Year : 2022
Enhancement of microstructure and mechanical performance of spray formed Al-6Si-18Pb Alloy by warm rolling.
Cite this Research Publication : Reddy BVR, Patnaik L, Maity SR, Kumar S and KM. “Enhancement of microstructure and mechanical performance of spray formed Al-6Si-18Pb Alloy by warm rolling.” Advances in Materials and Processing Technologies- Taylor & Francis (2022).
Publisher : Taylor & Francis
Year : 2022
Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. “Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films.” Silicon (2022), 1-18.
Publisher : Silicon
Year : 2022
Relative effect of wear parameter on wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Relative effect of wear parameter on wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method.” Advances in Materials and Processing Technologies- Taylor & Francis (2022).
Publisher : Taylor & Francis
Year : 2022
Morphology and wear behavior of monolayer TiAlN and composite AlCrN/TiAlN coated plasma nitrided DAC-10 tool steel
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Morphology and wear behavior of monolayer TiAlN and composite AlCrN/TiAlN coated plasma nitrided DAC-10 tool steel.” Arabian Journal for Science and Engineering (2022): 1-20.
Publisher : Arabian Journal for Science and Engineering
Year : 2022
Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach.
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach.” International Journal on Interactive Design and Manufacturing- Springer. (Accepted)
Publisher : Springer
Year : 2022
A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating”, Journal of Industrial and Management Optimization- American Institute of Mathematical Sciences (2022)
Publisher : Journal of Industrial and Management Optimization- American Institute of Mathematical Sciences
Year : 2021
Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pairs via Response Surface Methodology
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. “Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pairs via Response Surface Methodology.” Advances in Materials and Processing Technologies- Taylor & Francis (2021).
Publisher : Taylor & Francis
Year : 2021
Scratch Resistance and Adhesive Energy of AlCrN and Ag doped a-C Films Deposited on Chrome Nitrided 316 LVM Stainless Steel.
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. “Scratch Resistance and Adhesive Energy of AlCrN and Ag doped a-C Films Deposited on Chrome Nitrided 316 LVM Stainless Steel.” Advances in Materials and Processing Technologies- Taylor & Francis (2021)
Publisher : Taylor & Francis
Year : 2021
Mechanical and Tribological Assessment of Composite AlCrN or a-C: Ag-based Thin Films for Implant Applications.
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. "Mechanical and Tribological Assessment of Composite AlCrN or a-C: Ag-based Thin Films for Implant Applications." Ceramics International (2021), 47 (5), 6736-6752.
Publisher : Ceramics International
Year : 2021
Modeling of wear parameters and multi-criteria optimization by box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V Counterbody.
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. "Modeling of wear parameters and multi-criteria optimization by box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V Counterbody." Ceramics International 47, no.14 (2021): 20494-20511
Publisher : Ceramics International
Year : 2021
Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. "Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film." Journal of the Mechanical Behavior of Biomedical Materials 118 (2021): 104478.
Publisher : Journal of the Mechanical Behavior of Biomedical Materials
Year : 2021
Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. “Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film.” Materials Chemistry and Physics (2021):124980.
Publisher : Materials Chemistry and Physics
Year : 2021
Effect of tribological process parameter on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. "Effect of tribological process parameter on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study." Ceramics International 47, no. 11 (2021): 16018-16028.
Publisher : Ceramics International
Year : 2021
Effect of Annealing on Structural, Mechanical and Tribological Properties of Cr-(CrN/TiAlN) coating
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Effect of Annealing on Structural, Mechanical and Tribological Properties of Cr-(CrN/TiAlN) coating.” Advances in Materials and Processing Technologies- Taylor & Francis (2021)
Publisher : Taylor & Francis
Year : 2021
Mechanical and Scratch Behavior of TiAlN Coated and 3D Printed H13 Tool Steel
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Mechanical and Scratch Behavior of TiAlN Coated and 3D Printed H13 Tool Steel.” Advances in Materials and Processing Technologies- Taylor & Francis (2021)
Publisher : Taylor & Francis
Year : 2021
Wear assessment of Cr2O3/TiAlN coated DAC-10 tool steel against steel and Al2O3 counterbodies
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. “Wear assessment of Cr2O3/TiAlN coated DAC-10 tool steel against steel and Al2O3 counterbodies.” International Journal of Applied Ceramic Technology-Wiley
Publisher : International Journal of Applied Ceramic Technology-Wiley
Year : 2020
Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application
Cite this Research Publication : Patnaik L, Maity SR, and Kumar S. "Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application." Ceramics International (2020), 46 (14), 22805-22818.
Publisher : Ceramics International
Year : 2020
Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel
Cite this Research Publication : Kumar S, Maity SR, and Patnaik L. "Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel." Ceramics International (2020), 46 (11), 17280-17294.
Publisher : Ceramics International
Year : 2017
Design and Analysis of Seven Stage Progressive Tool for Automobile Engine Starter Key
Cite this Research Publication : Kumar S and Patnaik L. "Design and Analysis of Seven Stage Progressive Tool for Automobile Engine Starter Key." CVR Journal of Science and Technology 12 (2017): 48-52
Publisher : CVR Journal of Science and Technology
Year : 2017
Design and Analysis of Four Stage Progressive Tool for House-wiring Wire Clip
Cite this Research Publication : Kumar S and Patnaik L. "Design and Analysis of Four Stage Progressive Tool for House-wiring Wire Clip." CVR Journal of Science and Technology 13 (2017): 88-95.
Publisher : Journal of Science and Technology
Year : 2016
Analysis and Design of Plastic Mold for Male Insulator of Solar Connector using Plastic Advisor 7.0
Cite this Research Publication : Patnaik L and Kumar S. "Analysis and Design of Plastic Mold for Male Insulator of Solar Connector using Plastic Advisor 7.0." CVR Journal of Science and Technology 11 (2016): 51-56
Publisher : CVR Journal of Science and Technology