Year : 2024
Microstructure and wear behaviour of AlCoCrFeNi-coated SS316L by atmospheric plasma spray process
Cite this Research Publication : Noble, N., Radhika, N., & Natarajan, J. (2024). Microstructure and wear behaviour of AlCoCrFeNi-coated SS316L by atmospheric plasma spray process. Science and Technology of Advanced Materials, 25(1). https://doi.org/10.1080/14686996.2024.2341611
Year : 2024
Investigation on the Microstructure and Micro-Mechanical Properties of Thermal-Sprayed NiCoCrAlY High Entropy Alloy Coating
Cite this Research Publication : Basak, A.K.; Radhika, N.; Prakash, C.; Pramanik, A. Investigation on the Microstructure and Micro-Mechanical Properties of Thermal-Sprayed NiCoCrAlY High Entropy Alloy Coating. Designs 2024, 8, 37. https://doi.org/10.3390/designs8020037
Year : 2024
Advancements and future prospects of additive manufacturing in high-entropy alloy applications
Cite this Research Publication : S. Ragunath, N. Radhika, Bassiouny Saleh, "Advancements and future prospects of additive manufacturing in high-entropy alloy applications", Journal of Alloys and Compounds, Volume 997, 2024, 174859, ISSN 0925-8388
Year : 2024
Advances in Vacuum Arc Melting for High Entropy Alloys: A Review
Cite this Research Publication : S. Arun, N. Radhika, Bassiouny Saleh, "Advances in vacuum arc melting for high entropy alloys: A review" Vacuum, Volume 226, 2024, 113314, ISSN 0042-207X
Year : 2024
Wear and corrosion resistance of Al2O3 and TiC deposition on steel substrate using Self- propagating High temperature Synthesis method
Cite this Research Publication : U.V. Akhil a, N. Radhika a*, N. Jeyaprakash b, T. Ramkumar c, "Wear and corrosion resistance of Al2O3 and TiC deposition on steel substrate using Self- propagating High temperature Synthesis method", 2024 Phys. Scr. 99 0659c6
Year : 2024
Optimization of WEDM parameters for machining Mg-Li-RE alloy using CRITIC-COCOSO approach
Cite this Research Publication : Kavimani, V., Gopal, P., Sumesh, K. et al. Optimization of WEDM parameters for machining Mg-Li-RE alloy using CRITIC-COCOSO approach. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-01913-z
Year : 2023, 2024
A review on welding techniques: properties, characterisations and engineering applications
Cite this Research Publication : C, S., Radhika, N., Deepak Kumar, N. H., & Sivasailam, B. (2023). A review on welding techniques: properties, characterisations and engineering applications. Advances in Materials and Processing Technologies, 1–56. https://doi.org/10.1080/2374068X.2023.2186638
Publisher : Taylor and Francis Ltd.
Year : 2024
Synthesis of High Entropy Alloy for Surface Modification by Friction Stir Process: Recent Advances and Future Directions
Cite this Research Publication : Ragunath, S., Radhika, N., Aravind Krishna, S. et al. Synthesis of High Entropy Alloy for Surface Modification by Friction Stir Process: Recent Advances and Future Directions. Met. Mater. Int. 30, 1170–1199 (2024). https://doi.org/10.1007/s12540-023-01584-7
Publisher : Korean Institute of Metals and Materials
Year : 2024
Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V
Cite this Research Publication : N. Jeyaprakash, M. Saravana Kumar, Che-Hua Yang, Yan-hai Cheng, S. Sivasankaran, N. Radhika, Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V, Materials Characterization, Volume 207, 2024, 113592, ISSN 1044-5803
Publisher : Elsevier Inc.
Year : 2024
A study on microstructural, mechanical properties and optimization of wear behavior of friction stir processed AlCrCoFeNi High Entropy Alloy reinforced SS410 using response surface methodology
Cite this Research Publication : S. Ragunath, N. Radhika, S. Aravind Krishna, L. Rajeshkumar, A study on microstructural, mechanical properties and optimization of wear behavior of friction stir processed AlCrCoFeNi High Entropy Alloy reinforced SS410 using response surface methodology, Heliyon, Volume 10, Issue 2, 2024, e24429, ISSN 2405-8440
Publisher : Elsevier Ltd
Year : 2024
Effect of yttrium oxide on microstructure and mechanical properties of functionally graded magnesium matrix composites
Cite this Research Publication : Bassiouny Saleh, Reham Fathi, N. Radhika, Zhiwei Yu, Shenguang Liu, Lu Zhang, Effect of yttrium oxide on microstructure and mechanical properties of functionally graded magnesium matrix composites, Journal of Alloys and Compounds, Volume 981, 2024, 173723, ISSN 0925-8388
Publisher : Elsevier Ltd
Year : 2024
Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying
Cite this Research Publication : Noble, N., Radhika, N., Sathishkumar, M., & Basak, A. K. (2024). Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying. Transactions of the IMF, 102(3), 161–168. https://doi.org/10.1080/00202967.2023.2291907
Publisher : Taylor and Francis Ltd.
Year : 2024
A comprehensive review on advances in high entropy alloys: Fabrication and surface modification methods, properties, applications, and future prospects
Cite this Research Publication : S. Aravind Krishna, Niveditha Noble, N. Radhika, Bassiouny Saleh, A comprehensive review on advances in high entropy alloys: Fabrication and surface modification methods, properties, applications, and future prospects,Journal of Manufacturing Processes, Volume 109, 2024, Pages 583-606, ISSN 1526-6125
Publisher : Elsevier Ltd
Year : 2024
Effect of graphene on the tribological behavior of Ti6Al6V2Sn/Gn composite produced via microwave sintering
Cite this Research Publication : Akhil U.V.; Radhika N.; Ramkumar T.; Pramanik A., "Effect of graphene on the tribological behavior of Ti6Al6V2Sn/Gn composite produced via microwave sintering", International Journal of Lightweight Materials and Manufacture Volume 7, Issue 1, January 2024, Pages 1-13
Publisher : KeAi Publishing Communications Ltd.
Year : 2024
Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications
Cite this Research Publication : R. Bharathiraja, T. Ramkumar, M. Selvakumar, N. Radhika, Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications,Renewable Energy, Volume 222, 2024, 119986, ISSN 0960-1481
Publisher : Elsevier Ltd
Year : 2024
Electrochemical and hot corrosion behaviour of annealed AlCoCrFeNi HEA coating over steel
Cite this Research Publication : Radhika, N., Noble, N. & Adediran, A.A. Electrochemical and hot corrosion behaviour of annealed AlCoCrFeNi HEA coating over steel. Sci Rep 14, 5652 (2024). https://doi.org/10.1038/s41598-024-55962-1
Publisher : Nature Research
Year : 2024
Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts
Cite this Research Publication :
N. Jeyaprakash, M. Saravana Kumar, Che-Hua Yang, Yanhai Cheng, N. Radhika, S. Sivasankaran,
Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts, Journal of Alloys and Compounds, Volume 972, 2024, 172745, ISSN 0925-8388
Publisher : Elsevier Ltd
Year : 2024
Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing
Cite this Research Publication : Radhika, N., Krishna, S.A., Basak, A.K. et al. Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing. Sci Rep 14, 3662 (2024). https://doi.org/10.1038/s41598-024-54267-7
Publisher : Nature Research
Year : 2024
Electrochemical and hot corrosion analysis of novel AlBeSiTiV light weight HEA coating on SS316
Cite this Research Publication : S N, Kishan & Rajendran, Anoosa & U V, Akhil & Radhika, N.. (2024). Electrochemical and Hot Corrosion analysis of Novel AlBeSiTiV Light Weight HEA Coating on SS316. Physica Scripta. 99. 10.1088/1402-4896/ad1f18.
Publisher : Institute of Physics
Year : 2024
Microstructural Evolution and Anti-Corrosion Characteristics of As-Cast and LPBF Printed Inconel Plates in Seawater Environment
Cite this Research Publication : Jeyaprakash N.; Yang C.-H.; Karuppasamy S.S.; Radhika N., "Microstructural Evolution and Anti-Corrosion Characteristics of As-Cast and LPBF Printed Inconel Plates in Seawater Environment", Surface Review and Letters, Volume 31, Issue 4, id. 2450032, 2024
Publisher : World Scientific
Year : 2024
Electrochemical and hot corrosion behaviour of steel reinforced with AlSiBeTiV high entropy alloy using friction stir processing
Cite this Research Publication : Sundaram, R., Nachimuthu, R., Sivanandam, A. K., & Natarajan, J. (2024). Electrochemical and hot corrosion behaviour of steel reinforced with AlSiBeTiV high entropy alloy using friction stir processing. Science and Technology of Advanced Materials, 25(1). https://doi.org/10.1080/14686996.2024.2320083
Publisher : Taylor and Francis Ltd.
Year : 2023
Characterisation and property evaluation of High Entropy Alloy coating on 316L steel via thermal spray synthesis
Cite this Research Publication : Niveditha Noble, N. Radhika, M. Sathishkumar, Bassiouny Saleh,, Characterisation and property evaluation of High Entropy Alloy coating on 316L steel via thermal spray synthesis, Tribology International, Volume 185, 2023, 108525, ISSN 0301-679X
Publisher : Elsevier Ltd
Year : 2023, 2024
A review on welding techniques: properties, characterisations and engineering applications
Cite this Research Publication : C, S., Radhika, N., Deepak Kumar, N. H., & Sivasailam, B. (2023). A review on welding techniques: properties, characterisations and engineering applications. Advances in Materials and Processing Technologies, 1–56. https://doi.org/10.1080/2374068X.2023.2186638
Publisher : Taylor and Francis Ltd.
Year : 2023
Review on biolubricants and nanoparticles as additives in machining process
Cite this Research Publication : S. Aswin Nanda, N. Radhika, T. Mohanraj, V. Vignesh, K. R. Ratana Selvan, B. Jayaraman; Review on biolubricants and nanoparticles as additives in machining process. AIP Conf. Proc. 24 July 2023; 2788 (1): 060002. https://doi.org/10.1063/5.0149244
Publisher : American Institute of Physics Inc.
Year : 2023
Optimizing reciprocal wear responses of centrifugally cast A333 hybrid functionally graded composite using Taguchi and response surface methodology
Cite this Research Publication : Sam, M., Radhika, N., Ramu, M. et al. Optimizing reciprocal wear responses of centrifugally cast A333 hybrid functionally graded composite using Taguchi and response surface methodology. Int J Interact Des Manuf 17, 1323–1338 (2023). https://doi.org/10.1007/s12008-022-01125-3
Publisher : Springer-Verlag Italia s.r.l.
Year : 2023
Challenges associated with drilling of carbon fiber reinforced polymer (CFRP) composites-A review
Cite this Research Publication : Goh Kai Ze, A. Pramanik, A.K. Basak, C. Prakash, S. Shankar, N. Radhika,"Challenges associated with drilling of carbon fiber reinforced polymer (CFRP) composites-A review", Composites Part C: Open Access, Volume 11, 2023, 100356, ISSN 2666-6820
Publisher : Elsevier B.V.
Year : 2023
Duplex and Composite Coatings: A Thematic Review on Thermal Spray Techniques and Applications
Cite this Research Publication : Sathish, M., Radhika, N. & Saleh, B. Duplex and Composite Coatings: A Thematic Review on Thermal Spray Techniques and Applications. Met. Mater. Int. 29, 1229–1297 (2023). https://doi.org/10.1007/s12540-022-01302-9
Publisher : Korean Institute of Metals and Materials
Year : 2023
Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends
Cite this Research Publication : Saleh, B., Fathi, R., Tian, Y. et al. Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends. Archiv.Civ.Mech.Eng 23, 96 (2023). https://doi.org/10.1007/s43452-023-00633-7
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2023
Possibilities, performance and challenges of nitinol alloy fabricated by Directed Energy Deposition and Powder Bed Fusion for biomedical implants
Cite this Research Publication : M. Sathishkumar, Challa Praneeth Kumar, Sannepalli Shanmukh Sagar Ganesh, Mohith Venkatesh, N. Radhika, M. Vignesh, Ashwath Pazhani, "Possibilities, performance and challenges of nitinol alloy fabricated by Directed Energy Deposition and Powder Bed Fusion for biomedical implants",Journal of Manufacturing Processes, Volume 102, 2023, Pages 885-909, ISSN 1526-6125
Publisher : Elsevier Ltd
Year : 2023
Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future
Cite this Research Publication : Radhika, N., Sam, M., Sathishkumar, M., Kavimani, V., & Pramanik, A. (2023). Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future. Advances in Materials and Processing Technologies, 1–24. https://doi.org/10.1080/2374068X.2023.2216397
Publisher : Taylor and Francis Ltd.
Year : 2023
Effects of Abrasive Waterjet Machining on the Quality of the Surface Generated on a Carbon Fibre Reinforced Polymer Composite
Cite this Research Publication : Rowe, A.; Pramanik, A.; Basak, A.K.; Prakash, C.; Subramaniam, S.; Dixit, A.R.; Radhika, N. Effects of Abrasive Waterjet Machining on the Quality of the Surface Generated on a Carbon Fibre Reinforced Polymer Composite. Machines 2023, 11, 749. https://doi.org/10.3390/machines11070749
Publisher : Multidisciplinary Digital Publishing Institute (MDPI)
Year : 2023
Microstructural mechanical and corrosion properties of SS304/HEA surface layer produced by Friction Stir Processing
Cite this Research Publication : S. Aravind Krishna, N. Radhika, Bassiouny Saleh, S. Manivannan,"Microstructural mechanical and corrosion properties of SS304/HEA surface layer produced by Friction Stir Processing", Journal of Alloys and Compounds, Volume 953, 2023, 170153, ISSN 0925-8388
Publisher : Elsevier Ltd
Year : 2023
A review on shape memory alloys and their prominence in automotive technology
Cite this Research Publication : Shreekrishna S, Nachimuthu R, Nair VS. A review on shape memory alloys and their prominence in automotive technology. Journal of Intelligent Material Systems and Structures. 2023;34(5):499-524. doi:10.1177/1045389X221111547
Publisher : SAGE Publications Ltd
Year : 2023
Improving reciprocal tribo-mechanical performance and corrosion resistance using carbide ceramics: T6 thermal-treated A333 mono-hybrid functionally graded composites
Cite this Research Publication : M. Sam, N. Radhika, B. Saleh,"Improving reciprocal tribo-mechanical performance and corrosion resistance using carbide ceramics: T6 thermal-treated A333 mono-hybrid functionally graded composites",Materials Today Chemistry, Volume 29, 2023, 101479, ISSN 2468-5194
Publisher : Elsevier Ltd
Year : 2023
A comprehensive review on underwater welding: methods, property evaluations and challenges
Cite this Research Publication : Vijay, A., & Radhika, N. (2023). A comprehensive review on underwater welding: methods, property evaluations and challenges. Advances in Materials and Processing Technologies, 1–37. https://doi.org/10.1080/2374068X.2023.2184582
Publisher : Taylor and Francis Ltd.
Year : 2023
Current Status, Challenges, and Future Prospects of Thin Film Coating Techniques and Coating Structures
Cite this Research Publication : Sathish, M., Radhika, N. & Saleh, B. Current Status, Challenges, and Future Prospects of Thin Film Coating Techniques and Coating Structures. J Bio Tribo Corros 9, 35 (2023). https://doi.org/10.1007/s40735-023-00754-9
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2023
A Comprehensive Review on Various Ceramic Nanomaterial Coatings Over Metallic Substrates: Applications, Challenges and Future Trends
Cite this Research Publication : Arun, K.L., Udhayakumar, M. & Radhika, N. A Comprehensive Review on Various Ceramic Nanomaterial Coatings Over Metallic Substrates: Applications, Challenges and Future Trends. J Bio Tribo Corros 9, 11 (2023). https://doi.org/10.1007/s40735-022-00717-6
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2023
A Comprehensive Review on Ceramic Coating on Steel and Centrifugal Thermite Process: Applications and Future Trends
Cite this Research Publication : Akhil, U.V., Radhika, N., Rajeshkumar, L. et al. A Comprehensive Review on Ceramic Coating on Steel and Centrifugal Thermite Process: Applications and Future Trends. J Bio Tribo Corros 9, 41 (2023). https://doi.org/10.1007/s40735-023-00765-6
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2023
Enhancing microstructural, mechanical and tribological behaviour of AlSiBeTiV high entropy alloy reinforced SS410 through friction stir processing
Cite this Research Publication : S. Ragunath, N. Radhika, S. Aravind Krishna, N. Jeyaprakash,"Enhancing microstructural, mechanical and tribological behaviour of AlSiBeTiV high entropy alloy reinforced SS410 through friction stir processing", Tribology International, Volume 188, 2023, 108840, ISSN 0301-679X
Publisher : Elsevier Ltd
Year : 2023
Effect of Nano-Additives on Tribological Behaviour of Hazelnut Oil and Sunflower Oil
Cite this Research Publication : Noble, Niveditha & U V, Akhil & Krishna, Aravind & Radhika, N. & Murugan, Ramu. (2023). Effect of Nano-Additives on Tribological Behaviour of Hazelnut Oil and Sunflower Oil. Tribology in Industry. 45. 457-471. 10.24874/ti.1464.03.23.05.
Publisher : Faculty of Engineering, University of Kragujevac
Year : 2023
Recent Progress In Aluminum Hybrid Composites Reinforced With Natural Fiber Ash: A Review
Cite this Research Publication : Radhika N.; Sam M.; Sidvilash V., "Recent Progress In Aluminum Hybrid Composites Reinforced With Natural Fiber Ash: A Review", Surface Review and Letters Volume 30, Issue 2, 1 February 2023, Article number 2330002
Publisher : World Scientific
Year : 2023
Optimized mechanical properties of magnesium matrix composites using RSM and ANN
Cite this Research Publication : Bassiouny Saleh, Aibin Ma, Reham Fathi, N. Radhika, Guangheng Yang, Jinghua Jiang, "Optimized mechanical properties of magnesium matrix composites using RSM and ANN", Materials Science and Engineering: B, Volume 290, 2023, 116303, ISSN 0921-5107
Publisher : Elsevier Ltd
Year : 2023
Effect of Bioceramic Reinforcement on Mechanical and Machinability Behaviour of AZ31 Magnesium Alloy Composites
Cite this Research Publication : Saravanakumar, A., Sreenivas, P., Vijayakumar, S. et al. Effect of Bioceramic Reinforcement on Mechanical and Machinability Behaviour of AZ31 Magnesium Alloy Composites. JOM 75, 5394–5404 (2023). https://doi.org/10.1007/s11837-023-06145-2
Publisher : Springer
Year : 2023
A comprehensive review on polymer matrix composites: material selection, fabrication, and application
Cite this Research Publication : Kangishwar, S., Radhika, N., Sheik, A.A. et al. A comprehensive review on polymer matrix composites: material selection, fabrication, and application. Polym. Bull. 80, 47–87 (2023). https://doi.org/10.1007/s00289-022-04087-4
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2023
A comprehensive review on plant-based natural fiber reinforced polymer composites: Fabrication, properties, and applications
Cite this Research Publication : U. V. Akhil, N. Radhika, B. Saleh, S. Aravind Krishna, N. Noble, L. Rajeshkumar, "A comprehensive review on plant-based natural fiber reinforced polymer composites: Fabrication, properties, and applications", Polym. Compos. 2023, 44(5), 2598. https://doi.org/10.1002/pc.27274
Publisher : John Wiley and Sons Inc
Year : 2023
Mechanism Correlating Microstructure and Wear Behaviour of Ti-6Al-4V Plate Produced Using Selective Laser Melting
Cite this Research Publication : Jeyaprakash, N.; Yang, C.-H.; Prabu, G.; Radhika, N. Mechanism Correlating Microstructure and Wear Behaviour of Ti-6Al-4V Plate Produced Using Selective Laser Melting. Metals 2023, 13, 575. https://doi.org/10.3390/met13030575
Publisher : MDPI
Year : 2023
Mechanical property analysis and tribological response optimization of SiC and MoS2 reinforced hybrid aluminum functionally graded composite through Taguchi’s DOE
Cite this Research Publication : Sidharthan, S. & Raajavignesh, G. & Nandeeshwaran, R. & Radhika, N. & Radhakrishnan, Jojith & Jeyaprakash, N.. (2023). Mechanical property analysis and tribological response optimization of SiC and MoS2 reinforced hybrid aluminum functionally graded composite through Taguchi's DOE. Journal of Manufacturing Processes. 102. 965-984. 10.1016/j.jmapro.2023.08.013.
Publisher : Elsevier Ltd
Year : 2023
Analysis on the transformation of melt wear to self-healing crack of wire arc additive manufactured Al 5356 alloy
Cite this Research Publication : G. Prabu, N. Jeyaprakash, Che-Hua Yang, N. Radhika, Analysis on the transformation of melt wear to self-healing crack of wire arc additive manufactured Al 5356 alloy,Tribology International, Volume 188, 2023, 108802, ISSN 0301-679X
Publisher : Elsevier Ltd
Year : 2023
Optimization and Characterization of Centrifugal-Cast Functionally Graded Al-SiC Composite Using Response Surface Methodology and Grey Relational Analysis
Cite this Research Publication : Saleh, B.; Fathi, R.; Abdalla, M.A.A.; Radhika, N.; Ma, A.; Jiang, J. Optimization and Characterization of Centrifugal-Cast Functionally Graded Al-SiC Composite Using Response Surface Methodology and Grey Relational Analysis. Coatings 2023, 13, 813. https://doi.org/10.3390/coatings13050813
Publisher : MDPI
Year : 2022
Progression in manufacturing of functionally graded materials and impact of thermal treatment—A critical review
Cite this Research Publication : Manu Sam, R. Jojith, N. Radhika, "Progression in manufacturing of functionally graded materials and impact of thermal treatment—A critical review", Journal of Manufacturing Processes, Volume 68, Part A, 2021, Pages 1339-1377, ISSN 1526-6125
Publisher : Elsevier Ltd
Year : 2022
A Review on Si-Based Ceramic Matrix Composites and their Infiltration Based Techniques
Cite this Research Publication : Radhika, N., Sathish, M. A Review on Si-Based Ceramic Matrix Composites and their Infiltration Based Techniques. Silicon 14, 10141–10171 (2022). https://doi.org/10.1007/s12633-022-01763-y
Publisher : Springer Science and Business Media B.V.
Year : 2022
A Comprehensive Review on Nanocrystalline Coatings: Properties, Challenges and Applications
Cite this Research Publication : Udhayakumar, M., Radhika, N. & Arun, K.L. A Comprehensive Review on Nanocrystalline Coatings: Properties, Challenges and Applications. J Bio Tribo Corros 8, 83 (2022). https://doi.org/10.1007/s40735-022-00683-z
Publisher : Springer Science and Business Media Deutschland GmbH
Year : 2022
A comprehensive review of vapour deposited coatings for cutting tools: properties and recent advances
Cite this Research Publication : Ariharan, N., Sriram, C. G., Radhika, N., Aswin, S., & Haridas, S. (2022). A comprehensive review of vapour deposited coatings for cutting tools: properties and recent advances. Transactions of the IMF, 100(5), 262–275. https://doi.org/10.1080/00202967.2022.2037343
Publisher : Taylor and Francis Ltd.
Year : 2022
Past and present of functionally graded coatings: Advancements and future challenges
Cite this Research Publication : Reham Fathi, Hongyu Wei, Bassiouny Saleh, N. Radhika, Jinghua Jiang, Aibin Ma, Mahmoud H. Ahmed, Qin Li, Kostya Ken Ostrikov, "Past and present of functionally graded coatings: Advancements and future challenges", Applied Materials Today, Volume 26, 2022, 101373, ISSN 2352-9407
Publisher : Elsevier Ltd
Year : 2022
Wear characteristics of functionally graded composites synthesized from magnesium chips waste
Cite this Research Publication : Bassiouny Saleh, Aibin Ma, Reham Fathi, N. Radhika, Bohai Ji, Jinghua Jiang, "Wear characteristics of functionally graded composites synthesized from magnesium chips waste", Tribology International, Volume 174, 2022, 107692, ISSN 0301-679X
Publisher : Elsevier Ltd
Year : 2022
Influence of carbide ceramic reinforcements in improving tribological properties of A333 graded hybrid composites
Cite this Research Publication : Manu Sam, N. Radhika, "Influence of carbide ceramic reinforcements in improving tribological properties of A333 graded hybrid composites", Defence Technology, Volume 18, Issue 7, 2022, Pages 1107-1123, ISSN 2214-9147
Publisher : China Ordnance Industry Corporation
Year : 2022
Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering
Cite this Research Publication : K.R. Ramkumar, N. Radhika, S. Sivasankaran, Hyoung Seop Kim, "Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering", Journal of Alloys and Compounds, Volume 899, 2022, 163319, ISSN 0925-8388
Publisher : Elsevier Ltd
Year : 2022
Metallographic, mechanical and reciprocating wear characterization and behavioural studies of untreated and T6 treated Al2O3/Al7Si0.3Mg functional composite material
Cite this Research Publication : Jojith R., Radhika N., Bassiouny Saleh, "Metallographic, mechanical and reciprocating wear characterization and behavioural studies of untreated and T6 treated Al2O3/Al7Si0.3Mg functional composite material", Tribology International, Volume 174, 2022, 107693, ISSN 0301-679X
Publisher : Elsevier Ltd
Year : 2022
Microstructure, mechanical properties and reciprocal dry sliding wear behaviour of as-cast and heat-treated TiN/Al-7Si functionally graded composite
Cite this Research Publication : Radhakrishnan J, Nachimuthu R. Microstructure, mechanical properties and reciprocal dry sliding wear behaviour of as-cast and heat-treated TiN/Al-7Si functionally graded composite. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2022;236(10):1317-1331. doi:10.1177/09544054221075879
Publisher : SAGE Publications Ltd
Year : 2022
Recent advances in tribological behavior of functionally graded composites: A review
Cite this Research Publication : R. Jojith, Manu Sam, N. Radhika, "Recent advances in tribological behavior of functionally graded composites: A review", Engineering Science and Technology, an International Journal, Volume 25, 2022, 100999, ISSN 2215-0986
Publisher : Elsevier B.V.
Year : 2022
The role of NiTi shape memory alloys in quality of life improvement through medical advancements: A comprehensive review
Cite this Research Publication : Nair VS, Nachimuthu R. The role of NiTi shape memory alloys in quality of life improvement through medical advancements: A comprehensive review. Proc Inst Mech Eng H. 2022 Jul;236(7):923-950. doi: 10.1177/09544119221093460. Epub 2022 Apr 29. PMID: 35486134.
Publisher : SAGE Publications Ltd
Year : 2022
Influence of boride, oxide, and carbide ceramics as secondary reinforcement in T6-A333 functionally graded hybrid composites
Cite this Research Publication : Manu Sam, Radhika N, Bassiouny Saleh,"Influence of boride, oxide, and carbide ceramics as secondary reinforcement in T6-A333 functionally graded hybrid composites", Ceramics International, Volume 48, Issue 19, Part A, 2022, Pages 28528-28547, ISSN 0272-8842
Publisher : Elsevier Ltd
Year : 2022
Tribological and mechanical characterization of as-cast and thermal treated Al-9Si/SiC graded composite
Cite this Research Publication : Nachimuthu R, Sam M, Thangamayandi AR, Balasubramanian Gayathri YK, Ranganathan LK. Tribological and mechanical characterization of as-cast and thermal treated Al-9Si/SiC graded composite. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2022;236(14):8092-8107. doi:10.1177/09544062221084189
Publisher : SAGE Publications Ltd
Year : 2022
Reciprocating Wear Behavioural Analysis of Heat-treated Aluminium ZrO2/Al7Si0.3Mg Functionally Graded Composite Through Taguchi’s Optimization Method
Cite this Research Publication : Jojith, R., Radhika, N. & Govindaraju, M. Reciprocating Wear Behavioural Analysis of Heat-treated Aluminium ZrO2/Al7Si0.3Mg Functionally Graded Composite Through Taguchi’s Optimization Method. Silicon 14, 11337–11354 (2022). https://doi.org/10.1007/s12633-022-01862-w
Publisher : Springer Science and Business Media B.V.
Year : 2022
Comparative study on machining performance of TiAlSiN, AlTiN/TiAlSiN-coated cutting tools
Cite this Research Publication : Sriram, C. G., Ariharan, N., & Radhika, N. (2022). Comparative study on machining performance of TiAlSiN, AlTiN/TiAlSiN-coated cutting tools. Transactions of the IMF, 101(2), 79–86. https://doi.org/10.1080/00202967.2022.2095113
Publisher : Taylor and Francis Ltd.
Year : 2022
Recent advances and challenges associated with thin film coatings of cutting tools: a critical review
Cite this Research Publication : Aditharajan, A., Radhika, N., & Saleh, B. (2022). Recent advances and challenges associated with thin film coatings of cutting tools: a critical review. Transactions of the IMF, 101(4), 205–221. https://doi.org/10.1080/00202967.2022.2082154
Publisher : Taylor and Francis Ltd.
Year : 2022
Investigation on the mechanical and wear behaviour of Al-6082-BN-B4C-corn cob ash hybrid composites
Cite this Research Publication : Manu, S., Radhika, N., Sidvilash, V. and Mohanraj, T., 2022. Investigation on the mechanical and wear behaviour of Al-6082-BN-B4C-corn cob ash hybrid composites. Tribology in Industry, 44(2), p.294.
Year : 2021
A review on machining and tribological behaviors of aluminium hybrid composites
Cite this Research Publication : Ganesan Pandi, Saravanan Muthusamy, "A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites", Procedia Engineering, Volume 38, 2012, Pages 1399-1408, ISSN 1877-7058
Publisher : Elsevier Ltd
Year : 2021
Statistical Analysis of Tribological Performance of Functionally Graded Copper Composite Using DOE
Cite this Research Publication : R. N. and M. Sam, “Statistical Analysis of Tribological Performance of Functionally Graded Copper Composite Using DOE”, Int. J. Automot. Mech. Eng., vol. 18, no. 3, pp. 8978–8985, Sep. 2021.
Publisher : Universiti Malaysia Pahang
Year : 2021
Statistical analysis of process parameters in drilling of SS410 stainless steel
Cite this Research Publication : V. Vignesh, S. Ilangovan, N. Radhika, "Statistical analysis of process parameters in drilling of SS410 stainless steel", Materials Today: Proceedings, Volume 46, Part 9, 2021, Pages 3313-3319, ISSN 2214-7853
Publisher : Elsevier Ltd
Year : 2021
Reciprocal dry sliding wear of SiCp/Al–7Si-0.3 Mg functionally graded composites: Influence of T6 treatment and process parameters
Cite this Research Publication : R. Jojith, N. Radhika, "Reciprocal dry sliding wear of SiCp/Al–7Si-0.3 Mg functionally graded composites: Influence of T6 treatment and process parameters", Ceramics International, Volume 47, Issue 21, 2021, Pages 30459-30470, ISSN 0272-8842
Publisher : Elsevier Ltd
Year : 2021
A critical review on functionally graded coatings: Methods, properties, and challenges
Cite this Research Publication : M. Sathish, N. Radhika, Bassiouny Saleh, "A critical review on functionally graded coatings: Methods, properties, and challenges," Composites Part B: Engineering, Volume 225, 2021, 109278, ISSN 1359-8368
Publisher : Elsevier Ltd
Year : 2021
Influence of spheroidised eutectic silicon on tribo-mechanical behaviour of centrifugally cast functionally graded aluminium composite
Cite this Research Publication : Radhika, N., Jojith, R., & Pravinsankar, S. R. (2021). Influence of spheroidised eutectic silicon on tribo-mechanical behaviour of centrifugally cast functionally graded aluminium composite. Canadian Metallurgical Quarterly, 60(4), 265–280. https://doi.org/10.1080/00084433.2021.2014723
Publisher : Taylor and Francis Ltd.
Year : 2021
Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing
Cite this Research Publication : Suganeswaran, K., Parameshwaran, R., Mohanraj, T. and Radhika, N., 2021. Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(1), pp.161-178.
Year : 2021
Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite
Cite this Research Publication : Radhika N, Sasikumar J, Jojith R, “Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite”, Silicon, Doi: 10.1007/s12633-020-00476-4, May 2020, IF:1.499.
Publisher : Silicon
Year : 2021
Characterization and Property Analysis of Heat-treated Functionally Graded Al8Si3Cu Alloy and TiC reinforced Composite
Cite this Research Publication : R. Jojith, Akhil, R. C., and Dr. Radhika N, “Characterization and Property Analysis of Heat-treated Functionally Graded Al8Si3Cu Alloy and TiC reinforced Composite”, vol. 74, no. 2, pp. 459 - 471, 2021.
Publisher : Volume 74, Issue 2,
Year : 2020
Investigation of Mechanical and Tribological Behaviour of Heat-Treated Functionally Graded Al-7Si/B4C Composite
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Investigation of Mechanical and Tribological Behaviour of Heat-Treated Functionally Graded Al-7Si/B4C Composite”, Silicon, vol. 12, no. 9, pp. 2073 - 2085, 2020.
Publisher : Silicon
Year : 2020
Wear and Friction Study of Centrifugally Cast Functionally Graded Cu-Ni-Si Alloy and Composite.
Cite this Research Publication :
S. Manu and Dr. Radhika N, “Wear and Friction Study of Centrifugally Cast Functionally Graded Cu-Ni-Si Alloy and Composite.”, Tribology in Industry, vol. 42, no. 2, 2020.
Publisher : Tribology in Industry
Year : 2020
Taguchi’s technique in optimization of process parameters on Wear behaviour ofCu/Si3N4Metal Matrix Composite
Cite this Research Publication :
V. Jayan, Nithinraj,, and Dr. Radhika N, “Taguchi’s technique in optimization of process parameters on Wear behaviour ofCu/Si3N4Metal Matrix Composite”, Materials Today: Proceedings, vol. 24, pp. 1052-1063, 2020.
Publisher : Materials Today: Proceedings,
Year : 2020
Analysis of Adhesive Wear Behaviour of Cu-10Sn-4Si Composite Reinforced with SiC particles Using Optimization Technique
Cite this Research Publication :
A. V. Ankit, R. Kumar, K., and Dr. Radhika N, “Analysis of Adhesive Wear Behaviour of Cu-10Sn-4Si Composite Reinforced with SiC particles Using Optimization Technique”, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018, 16th -18th August, 2018, India, vol. 24, pp. 815 - 824, 2020.
Publisher : International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018,
Year : 2020
Characterization and Wear Behaviour of WC-Co Coated Copper under Dry Sliding Conditions at Varying Hardness
Cite this Research Publication :
J. Radhakrishnan, Dr. Radhika N, and Raj, R., “Characterization and Wear Behaviour of WC-Co Coated Copper under Dry Sliding Conditions at Varying Hardness”, vol. 42, pp. 327 - 336, 2020.
Publisher : Volume 42
Year : 2020
Optimization of Cutting Parameters for MRR, Tool Wear and Surface Roughness Characteristics in Machining ADC12 Piston Alloy Using DOE.
Cite this Research Publication :
H. D. Kumar, Ilangovan, S., and Dr. Radhika N, “Optimization of Cutting Parameters for MRR, Tool Wear and Surface Roughness Characteristics in Machining ADC12 Piston Alloy Using DOE.”, Tribology in Industry, vol. 42, no. 1, 2020.
Publisher : Tribology in Industry,
Year : 2020
Studies on Adhesive Wear Characteristics of Centrifugally Cast Functionally Graded Ceramic Reinforced Composite
Cite this Research Publication :
K. K Sriram, Dr. Radhika N, Sam, M., and Srihari S., “Studies on Adhesive Wear Characteristics of Centrifugally Cast Functionally Graded Ceramic Reinforced Composite”, International Journal of Automotive and Mechanical Engineering, vol. 17, no. 4, pp. 8274–8282, 2020.
Publisher : International Journal of Automotive and Mechanical Engineering
Year : 2020
Enhancing the Mechanical and Reciprocating Wear Behavior of Functionally Graded A359 Aluminium Alloy Through Heat Treatment.
Cite this Research Publication : Dr. Radhika N, Jojith, R., Thiagarajan, N. S., and Ruthraprakash, M., “Enhancing the Mechanical and Reciprocating Wear Behavior of Functionally Graded A359 Aluminium Alloy Through Heat Treatment.”, Tribology in Industry, vol. 42, no. 3, pp. 513-527, 2020.
Publisher : Tribology in Industry,j
Year : 2020
Effect of ni-coated reinforcement on mechanical and tribological properties of heat treated aluminium composite
Cite this Research Publication :
S. Prabhu, Prasad, P. H. Durga, and Dr. Radhika N, “Effect of Ni-Coated Reinforcement on Mechanical and Tribological Properties of Heat Treated Aluminium Composite”, Tribology in Industry, vol. 42, no. 3, pp. 468-480, 2020.
Publisher : Tribology in Industry
Year : 2020
Investigation of Mechanical and Tribological Behaviour of Heat-Treated Functionally Graded Al-7Si/B4C Composite
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Investigation of Mechanical and Tribological Behaviour of Heat-Treated Functionally Graded Al-7Si/B4C Composite”, Silicon, vol. 12, no. 9, pp. 2073 - 2085, 2020.
Publisher : Silicon
Year : 2020
Comparative Study on Reciprocal Tribology Performance of Mono-Hybrid Ceramic Reinforced Al-9Si-3Cu Graded Composites
Cite this Research Publication :
M. Sam and Dr. Radhika N, “Comparative study on reciprocal tribology performance of mono-hybrid ceramic reinforced Al-9Si-3Cu graded composites”, Silicon, pp. 1–12, 2020.
Publisher : Silicon, Springer
Year : 2020
Comparative Study of Microstructure, Mechanical and Reciprocating Wear Properties of Unmodified and Sr-Modified A383 Alloy and Composite
Cite this Research Publication :
P. Hari Durga Prasad and Dr. Radhika N, “Comparative Study of Microstructure, Mechanical and Reciprocating Wear Properties of Unmodified and Sr-Modified A383 Alloy and Composite”, vol. 73, no. 7, pp. 1939 - 1950, 2020.
Publisher : Volume 73, Issue 7,
Year : 2020
Microstructural, mechanical and tribological analysis of functionally graded copper composite
Cite this Research Publication : Radhika N., Sam M., “Microstructural, mechanical and tribological analysis of functionally graded copper composite”, International Journal of Cast Metals Research, Vo.33, Issue.3, pp.123-133, Doi: 10.1080/13640461.2020.1769318, May 2020.
Publisher : International Journal of Cast Metals Research
Year : 2020
Effect of heat treatment on mechanical and tribological properties of aluminum metal matrix composites
Cite this Research Publication :
M. Sam, Dr. Radhika N, and Sai, K. Pavan, “Effect of heat treatment on mechanical and tribological properties of aluminum metal matrix composites”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 234, no. 22, pp. 4493–4504, 2020.
Publisher : Proceedings of the Institution of Mechanical Engineers
Year : 2020
Dry reciprocating wear and frictional behaviour of B4C reinforced functionally graded and homogenous aluminium matrix composites
Cite this Research Publication :
Dr. Radhika N, Sasikumar, J., Sylesh, J. L., and Kishore, R., “Dry reciprocating wear and frictional behaviour of B4C reinforced functionally graded and homogenous aluminium matrix composites”, Journal of Materials Research and Technology, vol. 9, no. 2, pp. 1578–1592, 2020.
Publisher : Journal of Materials Research and Technology
Year : 2020
Optimization of cutting parameters for mrr, tool wear and surface roughness characteristics in machining adc12 piston alloy using doe
Cite this Research Publication : Kumar H.D, Ilangovan S, Radhika N, “Optimization of cutting parameters for mrr, tool wear and surface roughness characteristics in machining adc12 piston alloy using doe”, Tribology in Industry, Vol.42, Issue.1, pp-32-40, Doi: 10.24874/ti.2020.42.01.03, March 2020.
Publisher : Tribology in Industry
Year : 2020
Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior
Cite this Research Publication :
Dr. Radhika N, Rajpurohit, P., and Diwakar, A., “Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior”, Particulate Science and Technology, vol. 38, no. 2, pp. 184–192, 2020.
Publisher : Particulate Science and Technology
Year : 2020
Tribo-Mechanical Behaviour of Ti-Based Particulate Reinforced As-Cast and Heat Treated A359 Composites
Cite this Research Publication :
Dr. Radhika N, Sasikumar, J., and Arulmozhivarman, J., “Tribo-mechanical behaviour of Ti-based particulate reinforced As-cast and heat treated A359 composites”, Silicon, vol. 12, no. 11, pp. 2769-2782, 2020.
Publisher : Silicon, Springer,
Year : 2019
Effect of bio cutting fluids on surface roughness during end milling of A359 aluminium alloy
Cite this Research Publication :
J. A. Mozhi, Mohanraj,, and Dr. Radhika N, “Effect of bio cutting fluids on surface roughness during end milling of A359 aluminium alloy”, International Journal of Mechanical and Production Engineering Research and Development, vol. 9, no. 2, pp. 987–996, 2019.
Publisher : International Journal of Mechanical and Production Engineering Research and Development,
Year : 2019
Investigation on mechanical properties and wear behaviour of chopped carbon-basalt epoxy hybrid composite
Cite this Research Publication :
A. R. Chandran and Dr. Radhika N, “Investigation on mechanical properties and wear behaviour of chopped carbon-basalt epoxy hybrid composite”, Materials Research Express, vol. 6, p. 105303, 2019.
Publisher : Materials Research Express, IOP Publishing
Year : 2019
Heat-Treatment Studies on Mechanical and Reciprocating Wear behaviour of Functionally Graded A356 Alloy
Cite this Research Publication :
R. .Jojith and Dr. Radhika N, “Heat-Treatment Studies on Mechanical and Reciprocating Wear behaviour of Functionally Graded A356 Alloy”, Materials Research Express, vol. 6, no. 11, p. 1165C2, 2019.
Publisher : Materials Research Express,
Year : 2019
Development and Properties of Si3N4 Reinforced Functionally Graded Copper Matrix Composite by Centrifugal Casting Technique
Cite this Research Publication : Dr. Radhika N, S .Thirumalini, and .Jojith, R., “Development and Properties of Si3N4 Reinforced Functionally Graded Copper Matrix Composite by Centrifugal Casting Technique”, Silicon , vol. 11, no. 4, pp. 2103-2116, 2019.
Publisher : Silicon ,
Year : 2019
Friction and sliding wear studies on functionally graded Al LM25/WC composite
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Friction and sliding wear studies on functionally graded Al LM25/WC composite”, IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018), vol. 577, 2019.
Publisher : IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018), IOP Publishing
Year : 2019
Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique.
Cite this Research Publication :
C. Aravind, Gopalakrishnan, S., and Dr. Radhika N, “Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique.”, Tribology in Industry, vol. 41, no. 4, 2019.
Publisher : Tribology in Industry,
Year : 2019
Tribological and wear performance of centrifuge cast functional graded copper based composite at dry sliding conditions
Cite this Research Publication :
Dr. Radhika N and Sam, M., “Tribological and wear performance of centrifuge cast functional graded copper based composite at dry sliding conditions”, vol. 26, no. 11, pp. 2961 - 2973, 2019.
Publisher : Volume 26, Issue 11,
Year : 2019
Experimental Studies on Mechanical and Wear Behaviour of TiC Reinforced Cu-Sn-Ni Functionally Graded Composite
Cite this Research Publication : Dr. Radhika N, Sam, M., and Dr. Thirumalini S., “Experimental Studies on Mechanical and Wear Behaviour of TiC Reinforced Cu-Sn-Ni Functionally Graded Composite”, Tribology in Industry, vol. 41, pp. 537-547, 2019.
Publisher : Tribology in Industry
Year : 2019
The effect of bio-cutting fluids on surface roughness during end milling of A359 aluminium alloy
Cite this Research Publication :
A. J., ,, T. Mohanraj, and , “The effect of bio-cutting fluids on surface roughness during end milling of A359 aluminium alloy”, International Journal of Mechanical and Production Engineering Research and Development, vol. 9, pp. 987-996, 2019.
Publisher : nternational Journal of Mechanical and Production Engineering Research and Development
Year : 2019
Abrasive wear behavior of monolithic alloy, homogeneous and functionally graded aluminum (LM25/AlN and LM25/SiO2) composites
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Abrasive wear behavior of monolithic alloy, homogeneous and functionally graded aluminum (LM25/AlN and LM25/SiO2) composites”, Particulate Science and Technology : An International Journal, vol. 37, no. 1, pp. 10-20, 2019.
Publisher : Particulate Science and Technology : An International Journal
Year : 2019
Tribological Characteristics of LM13/Si3N4/Gr Hybrid Composite at Elevated Temperature
Cite this Research Publication :
Nithin Raj and Dr. Radhika N, “Tribological Characteristics of LM13/Si3N4/Gr Hybrid Composite at Elevated Temperature”, Silicon, vol. 11, no. 2, pp. 947–960, 2019.
Publisher : Silicon, Springer Netherlands,
Year : 2019
Studies on Mechanical and Abrasive Wear Properties of Cu-Ni-Si/Si3N4 Functionally Graded Composite
Cite this Research Publication :
Dr. Radhika N and Jefferson, J. A., “Studies on Mechanical and Abrasive Wear Properties of Cu-Ni-Si/Si3N4 Functionally Graded Composite”, Silicon, vol. 11, no. 2, pp. 627–641, 2019.
Publisher : Silicon, Springer Netherlands,
Year : 2019
Mechanical and Wear Properties of Functionally Graded Cu-11Ni-4Si/ Graphite Composite
Cite this Research Publication :
A. R. Kumar, R. Kumar, K., and Dr. Radhika N, “Mechanical and Wear Properties of Functionally Graded Cu-11Ni-4Si/ Graphite Composite”, Silicon, vol. 11, no. 6, pp. 2613-2624, 2019.
Publisher : Silicon, Springer Netherlands,
Year : 2019
Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting”, Particulate Science and Technology, vol. 37, no. 5, pp. 566-578, 2019.
Publisher : Particulate Science and Technology, Taylor and Francis Inc
Year : 2019
Fabrication of light-weight Al LM13/TiS2 metal matrix composites and investigation of its wear characteristics
Cite this Research Publication :
J. Chandra C, Dr. Radhika N, Khushal A. Bhatija, and Saalai Thenagan R, “Fabrication of light-weight Al LM13/TiS2 metal matrix composites and investigation of its wear characteristics”, Particulate Science and Technology, vol. 37, no. 4, pp. 456-463, 2019.
Publisher : Particulate Science and Technology, Taylor & Franci
Year : 2019
Synthesis of Aluminium Composites Using Squeeze Casting and Investigating the Effect of Reinforcements on Their Mechanical and Wear Properties
Cite this Research Publication :
K. R. Kumar, Dr. Radhika N, and Sam, M., “Synthesis of Aluminium Composites Using Squeeze Casting and Investigating the Effect of Reinforcements on Their Mechanical and Wear Properties”, Transactions of the Indian Institute of Metals, vol. 72, no. 9, pp. 2299-2310, 2019.
Publisher : Transactions of the Indian Institute of Metals
Year : 2019
Sliding Wear Studies on Heat-Treated Functionally Graded Cu–Ni–Si/TiC Composite
Cite this Research Publication :
R. Jojith, Dr. Radhika N, and Vipin, U., “Sliding Wear Studies on Heat-Treated Functionally Graded Cu–Ni–Si/TiC Composite”, vol. 72, no. 3, pp. 719 - 731, 2019.
Publisher : Volume 72, Issue 3
Year : 2019
Mechanical and tribological analysis of functionally graded aluminium hybrid composite using RSM approach
Cite this Research Publication :
M. Sam and Dr. Radhika N, “Mechanical and tribological analysis of functionally graded aluminium hybrid composite using RSM approach”, Materials Research Express, vol. 6, 2019.
Publisher : Materials Research Express, Institute of Physics Publishing,
Year : 2019
Investigations on the Tribological Properties of Heat-Treated Copper Composite Using Hybrid Quadratic–Radial Basis Function Model
Cite this Research Publication :
A. R. Kumar, K. Sai, P., Vaira Vignesh R., and Dr. Radhika N, “Investigations on the Tribological Properties of Heat-Treated Copper Composite Using Hybrid Quadratic–Radial Basis Function Model”, Transactions of the Indian Institute of Metals, vol. 72, no. 12, pp. 3117-3128, 2019.
Publisher : Transactions of the Indian Institute of Metals
Year : 2019
Enhancement of tribological properties of pure copper through cold sprayed MoS2 coating
Cite this Research Publication :
R. Jojith, Dr. Radhika N, and Vighneshwar, R., “Enhancement of tribological properties of pure copper through cold sprayed MoS2 coating”, Materials Research Express, vol. 6, 2019.
Publisher : Materials Research Express, Institute of Physics Publishing,
Year : 2019
Enhancement of tribological performance of centrifuge cast functionally graded Cu-10Sn-5Ni alloy with ceramic reinforcements
Cite this Research Publication :
Dr. Radhika N and Sam, M., “Enhancement of tribological performance of centrifuge cast functionally graded Cu-10Sn-5Ni alloy with ceramic reinforcements”, Journal of Materials Research and Technology, vol. 8, pp. 3415-3423, 2019.
Publisher : Journal of Materials Research and Technology
Year : 2019
Enhancement of mechanical and sliding wear properties of functionally graded Al-12Si-Cu composites
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Enhancement of mechanical and sliding wear properties of functionally graded Al-12Si-Cu composites”, Materials Research Express, vol. 6, 2019.
Publisher : Materials Research Express, Institute of Physics Publishing,
Year : 2019
Development and Properties of Centrifugally Cast Silicon Nitride Reinforced Functionally Graded Copper Matrix Composite
Cite this Research Publication : Dr. Radhika N, Dr. Thirumalini S., and Jojith, R., “Development and Properties of Centrifugally Cast Silicon Nitride Reinforced Functionally Graded Copper Matrix Composite”, vol. 11, no. 4, pp. 2103 - 2116, 2019.
Publisher : Volume 11, Issue 4, p.2103 - 2116 (2019)
Year : 2019
Comparative study between tribological performance of carbide reinforced functionally graded copper composite and its alloy under the influence of process parameters
Cite this Research Publication :
Dr. Radhika N and Sam, M., “Comparative study between tribological performance of carbide reinforced functionally graded copper composite and its alloy under the influence of process parameters”, Materials Research Express, vol. 6, 2019.[Abstract]
Publisher : Materials Research Express
Year : 2019
Characterization of centrifuge cast TiC reinforced functional grade composite of copper
Cite this Research Publication :
N. R. Shah, Dr. Radhika N, and Sam, M., “Characterization of centrifuge cast TiC reinforced functional grade composite of copper”, Materials Research Express, vol. 6, 2019.
Publisher : Materials Research Express, Institute of Physics Publishing,
Year : 2019
Improvement of Mechanical and Tribological Properties of Centrifugally Cast Functionally Graded Copper for Bearing Applications
Cite this Research Publication :
Dr. Radhika N, Reghunath, R., and Sam, M., “Improvement of mechanical and tribological properties of centrifugally cast functionally graded copper for bearing applications”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 233, no. 9, pp. 3208-3219, 2019.
Publisher : Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications Ltd
Year : 2019
Synthesis of Cu-10Sn/SiC Metal Matrix Composites and Experimental Investigation of its Adhesive Wear Behaviour
Cite this Research Publication :
Dr. Radhika N, Karthik, R., Gowtham, S., and Ramkumar, S., “Synthesis of Cu-10Sn/SiC Metal Matrix Composites and Experimental Investigation of its Adhesive Wear Behaviour”, Silicon, vol. 11, no. 1, pp. 345-354, 2019.
Publisher : Silicon, Springer Netherlands,
Year : 2018
Influence of parameters on sliding wear of titanium nitride coated 6061 aluminium alloy
Cite this Research Publication : Radhika, N. & Raghu, R.. (2018). Influence of Parameters on Sliding Wear of Titanium Nitride Coated 6061 Aluminium Alloy. Tribology in Industry. 40. 203-212. 10.24874/ti.2018.40.02.04.
Publisher : Faculty of Engineering, University of Kragujevac
Year : 2018
Optimization of the milling parameters for an Al/Si3N4 functionally graded composite using grey relational analysis
Cite this Research Publication :
A. Venkatachalam, Anurag, P. Venkata Sa, Sadanand, T. Dhuruvan, and Dr. Radhika N, “Optimization of the milling parameters for an Al/Si3N4 functionally graded composite using grey relational analysis”, Materials Testing, vol. 60, no. 2, pp. 215–221, 2018.
Publisher : Materials Testing, De Gruyter,
Year : 2018
Effect of process parameters in abrasive wear behaviour of LM13/TiS2 MMC
Cite this Research Publication :
N. Raj, Dr. Radhika N, Rao, B. Subba, and Kumar, L. Prasanna, “Effect of process parameters in abrasive wear behaviour of LM13/TiS2 MMC”, International Journal of Materials Engineering Innovation, vol. 9, no. 4, pp. 307–321, 2018.
Publisher : International Journal of Materials Engineering Innovation, Inderscience Publishers (IEL)
Year : 2016, 2018
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Cite this Research Publication : Dr. Radhika N, “Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites”, Science and Engineering of Composite Materials, 2016.
Publisher : Science and Engineering of Composite Materials.
Year : 2018
Synthesis of Al LM25/TiC Composite Using Squeeze Casting Method and Investigation of its Mechanical and Adhesive Wear properties
Cite this Research Publication :
C. Magaacibhi Athev, J. Nithin Alistar, and Dr. Radhika N, “Synthesis of Al LM25/TiC Composite Using Squeeze Casting Method and Investigation of its Mechanical and Adhesive Wear properties”, Materials Today: Proceedings, vol. 5, no. 5, Part 2, pp. 12681 - 12692, 2018.
Publisher : Materials Today: Proceedings
Year : 2018
Study on three-body abrasive wear behavior of functionally graded Al/TiB2 composite using response surface methodology
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Study on three-body abrasive wear behavior of functionally graded Al/TiB2 composite using response surface methodology”, Particulate Science and Technology : An International Journal, vol. 36, no. 7, pp. 816-823, 2018.
Publisher : Particulate Science and Technology : An International Journal, Taylor and Francis Inc.
Year : 2018
Serum Albumin as a Predictor of Functional Outcomes Following Acute Ischemic Stroke
Cite this Research Publication : R. Nair, Radhakrishnan, K., Chatterjee, A., Gorthi, S. Prasad, and Prabhu, V. A., “Serum Albumin as a Predictor of Functional Outcomes Following Acute Ischemic Stroke”, J Vasc Interv Neurol, vol. 10, no. 2, pp. 65-68, 2018.
Publisher : J Vasc Interv Neurol .
Year : 2018
Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology”, Particulate Science and Technology: An International Journal, vol. 36, no. 1, pp. 104-111, 2018.
Publisher : Particulate Science and Technology: An International Journal
Year : 2018
Multi-response optimisation of machining parameters in electrical discharge machining of Al LM25/AlB2 functionally graded composite using grey relation analysis
Cite this Research Publication :
Dr. Radhika N, Punnath, N., and Katamreddy, S. Charan, “Multi-response optimisation of machining parameters in electrical discharge machining of Al LM25/AlB2 functionally graded composite using grey relation analysis”, International Journal of Machining and Machinability of Materials, vol. 20, no. 3, pp. 193-213, 2018.
Publisher : International Journal of Machining and Machinability of Materials
Year : 2018
Investigation on Mechanical and Adhesive Wear Behavior of Centrifugally Cast Functionally Graded Copper/SiC Metal Matrix Composite
Cite this Research Publication : Dr. Radhika N, Dr. Thirumalini S., and Shivashankar, A., “Investigation on Mechanical and Adhesive Wear Behavior of Centrifugally Cast Functionally Graded Copper/SiC Metal Matrix Composite”, Transactions of the Indian Institute of Metals, vol. 71, no. 6, pp. 1311-1322, 2018.
Publisher : Transactions of the Indian Institute of Metals
Year : 2018
Investigation of three body abrasive wear behaviour of centrifugally cast Cu-Sn/SiC functionally graded composite using Design of Experiment Approach
Cite this Research Publication :
S. Sasidharan, Rahul Puthucode, Dr. Radhika N, and A. Shivashankar, “Investigation of three body abrasive wear behaviour of centrifugally cast Cu-Sn/SiC functionally graded composite using Design of Experiment Approach”, Materials Today: Proceedings, vol. 5, no. 5, Part 2, pp. 12657 - 12665, 2018.
Publisher : Materials Today: Proceedings
Year : 2018
Influence of process parameters on sliding wear of titanium nitride coated 6061 aluminium alloy
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Influence of process parameters on sliding wear of titanium nitride coated 6061 aluminium alloy”, Tribology in Industry, vol. 40, no. 2, pp. 203-212, 2018.
Publisher : Tribology in Industry, Faculty of Engineering, University of Kragujevac,
Year : 2018
Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties
Cite this Research Publication :
R. Jojith and Dr. Radhika N, “Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 6, p. 292, 2018.
Publisher : Journal of the Brazilian Society of Mechanical Sciences and Engineering
Year : 2018
Fabrication of Cu-Sn-Ni /SiC FGM for Automotive Applications: Investigation of its Mechanical and Tribological Properties
Cite this Research Publication :
Dr. Radhika N, Teja, K., Rahul, K., and A, S., “Fabrication of Cu-Sn-Ni /SiC FGM for Automotive Applications: Investigation of its Mechanical and Tribological Properties”, Silicon, vol. 10, no. 4, pp. 1705–1716, 2018.
Publisher : Silicon
Year : 2018
Fabrication of Cu-Sn/SiC Metal Matrix Composites and Investigation of its Mechanical and Dry Sliding Wear Properties
Cite this Research Publication : R. Kumar, S., G., and Dr. Radhika N, “Fabrication of Cu-Sn/SiC Metal Matrix Composites and Investigation of its Mechanical and Dry Sliding Wear Properties”, Materials Today: Proceedings, vol. 5, no. 5, pp. 12757-12771, 2018.
Publisher : Materials Today: Proceedings
Year : 2018
Experimental Studies and Comparison of Centrifugally Cast Cu/SiC and Cu/Si3N4 Functionally Graded Composites on Mechanical and Wear Behavior
Cite this Research Publication :
Dr. Radhika N and J. Andrew Jefferson, “Experimental Studies and Comparison of Centrifugally Cast Cu/SiC and Cu/Si3N4 Functionally Graded Composites on Mechanical and Wear Behavior”, Journal of Tribology, vol. 140, no. 6, p. 061602, 2018.
Publisher : Journal of Tribology
Year : 2018
Experimental Investigation on Adhesive Wear Behavior of Al–Si6Cu/Ni Coated SiC Composite Under Unlubricated Condition
Cite this Research Publication :
Dr. Radhika N, Ramprasad, R., and Nivethan, S., “Experimental Investigation on Adhesive Wear Behavior of Al–Si6Cu/Ni Coated SiC Composite Under Unlubricated Condition”, vol. 71, no. 5, pp. 1073 - 1082, 2018.
Publisher : Volume 71, Issue 5,
Year : 2018
Enhancement of Tribological Properties of Al 6060 by Spray Coated TiO2 Nanoparticle
Cite this Research Publication :
Dr. Radhika N, Manu Sam, B. Ashish Guhan, and Kiran Aravidha, “Enhancement of Tribological Properties of Al 6060 by Spray Coated TiO2 Nanoparticle”, Transactions of the Indian Institute of Metals, vol. 71, no. 8, pp. 1859–1870, 2018.
Publisher : Transactions of the Indian Institute of Metals
Year : 2018
Enhancement of mechanical and wear properties of tungsten carbide coated AA 6063 alloy using detonation gun technique
Cite this Research Publication :
R. Anil Kumar and Dr. Radhika N, “Enhancement of mechanical and wear properties of tungsten carbide coated AA 6063 alloy using detonation gun technique”, Transactions of the IMF, vol. 96, no. 4, pp. 212-219, 2018.
Publisher : Transactions of the IMF
Year : 2018
Effect of Heat Treatment on Mechanical and Tribological Properties of Centrifugally Cast Functionally Graded Cu/Al2O3 Composite
Cite this Research Publication :
Manu Sam and Dr. Radhika N, “Effect of Heat Treatment on Mechanical and Tribological Properties of Centrifugally Cast Functionally Graded Cu/Al2O3 Composite”, Journal of Tribology, vol. 140, no. 2, pp. 1-7, 2018.
Publisher : Journal of Tribology
Year : 2018
Effect of Centrifugal Speed in Abrasive Wear Behavior of Al-Si5Cu3/SiC Functionally Graded Composite Fabricated by Centrifugal Casting
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Effect of Centrifugal Speed in Abrasive Wear Behavior of Al-Si5Cu3/SiC Functionally Graded Composite Fabricated by Centrifugal Casting”, Transactions of the Indian Institute of Metals, vol. 71, no. 3, pp. 715–726, 2018.
Publisher : Transactions of the Indian Institute of Metals
Year : 2018
Development of functionally graded Cu–Sn–Ni/Al2O3 composite for bearing applications and investigation of its mechanical and wear behavior
Cite this Research Publication :
Manu Sam and Dr. Radhika N, “Development of functionally graded Cu–Sn–Ni/Al2O3 composite for bearing applications and investigation of its mechanical and wear behavior”, Particulate Science and Technology, pp. 1-12, 2018.
Publisher : Particulate Science and Technology, Taylor and Francis Inc.
Year : 2018
Comparison of mechanical and wear behavior of Al alloy with homogeneous and functionally graded silicon nitride composites
Cite this Research Publication : Dr. Radhika N, “Comparison of mechanical and wear behavior of Al alloy with homogeneous and functionally graded silicon nitride composites”, Science and Engineering of Composite Materials, vol. 25, no. 2, pp. 261-271, 2018.
Publisher : Science and Engineering of Composite Materials
Year : 2018
Analysis of three body abrasive wear behaviour of centrifugally cast aluminium composite reinforced with ni coated sic using taguchi technique
Cite this Research Publication : Radhika, N.. (2018). Analysis of Three Body Abrasive Wear Behaviour of Centrifugally Cast Aluminium Composite Reinforced with Ni Coated SiC using Taguchi Technique. Tribology in Industry. 40. 81-91. 10.24874/ti.2018.40.01.07.
Publisher : Tribology in Industry
Year : 2018
Analysis of three body abrasive wear behavior of centrifugally cast aluminium composite reinforced with Ni coated SiC using Taguchi technique
Cite this Research Publication :
Dr. Radhika N, “Analysis of three body abrasive wear behavior of centrifugally cast aluminium composite reinforced with Ni coated SiC using Taguchi technique”, Tribology in Industry, vol. 40, no. 1, pp. 81-91(11), 2018.
Publisher : Tribology in Industry
Year : 2017
Synthesis of functionally graded aluminium composite and investigation on its abrasion wear behaviour
Cite this Research Publication : Radhika, N. & Raghu, R.. (2017). Synthesis of functionally graded aluminium composite and investigation on its abrasion wear behaviour. Journal of Engineering Science and Technology. 12. 1386-1398.
Publisher : Taylor's University
Year : 2017
Characterisation of mechanical properties and three body abrasive wear of functionally graded Al LM25/TiC MMCs
Cite this Research Publication : Dr. Radhika N and .Raghu, R., “Characterisation of mechanical properties and three body abrasive wear of functionally graded Al LM25/TiC MMCs”, Materials Science and Engineering Technology, vol. 48, pp. 882–892, 2017.
Publisher : Materials Science and Engineering Technology
Year : 2017
Synthesis of functionally graded aluminium composite and investigation on its abrasion wear behavior
Cite this Research Publication :
Dr. Radhika N and .Raghu, R., “Synthesis of functionally graded aluminium composite and investigation on its abrasion wear behavior”, Journal of Engineering Science and Technology, vol. 12, no. 5, pp. 1386-1398, 2017.
Publisher : Journal of Engineering Science and Technology
Year : 2017
Studies on sliding wear characteristics of aluminium LM25/silicon dioxide functionally graded composite and optimisation of parameters using response surface methodology
Cite this Research Publication :
K. A. Bhatija and Dr. Radhika N, “Studies on sliding wear characteristics of aluminium LM25/silicon dioxide functionally graded composite and optimisation of parameters using response surface methodology ”, Materials Science and Engineering Technology, vol. 48, no. 6, pp. 1-11, 2017.
Publisher : Materials Science and Engineering Technology, Wiley-VCH Verlag
Year : 2017
Studies on Mechanical Behaviour of Aluminium/Nickel Coated Silicon Carbide Reinforced Functionally Graded Composite
Cite this Research Publication :
A. Mohandas and Dr. Radhika N, “Studies on Mechanical Behaviour of Aluminium/Nickel Coated Silicon Carbide Reinforced Functionally Graded Composite”, Tribology in Industry, vol. 39, no. 2, pp. 145-151, 2017.
Publisher : Tribology in Industry
Year : 2017
Optimisation of WEDM process parameters during machining of Cu-Ni-Si/TiC FGM using Taguchi’s method
Cite this Research Publication :
Nithin Raj and Dr. Radhika N, “Optimisation of WEDM process parameters during machining of Cu-Ni-Si/TiC FGM using Taguchi's method”, International Journal of Materials Engineering Innovation, vol. 8, no. 3-4, pp. 282-295, 2017.
Publisher : International Journal of Materials Engineering Innovation
Year : 2017
Mechanical Properties and Adhesive Scuffing Wear Behavior of Stir Cast Cu-Sn-Ni/Si3N4 Composites
Cite this Research Publication :
R. Nithesh, Dr. Radhika N, and S. Shiam Sunder, “Mechanical Properties and Adhesive Scuffing Wear Behavior of Stir Cast Cu-Sn-Ni/Si3N4 Composites”, ASME Journal of Tribology, vol. 139, no. 6, pp. 1-9, 2017.
Publisher : ASME Journal of Tribology, American Society of Mechanical Engineers
Year : 2017
Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
Cite this Research Publication :
Dr. Radhika N, “Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite”, Transactions of the Indian Institute of Metals, vol. 70, no. 1, pp. 145-157, 2017.
Publisher : Transactions of the Indian Institute of Metals
Year : 2017
The mechanical properties and abrasive wear behavior of functionally graded aluminum/AlB2 composites produced by centrifugal casting
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “The mechanical properties and abrasive wear behavior of functionally graded aluminum/AlB2 composites produced by centrifugal casting”, Particulate Science and Technology, vol. 35, no. 5, pp. 575-582, 2017.
Publisher : Particulate Science and Technology, Taylor and Francis Inc
Year : 2017
Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi’s Technique
Cite this Research Publication :
Dr. Radhika N and Raghu Raman, “Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique”, ASME Journal of Tribology, vol. 139, no. 4, pp. 1-10, 2017.
Publisher : ASME Journal of Tribology, American Society of Mechanical Engineers (ASME)
Year : 2017
Investigation of adhesive wear behaviour of zirconia reinforced aluminium metal matrix composite
Cite this Research Publication :
Dr. Radhika N and M.L. Venkata Priyanka, “Investigation of adhesive wear behaviour of zirconia reinforced aluminium metal matrix composite”, Journal of Engineering Science and Technology, vol. 12, no. 6, pp. 1685-1696, 2017.
Publisher : Journal of Engineering Science and Technology, Taylor's University,
Year : 2017
Influence of process parameters on three body abrasive wear behaviour of functionally graded Aluminium alloy reinforced with alumina
Cite this Research Publication :
Dr. Radhika N, M. Praveen, and Swarnava Mukherjee, “Influence of process parameters on three body abrasive wear behaviour of functionally graded Aluminium alloy reinforced with alumina”, Journal of Engineering Science and Technology, vol. 12, no. 11, pp. 2866-2879, 2017.
Publisher : Journal of Engineering Science and Technology
Year : 2017
Fabrication of LM25/SiO2metal matrix composite and optimization of wear process parameters using design of experiment
Cite this Research Publication :
Dr. Radhika N, “Fabrication of LM25/SiO2metal matrix composite and optimization of wear process parameters using design of experiment”, Tribology in Industry, vol. 39, no. 1, pp. 1-8, 2017.
Publisher : Tribology in Industry, Faculty of Engineering, University of Kragujevac
Year : 2017
Experimental investigation on tribological characteristics of silicon nitride reinforced aluminium metal matrix composites
Cite this Research Publication :
D. .Bhuvanesh and Dr. Radhika N, “Experimental investigation on tribological characteristics of silicon nitride reinforced aluminium metal matrix composites”, Journal of Engineering Science and Technology, vol. 12, no. 5, pp. 1295-1306, 2017.
Publisher : Journal of Engineering Science and Technology
Year : 2017
Experimental Analysis on Three Body Abrasive Wear Behaviour of Stir Cast Al LM 25/TiC Metal Matrix Composite
Cite this Research Publication :
Dr. Radhika N and K. Sai Charan, “Experimental Analysis on Three Body Abrasive Wear Behaviour of Stir Cast Al LM 25/TiC Metal Matrix Composite”, Transactions of the Indian Institute of Metals, vol. 70, no. 9, pp. 2233–2240, 2017.
Publisher : Transactions of the Indian Institute of Metals, Springer India,
Year : 2017
Effect of reinforcement content on the adhesive wear behavior of Cu10Sn5Ni/Si3N4 composites produced by stir casting
Cite this Research Publication :
K. Sanesh, S. Shiam Sunder, and Dr. Radhika N, “Effect of reinforcement content on the adhesive wear behavior of Cu10Sn5Ni/Si3N4 composites produced by stir casting”, International Journal of Minerals, Metallurgy and Materials, vol. 24, no. 9, pp. 1052-1060, 2017.
Publisher : International Journal of Minerals, Metallurgy and Materials, University of Science and Technology Beijing
Year : 2017
Characterization of mechanical properties and three-body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Characterization of mechanical properties and three-body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite”, Materials Science and Engineering Technology, vol. 48, no. 9, pp. 882-892, 2017.
Publisher : Materials Science and Engineering Technology, Wiley-VCH Verlag,
Year : 2016
Synthesis of functionally graded Al LM25/zirconia composite and its sliding wear characterization using response surface methodology
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Synthesis of functionally graded Al LM25/zirconia composite and its sliding wear characterization using response surface methodology”, Iranian Journal of Materials Science & Engineering, vol. 13, no. 4, pp. 41-52, 2016.
Publisher : Iranian Journal of Materials Science & Engineering.
Year : 2016
Energy Efficiency in Mobile Cloud Computing: A Survey
Cite this Research Publication : S. S. and Dr. Radhika N., “Energy Efficiency in Mobile Cloud Computing: A Survey”, Asian Journal of Information Technology, vol. 15, no. 20, pp. 4094-4101, 2016.
Publisher : Asian Journal of Information Technology
Year : 2016
Tribological and Frictional Characteristics of Alsi7mgWc-Graphite Hybrid Composites
Cite this Research Publication :
K. P. Vetrivel, R. Subramanian, K. Somasundaravinoth, and Dr. Radhika N, “Tribological and Frictional Characteristics of Alsi7mgWc-Graphite Hybrid Composites ”, Asian Journal of Research in Social Sciences and Humanities, vol. 6, no. 9, pp. 212-220, 2016.
Publisher : Asian Journal of Research in Social Sciences and Humanities.
Year : 2016
Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB 2 Composites.
Cite this Research Publication :
K. S. Arunagiri and Dr. Radhika N, “Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB 2 Composites.”, Tribology in Industry, vol. 38, no. 3, pp. 277-285, 2016.
Publisher : Tribology in Industry
Year : 2016
Studies on adhesive wear characteristics of heat treated aluminium LM25/AlB2 composites
Cite this Research Publication : K. S. Arunagiri and Radhika, N., “Studies on adhesive wear characteristics of heat treated aluminium LM25/AlB2 composites”, Tribology in Industry, vol. 38, pp. 277-285, 2016.
Publisher : Tribology in Industry.
Year : 2016
Fabrication and characterization of Al LM25/TiB2 in-situ composites
Cite this Research Publication :
J. Dinesh, G Mohammad Ashraf, and Dr. Radhika N, “Fabrication and characterization of Al LM25/TiB2 in-situ composites”, ARPN Journal of Engineering and Applied Sciences , vol. 11, pp. 6001-6005, 2016.
Publisher : ARPN Journal of Engineering and Applied Sciences
Year : 2016
Effect of heat treatment on the wear behaviour of functionally graded LM13/B4C composite
Cite this Research Publication :
L. V. Priyanka Muddamsetty and Dr. Radhika N, “Effect of heat treatment on the wear behaviour of functionally graded LM13/B4C composite”, Tribology in Industry, vol. 38, pp. 108-114, 2016.
Publisher : Tribology in Industry, Masinski Fakultet - Kragujevac
Year : 2016
Effect of abrasive medium on wear behavior of Al/AlB2 functionally graded metal matrix composite
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Effect of abrasive medium on wear behavior of Al/AlB2 functionally graded metal matrix composite”, Tribology Online, vol. 11, pp. 487-493, 2016.
Publisher : Tribology Online, Japanese Society of Tribologists,
Year : 2016
Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties”, Transactions of Nonferrous Metals Society of China (English Edition), vol. 26, pp. 905-916, 2016.
Publisher : Transactions of Nonferrous Metals Society of China (English Edition)
Year : 2016, 2018
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Cite this Research Publication : Dr. Radhika N, “Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites”, Science and Engineering of Composite Materials, 2016.
Publisher : Science and Engineering of Composite Materials.
Year : 2016
Analysis of tribological behaviour of functionally graded LM13 aluminium/TiS2 composite using design of experiments
Cite this Research Publication :
Dr. Radhika N, “Analysis of tribological behaviour of functionally graded LM13 aluminium/TiS2 composite using design of experiments”, Tribology in Industry, vol. 38, pp. 425-434, 2016.
Publisher : Tribology in Industry.
Year : 2016
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Cite this Research Publication :
Dr. Radhika N, “Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites”, Science and Engineering of Composite Materials, 2016.
Publisher : Science and Engineering of Composite Materials,
Year : 2015
Studies on mechanical properties and tribological behaviour of LM25/SiC/Al2O3 composites
Cite this Research Publication :
Dr. Radhika N, Balaji, T. V., and Palaniappan, S., “Studies on mechanical properties and tribological behaviour of LM25/SiC/Al2O3 composites”, Journal of Engineering Science and Technology, vol. 10, pp. 134-144, 2015.
Publisher : Journal of Engineering Science and Technology
Year : 2015
Prediction of Tool Condition During Turning of aluminium/alumina/graphite Hybrid Metal Matrix Composites Using Machine Learning Approach
Cite this Research Publication :
Dr. Radhika N, “Prediction of Tool Condition During Turning of aluminium/alumina/graphite Hybrid Metal Matrix Composites Using Machine Learning Approach”, Journal of Engineering Science and Technology, vol. 10, pp. 1310–1325, 2015.
Publisher : Journal of Engineering Science and Technology
Year : 2015
Parametric Study Of Dry Sliding Wear Behaviour Of Functionally Graded Al Lm25/Si3n4 Composite By Response Surface Methodology
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Parametric Study Of Dry Sliding Wear Behaviour Of Functionally Graded Al Lm25/Si3n4 Composite By Response Surface Methodology”, ADVANCED COMPOSITES LETTERS, vol. 24, pp. 130–136, 2015.
Publisher : ADVANCED COMPOSITES LETTERS
Year : 2015
Multi-objective optimization of EDM parameters using grey relation analysis
Cite this Research Publication :
Dr. Radhika N, G. Chandran, K., Shivaram, P., and Karthik, K. T. Vijay, “Multi-objective optimization of EDM parameters using grey relation analysis”, Journal of Engineering Science and Technology, vol. 10, pp. 1-11, 2015.
Publisher : Journal of Engineering Science and Technology
Year : 2015
Mechanical and tribological properties of functionally graded aluminium/zirconia metal matrix composite synthesized by centrifugal casting
Cite this Research Publication : Dr. Radhika N and .Raghu, R., “Mechanical and tribological properties of functionally graded aluminium/zirconia metal matrix composite synthesized by centrifugal casting”, International Journal of Materials Research, vol. 106, pp. 1174-1181, 2015.
Publisher : International Journal of Materials Research
Year : 2015
Investigation of mechanical behaviour and tribological properties of coir and sugarcane bagasse fibers filled epoxy composites
Cite this Research Publication :
V. Midhun and Dr. Radhika N, “Investigation of mechanical behaviour and tribological properties of coir and sugarcane bagasse fibers filled epoxy composites”, International Journal of Applied Engineering Research, vol. 10, pp. 37076-37081, 2015.
Publisher : International Journal of Applied Engineering Research, Research India Publications
Year : 2015
Experimental investigation on abrasive wear behavior of functionally graded aluminum composite
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Experimental investigation on abrasive wear behavior of functionally graded aluminum composite”, Journal of Tribology, vol. 137, 2015.
Publisher : Journal of Tribology, American Society of Mechanical Engineers (ASME)
Year : 2015
Evaluation of dry sliding wear characteristics of LM 13 Al/B4C composites
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Evaluation of dry sliding wear characteristics of LM 13 Al/B4C composites”, Tribology in Industry, vol. 37, pp. 20-28, 2015.
Publisher : Tribology in Industry, Masinski Fakultet - Kragujevac,
Year : 2015
Dry sliding wear behaviour of aluminium Al-Si12Cu/TiB2 metal matrix composite using response surface methodology
Cite this Research Publication :
Dr. Radhika N and Raghu, R., “Dry sliding wear behaviour of aluminium Al-Si12Cu/TiB2 metal matrix composite using response surface methodology”, Tribology Letters, vol. 59, pp. 1-9, 2015.
Publisher : Tribology Letters, Springer New York LLC
Year : 2015
Adhesive wear behaviour of aluminium hybrid metal matrix composites using genetic algorithm
Cite this Research Publication :
Dr. Radhika N, Vijaykarthik, K. T., and Shivaram, P., “Adhesive wear behaviour of aluminium hybrid metal matrix composites using genetic algorithm”, Journal of Engineering Science and Technology, vol. 10, pp. 258-268, 2015.
Publisher : Journal of Engineering Science and Technology
Year : 2014
Study of wear behaviour of Al/(Al2O3P and SiCP) hybrid metal matrix composities
Cite this Research Publication : Dr. Radhika N, Praveen, G., and P Rathan, G., “Study of wear behaviour of Al/(Al2O3P and SiCP) hybrid metal matrix composities”, Malaysian Journal of Science, vol. 33, 1 vol., pp. 78–88, 2014.
Publisher : Malaysian Journal of Science
Year : 2014
Optimization of electrical discharge machining parameters of aluminium hybrid composites using Taguchi method
Cite this Research Publication :
Dr. Radhika N, Sudhamshu, A. R., and G. Chandran, K., “Optimization of electrical discharge machining parameters of aluminium hybrid composites using Taguchi method”, Journal of Engineering Science and Technology, vol. 9, pp. 502-512, 2014.
Publisher : Journal of Engineering Science and Technology, Taylor's University
Year : 2014
Optimisation of dry sliding wear process parameters for aluminium hybrid metal matrix composites
Cite this Research Publication :
Dr. Radhika N, Vaishnavi, A., and Chandran, G. K., “Optimisation of dry sliding wear process parameters for aluminium hybrid metal matrix composites”, Tribology in Industry, vol. 36, pp. 188-194, 2014.
Publisher : Tribology in Industry, Masinski Fakultet - Kragujevac,
Year : 2014
Multi-objective optimization in electric discharge machining of aluminium composite
Cite this Research Publication :
Dr. Radhika N, .Shivaram, P., and Karthik, K. T. V., “Multi-objective optimization in electric discharge machining of aluminium composite”, Tribology in Industry, vol. 36, pp. 428-436, 2014.
Publisher : Tribology in Industry
Year : 2014
Fabrication and Mechanical Properties of Stir Cast Al-Si12Cu/B4C Composities
Cite this Research Publication : T. Raviteja, Dr. Radhika N, and Raghu, R., “Fabrication and Mechanical Properties of Stir Cast Al-Si12Cu/B4C Composities”, International Journal of Research in Engineering and Technology, vol. 3, no. 7, pp. 343-346, 2014.
Publisher : International Journal of Research in Engineering and Technology,
Year : 2014
Effect of ageing time on mechanical properties and tribological behaviour of aluminium hybrid composite
Cite this Research Publication :
Dr. Radhika N and Subramanian, Rb, “Effect of ageing time on mechanical properties and tribological behaviour of aluminium hybrid composite”, International Journal of Materials Research, vol. 105, pp. 875-882, 2014.
Publisher : International Journal of Materials Research
Year : 2014
Analysis of Tribological Behavior of Aluminium/B 4 C Composite Under Dry Sliding Motion
Cite this Research Publication :
S. N Prabhakar, Dr. Radhika N, and Raghu, R., “Analysis of Tribological Behavior of Aluminium/B 4 C Composite Under Dry Sliding Motion”, Procedia Engineering, vol. 97, pp. 796-807, 2014.
Publisher : Procedia Engineering
Year : 2014
Analysis of chip formation in machining aluminium hybrid composites
Cite this Research Publication :
Dr. Radhika N, R., S., and A., S., “Analysis of chip formation in machining aluminium hybrid composites”, E3 Journal of Scientific Research, vol. 2, pp. 09-15, 2014.
Publisher : E3 Journal of Scientific Research
Year : 2013
Wear behaviour of Aluminium/alumina/graphite hybrid metal matrix composite using Taguchi’s techniques
Cite this Research Publication :
Dr. Radhika N, S Prasat, V., and Subramanian, R., “Wear behaviour of Aluminium/alumina/graphite hybrid metal matrix composite using Taguchi's techniques”, Industrial Lubrication and Tribology, vol. 65, pp. 166-17, 2013.
Publisher : Industrial Lubrication and Tribology
Year : 2013
Pattern recognition based surface roughness prediction in turning hybrid metal matrix composite using random forest algorithm
Cite this Research Publication :
Dr. Radhika N, S Senapathi, B., Subramaniam, R., Subramany, R., and Vishnu, K. N., “Pattern recognition based surface roughness prediction in turning hybrid metal matrix composite using random forest algorithm”, Industrial Lubrication and Tribology, vol. 65, no. 5, pp. 311–319, 2013.
Publisher : Industrial Lubrication and Tribology, Emerald Group Publishing Limited
Year : 2013
Machining parameter optimisation of an aluminium hybrid metal matrix composite by statistical modelling
Cite this Research Publication :
Dr. Radhika N, Subramaniam, Rb, and Senapathi, S. Ba, “Machining parameter optimisation of an aluminium hybrid metal matrix composite by statistical modelling”, Journal of Industrial Lubrication and Tribology, vol. 65, pp. 425-435, 2013.
Publisher : Journal of Industrial Lubrication and Tribology
Year : 2013
Effect of reinforcement on wear behaviour of aluminium hybrid composites
Cite this Research Publication :
Dr. Radhika N and Subramanian, Rb, “Effect of reinforcement on wear behaviour of aluminium hybrid composites”, Tribology - Materials, Surfaces and Interfaces, vol. 7, pp. 36-41, 2013.
Publisher : Tribology - Materials, Surfaces and Interfaces
Year : 2013
Influence of process parameters on wear behaviour of hybrid aluminium composites
Cite this Research Publication : Dr. Radhika N and .Subramanian, R., “Influence of process parameters on wear behaviour of hybrid aluminium composites”, International Journal of Operations Systems and Human Resource Management, vol. 3, pp. 27-35, 2013.
Publisher : International Journal of Operations Systems and Human Resource Management
Year : 2012
Major inhibitors of cloud computing 2012
Cite this Research Publication :
A. Amma, Pramod, V. R., and N. Radhika, “Major inhibitors of cloud computing 2012”, International Journal of Computer Applications, vol. 87, no. 11, 2012.
Publisher : International Journal of Computer Applications
Year : 2012
Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites using Taguchi’s techniques
Cite this Research Publication :
Dr. Radhika N, Subramanian, R., S Prasat, V., and Anandavel, B., “Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites using Taguchi's techniques”, Industrial Lubrication and Tribology, vol. 64, pp. 359–366, 2012.
Publisher : Emerald Group Publishing Limited
Year : 2011
Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi’s techniques
Cite this Research Publication :
Dr. Radhika N, Subramanian, R., S Prasat, V., and , “Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi’s techniques”, Journal of Minerals and Materials Characterization and Engineering, vol. 10, pp. 427-443, 2011.
Publisher : Scientific Research Publishing
Year : 2011
Influence of parameters on the dry sliding wear behaviour of aluminium/fly ash/graphite hybrid metal matrix composites
Cite this Research Publication :
SaVenkat Prasat, Subramanian, Rb, Dr. Radhika N, Anandavel, Bb, Arun, La, and Praveen, Na, “Influence of parameters on the dry sliding wear behaviour of aluminium/fly ash/graphite hybrid metal matrix composites”, European Journal of Scientific Research, vol. 53, pp. 280-290, 2011.
Publisher : European Journal of Scientific Research
Year : 2011
Dry sliding wear and friction studies on AlSi10Mg-fly ash-graphite hybrid metal matrix composites using Taguchi method
Cite this Research Publication :
V. S. Prasat, Subramanian, R., Dr. Radhika N, and Anandavel, B., “Dry sliding wear and friction studies on AlSi10Mg-fly ash-graphite hybrid metal matrix composites using Taguchi method”, Tribology - Materials, Surfaces and Interfaces, vol. 5, pp. 72-81, 2011.
Publisher : Tribology - Materials, Surfaces and Interfaces
Year : 2005
Determination of weld process parameters for precisional welding: A DOE & FEA Approach
Cite this Research Publication :
Dr. Radhika N, Srinivasan, P. S. S., K. Kumar, S., and M. Davidson, J., “Determination of weld process parameters for precisional welding: A DOE & FEA Approach”, National Journal of “Manufacturing Technology Today”, pp. 3-6, 2005.
Publisher : National Journal of “Manufacturing Technology Today