research Publication : B Venkataraman, G Sundararajan, "The sliding wear behaviour of Al SiC particulate composites—I. Macrobehaviour", Acta Materialia Volume 44 Issue 2 Pages 451-460, 1996

Publisher : Pergamon

Year : 1995

ELSEVIER Surface and Coatings Technology 73 (1995) 201

Cite this Research Publication : GAJ Amaratunga, H Ando, T Arai, FG Arieta, T Asami, K Bewilogua, P Bielifiski, RN Bolster, JO Carlsson, LH Chiu, JG Duh, CHS Dupuy, RK Dwivedi, A Eltoukhy, A Erdemir, C Fan, GR Fenske, E Fredriksson, DT Gawne, J Heberlein, WY Ho, D Hofmann, S Hotta, JL Huang, PC Huang, H Htibsch, Y Itou, CL Jiaa, K Kanda, A Kapoor, H Kappl, I Yu Konyashin, M Lebrun, SC Lee, J Lemke, FL Li, Y Lian, CJ Lin, G Male, A Matthews, EI Meletis, WL Pao, E Pfender, DL Piron, VS Raja, R Rajendran, C Rebholz, B Rother, VK Sarin, K Saruki, JM Schneider, H Schuessler, LE Seitzman, BY Shew, F Shimakura, K Sikorski, SRP Silva, IL Singer, R Sivakumar, RS Srinivasa, P Stevenson, M Sugawara, JS Sun, G Sundararajan, S Takano, S Takehana, XN Tang, E Teng, RK Thareja, B Venkataraman, AA Voevodin, KJ Wahl, A Wang, H Wang, JH Wang, JY Wang, R Watanabe, T Wierzchofi, JK Wu, P Wu, Q Xue, CF Yang, S Yoshida, CZ Zhou, "ELSEVIER Surface and Coatings Technology 73 (1995) 201", Surface and Coatings Technology Volume 73 Pages 201, 1995

Year : 1995

The high speed sliding wear behaviour of boronized medium carbon steel

Cite this Research Publication : B Venkataraman, G Sundararajan, "The high speed sliding wear behaviour of boronized medium carbon steel", Surface and Coatings Technology Volume 73 Issue 3 Pages 177-184, 1995

Publisher : Elsevier

Year : 1993

The effect of laser surface melting on the erosion behaviour of a low alloy steel

Cite this Research Publication : DRK Rao, B Venkataraman, MK Asundi, G Sundararajan, "The effect of laser surface melting on the erosion behaviour of a low alloy steel", Surface and Coatings Technology Volume 58 Issue 2 Pages 85-92, 1993

Publisher : Elsevier

Year : 1992

The erosion behaviour of an aluminium-lithium alloy

Cite this Research Publication : DRK Rao, B Venkataraman, MK Asundi, Govindan Sundararajan, "The erosion behaviour of an aluminium-lithium alloy", Scripta metallurgica et materialia Volume 27 Issue 7 Pages 937-942, 1992

Publisher : Pergamon

Year : 1992

The effect of participate reinforcement on the sliding wear behavior of aluminum matrix composites

Cite this Research Publication : Manish Roy, B Venkataraman, VV Bhanuprasad, YR Mahajan, G Sundararajan, "The effect of participate reinforcement on the sliding wear behavior of aluminum matrix composites", Metallurgical and Materials Transactions A Volume 23 Issue 10, 1992

Publisher : Springer Boston

Year : 1990

The nature of the elastic rebound of a hard ball impacting on ductile, metallic target materials

Cite this Research Publication : Y Tirupataiah, B Venkataraman, G Sundararajan, "The nature of the elastic rebound of a hard ball impacting on ductile, metallic target materials", The nature of the elastic rebound of a hard ball impacting on ductile, metallic target materials

Publisher : Elsevier

Year : 1990

Erosion efficiency-a new parameter to characterize the dominant erosion micromechanism

Cite this Research Publication : G Sundararajan, Manish Roy, B Venkataraman, "Erosion efficiency-a new parameter to characterize the dominant erosion micromechanism", Wear Volume 140 Issue 2 Pages 369-381, 1990

Publisher : Elsevier

Year : 1987

The effect of matrix constraint on intergranular cavity growth mechanism maps

Cite this Research Publication : B Venkataraman, G Sundararajan, "The effect of matrix constraint on intergranular cavity growth mechanism maps, Materials Science and Engineering Volume 92 Pages 113-126, 1987

Publisher : Elsevier

Conference Paper

Year : 2006

Fretting Wear Behavior of Plasma Sprayed Cu-Ni-In Coating and Cu-Ni-In+ MoS2 Composite Coatings

Cite this Research Publication : SN Paul, NS More, JKN Murthy, M Roy, B Venkataraman, "Fretting Wear Behavior of Plasma Sprayed Cu-Ni-In Coating and Cu-Ni-In+ MoS2 Composite Coatings", ITSC2006 Pages 1351-1356, 2006

Publisher : ASM International

Year : 2004

Solid Particle Erosion Behavior of Laser Surface Modified Al-12Si alloy

Cite this Research Publication : Dr. B. Venkataraman , "Solid Particle Erosion Behavior of Laser Surface Modified Al-12Si alloy", Proceedings of the International Convention on Surface Engineering (INCOSURF-2004) Pages 333-340, 2004

Year : 2004

Evaluation of microstructural and dry sliding wear characteristics of pulsed Nd: YAG laser surface melted Al-Si alloys

Cite this Research Publication : SS Reddy, JKS Sundar, B Venkataraman, SV Joshi, "Evaluation of microstructural and dry sliding wear characteristics of pulsed Nd: YAG laser surface melted Al-Si alloys", International Conference on Advances in Surface Treatment: Research and Applications, ASTRA; Hyderabad; India; 3 November 2003 through 6 November 2003; Code 67247 Pages 568-574, 2004

Year : 2003

Enhancement of wear resistance of Al-Si alloys by Laser Surface Engineering

Cite this Research Publication : S Sudhakara Reddy B.Venkataraman,S.M.Shariff, S.V.Joshi, "Enhancement of wear resistance of Al-Si alloys by Laser Surface Engineering", Proceedings of the International Conference on Advances in Surface Treatment : Research & Applications (ASTRA) Pages 255-264, 2003

Publisher : Society for Advancement of Heat Treatment and Surface Engineering (SAHSTE)

Year : 2003

Evaluation of Micro structural and Dry Sliding Wear Characteristics of Pulsed Nd:YAG Laser surface melted Al-Si alloys

Cite this Research Publication : S Sudhakara Reddy B.Venkataraman, J.K.Sarin Sundar,S.V.Joshi, "Evaluation of Micro structural and Dry Sliding Wear Characteristics of Pulsed Nd:YAG Laser surface melted Al-Si alloys", Proceedings of the International Conference on Advances in surface Treatment: Research & Applications(SMT XVII & IFHTSE),3rd to 6th November,2003 Pages 568-574, 2003

Publisher : Society for Advancement of Heat Treatment and Surface Engineering (SAHTSE)

Year : 2002

SLIDING FRICTION AND WEAR BEHAVIOUR OF ALUMINIUM SLIDING AGAINST ITSELF

Cite this Research Publication : K.L.Narayana S.Sudhakara Reddy,B.Venkataraman, "SLIDING FRICTION AND WEAR BEHAVIOUR OF ALUMINIUM SLIDING AGAINST ITSELF", National Conference on Advances in Manufacturing, 2002

Book

Year : 2002

Online monitoring of zirconium alloy components of pressurised heavy water reactors by advanced NDE techniques

Cite this Research Publication : Raj Baldev, P Kalyanasundaram, B Venkataraman, "Online monitoring of zirconium alloy components of pressurised heavy water reactors by advanced NDE techniques", Proceedings of the symposium Zirconium-2002

Year : 1989

An Analysis of the Effect of Environmental Damage on the Creep Fracture of Inconel Alloy X–750

Cite this Research Publication : B VENKATARAMAN, G SUNDARARAJAN, "An Analysis of the Effect of Environmental Damage on the Creep Fracture of Inconel Alloy X–750", Proceedings of The 7th International Conference On Fracture (ICF7) Pages 1851-1858, 1989

Publisher : Pergamon

Experience
  • Amrita Vishwa Vidyapeetham – from Jul 2022 – Present
  • Former Scientist at Defence Metallurgical Research Laboratory
    35+yrs.Experience
    Hyderabad, Telangana, India
Skill
  • Materials Science
  • Coatings Technology
  • Tribology
  • Dynamic behaviour of Materials
  • High Temperature Materials
  • Plasma Applications
  • Design Research
  • Research
  • Teaching
  • Data Analysis
  • Higher Education
  • Public Speaking
Admissions Apply Now