Microstructural Evolution and Anti-Corrosion Characteristics of As-Cast and LPBF Printed Inconel Plates in Seawater Environment
Authors : Dr. Radhika N., Jeyaprakash N.; Yang C.-H.; Karuppasamy S.S.
Publisher : World Scientific
Electrochemical and hot corrosion behaviour of steel reinforced with AlSiBeTiV high entropy alloy using friction stir processing
Authors : Dr. Radhika N., Sundaram Ragunath, Sivanandam, Aravind Krishna, Natarajan Jeyaprakash
Publisher : Taylor and Francis Ltd.
Planar equilibria of sessile and pendant liquid drops on geometrically non-linear elastic membranes
Authors : Dr. Vineet Nair, V. Nair, I. Sharma, and V. Shankar
Influence of variable injection pressure and split injection on combustion and emission behavior of an engine with Diesel-Biodiesel blends
Authors : Senthilkumar D., Goutham Subramani, Sivanesan M., Srihari S.
Investigation of Usage of Artificial Neural Network Algorithms for Prediction of In-Cylinder Pressure in Direct Injection Engines
Authors : Senthilkumar D., Sivanesan M., Srihari S.
Effect of well Thermal Boundary Conditions on Flame Dynamics of CH4-Air Mixtures in Straight Microtubes
Authors : Dr. Ratna Kishore V., Aditya P Singh; V.; Y.Yoon; S.Minaev; Sudarshan Kumar
Publisher : International Journal of Combustion Science and Technology
Studies on Mechanical Behavior of Al/Ni Coated silicon Carbide Reinforced Functionally Graded Composite
Authors : Dr. Radhika N., Mohandas;
Publisher : Tribology in Industry
Numerical solution of doubly singular boundary value problems by finite difference method
Authors : Dr. V. M. K. Prasad Goura, Pradip Roul
Publisher : Springer International Publishing
Modelling of Homogeneous Mixture Formation and combustion in GDI Engine with Negative Valve Overlap
Authors : K.Lalith; Akilradhakrishnan; S.Srihari; V.Rathnakishore; Akshay Dinesh; S.Unnikrishnan
Publisher : ISRN Mechanical Engineering
A Combined AHP and ISM–based Model to Assess the Agility of Supply Chain-A Case Study
Authors : PG Saleeshya, KS Thampi
Publisher : International Journal of Integrated Supply Management
A review on small scale wind turbines
Authors : Dr. Ratna Kishore V., Abhishiktha Tummala;.; Dipankur Kumar Sinha; V. Indraja; V. Hari Krishna
Publisher : Renewable and Sustainable Energy Reviews
Optimization of Cryogenic Turning Process Parameters Using Grey Relational Analysis (GRA) in Super-Duplex Stainless Steel (A479)
Authors : Dr. Sanjivi Arul, Akhil K.T., Shunmugesh K
Publisher : Recent Advances in Mechanical Engineering Springer
Effect of Cryogenic Treatment on Mechanical Properties of Aluminium Alloy AA2014
Authors : Dr. Govindaraju M., Chaanthini, M.K., Arul, S.
Publisher : Journal of The Institution of Engineers (India)
Development of tool condition monitoring system in end milling process using wavelet features and Hoelder’s exponent with machine learning algorithms
Authors : Dr. T. Mohanraj, Yerchuru, J., Krishnan, H., Nithin Aravind, R.S., Yameni, R.
Publisher : Measurement: Journal of the International Measurement Confederation
Development of a supply chain risk mitigation index for distillery
Authors : Dr. Raghuram P., Sandeep.P., Sreedharan.V.R., Saikouk.T
Publisher : TQM Journal
Application of artificial neural network techniques in computer aided process planning – A review
Authors : Dr. Gokulachandran J., Natarajan, K.K.
Publisher : International Journal of Process Management and Benchmarking
An analysis of various factors influencing postharvest losses of the fruit and vegetable supply chain
Authors : Dr. Anbuudayasankar S. P., Narenthiran, N.; Prasanna, P.; Poongkundran, T.; ..; M S, Narassima; Aravind, P.
Publisher : Volume 7
Modified friction stir clinching of 2024-T3 to 6061-T6 aluminium alloy: Effect of dwell time and precipitation-hardening heat treatment
Authors : Dr. R. Vaira Vignesh, Paidar, M., Tahani, K., Vaira Vignesh, R., Ojo, O.O., Ezatpour, H.R.
Publisher : Materials Science and Engineering
Experimental and numerical analysis of soil-to-air heat exchanger system for domestic buildings
Authors : Dr. M. Ramu, Damodharan A., Ramu Murugan, Abuthakeer S
Publisher : Thermal Science
Productivity improvement through lean initiatives: A service sector case study in India
Authors : Chandran, A., Saleeshya, P.G.
Publisher : International Journal of Business Innovation and Research
Characterization and wear behaviour of WC-Co coated copper under dry sliding conditions
Authors : , Jojith R.,Vigneshwar Raj R.
Publisher : Tribology in Industry
Wear and friction study of centrifugally cast functionally graded cu-ni-si alloy and composite
Publisher : Tribology in Industry
A Numerical Investigation on Fluid Dynamics and Heating Characteristics of Co-and-Counterrotating Multiple Swirling Impinging Flames Arranged in 3×3 Inline Array
Authors : Dr. Ratna Kishore V., Parampreet Singh,Subhash Chander
Publisher : Journal of thermal science engineering application
Microstructural, mechanical and tribological analysis of functionally graded copper composite
Authors : Dr. Radhika N., Sam M.
Publisher : International Journal of Cast Metals Research
Design of combined cam and piercing progressive die set for a sheet metal component
Authors : Dr. M. Thenarasu, Rahul R.
Publisher : International Journal on Emerging Technologies
Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite
Authors : Dr. Radhika N., Sasikumar J, Jojith R
Publisher : Silicon
Effect of T6 Treatment on Wear Behavior of Al-7Si/ ZrSiO4 Composites
Authors : Satish Kumar, S. Shalini, G. Suganya Priyadharshini
Publisher : Silicon
Assembly line balancing and workstation design for a manufacturing industry
Authors : Dr. M. Thenarasu, Mazumder S, Padmanabhan S
Publisher : International Journal of Scientific and Technology Research
Optimization of cutting parameters for mrr, tool wear and surface roughness characteristics in machining adc12 piston alloy using doe
Authors : Dr. Ilangovan S., Dr. Radhika N., Kumar H.D, Ilangovan S
Publisher : Tribology in Industry
Effect of nanoparticles loading on free vibration response of epoxy and filament winding basalt/epoxy and E-glass/epoxy composite tubes: Experimental, analytical and numerical investigations
Authors : Dr. Ilangovan S., Ilangovan, S., Senthil Kumaran, S., Naresh, K.
Publisher : Materials Research Express
Tool condition monitoring techniques in milling process-a review
Authors : Dr. T. Mohanraj, Dr. Shankar S., Dr. Sakthivel N. R., Mohanraj, T., Shankar, S., Rajasekar, R., Sakthivel, N.R., Pramanik, A.
Publisher : Journal of Materials Research and Technology
Investigations on effect of split and retarded injection on the performance characteristics of engines with cashew nut shell biodiesel blend
Authors : Senthilkumar D., Late Dr. Thirumalini S. (Memorial Page), D.Senthilkumar, S.Thirumalini
Publisher : International Journal of Ambient Energy
An experimental investigation on the enhanced thermal behavior of packed beds integrated with Al2O3 nanofluid
Authors : Dr. M. Ramu, Chidambara Raja S., Kumaraswamidhas L.A., Ramu M.
Publisher : Journal of Enhanced Heat Transfer
Responsiveness model of the textile supply chain – a structural equation modelling-based investigation
Authors : Dr. Raghuram P., Dr. Saleeshya P. G., P. Raghuram; P.G. Saleeshya
Publisher : International Journal of Services and Operations Management
Study on the Influence of Relative Humidity on Pressure Drop Across Air Filter of Diesel Engine
Authors : Nanthakumar P., Padmakumar V
Publisher : IJAER , Volume 10, Issue 19 (2016)
Investigations on flame dynamics of premixed H 2–air mixtures in microscale tubes
Authors : Dr. Ratna Kishore V., Aravind, B, Singh, Aditya P; Yoon, Y; Minaev, S; Kumar, Sudarshan
Publisher : RSC advances, Royal Society of Chemistry, Volume 6, Issue 55, p.50358–50367
Numerical Simulation of Low Velocity Impact Analysis of Fiber Metal Laminates
Authors : Dr. Prakash Marimuthu K., Devarajan K., Kartik Balkumar, Abishek V. Iyer, Abishek Ramasubramanian
Publisher : Mechanics and Mechanical Engineering
Cloud-based technology for small and medium scale enterprises: A decision-making paradigm using IPA, AHP and fuzzy-AHP techniques
Authors : Prashant R. Nair, S.P. Anbuudayasankar; R. Srikanthan, M. Karthik; Prashant R. Nair; P. Indukumar
Publisher : International Journal of Integrated Supply Management
Novel adhesion promotion of aluminium for aerospace environments
Authors : Dr. Shantanu Bhowmik, Prakash, H.; Ajeesh, G.; Thenarasu, M.
Publisher : Volume 52, Issue 6
Synthesis of Hybrid Black Toner from Waste Toner using Nano Technology – Optimization Technique – Phase 2
Authors : Dr. R. Vaira Vignesh
Publisher : Journal of Material Science Engineering in association with the 2nd International Conference and Exhibition on Materials Science and Engineering
Synthesis of Hybrid Black Toner from Waste Toner Using Nano Technology–Optimization Technique
Authors : Dr. R. Vaira Vignesh
Publisher : International Journal of Engineering and Technology
Characterization of hybrid black toner using the parameters waste toner and Nano phase carbon
Authors : Dr. R. Vaira Vignesh, C. Krishnaraj
Publisher : ARPN Journal of Engineering and Applied Sciences
Optimization of Hybrid Black Toner Synthesis from Waste Toner
Authors : Dr. R. Vaira Vignesh
Publisher : International Journal of Innovative Research in Science, Engineering and Technology
Single Variable Algorithm Optimized Hybrid Black Toner Synthesis from Waste Toner and Nano Phase Carbon
Authors : Dr. R. Vaira Vignesh
Publisher : Karpagam Journal of Engineering Research
Empirical Investigation of Supply Disruption in Plastic SMEs
Authors : Dr. Raghuram P., Dhianeshwar
Agent_based modelling in Capacitated Lot Sizing Problem with Sequence dependent Setup time
Authors : Dr. Raghuram P., Sulaiman, S.
Modeling and Assessment of the Impact of Supply Disruption and Cost of Recovery using Systems Dynamics Approach
Authors : Dr. Raghuram P., Harisankar, G
Responsiveness Model of Textile Supply Chain – A Structural Equation Modeling based Investigation
Authors : Dr. Raghuram P., Saleeshya, P. G.
Clustering-based heuristic for the workload balancing problem in enterprise logistics
Authors : Dr. Anbuudayasankar S. P., Ganesh, K., S. C. Lenny Koh, and Mohandas K.
Publisher : International Journal of Value Chain Management
GRAHP TOP model for supplier selection in Supply Chain: A hybrid MCDM approach
Authors : Dr. Anbuudayasankar S. P., Venkata Krishnarao Koganti, Nagaraju Menikonda, T. Krishnaraj, Rajesh Kumar Athhukuri, and Mokkapati Sai Vastav
Publisher : Decision Science Letters
Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5
Authors : Dr. Sanjivi Arul, Nandu Mohan.
Multi constraints applied energy efficient routing technique based on ant colony optimization used for disaster resilient location detection in mobile ad-hoc network
Authors : Dr. Karthick S., Dr. Prabhu E., A. Christy Jeba Malar; M. Kowsigan; N. Krishnamoorthy; K. Venkatachalam
Publisher : Journal of Ambient Intelligence and Humanized Computing
Characterisation of aluminium alloy (Lm6) metal matrix composite reinforced with copper slag/ferro sand
Authors : Dr. Sanjivi Arul, Prabhakaran, A
Astray state-laminar forced convective heat transfer of Al2O3 – H2O nanofluid through 3D-rectangular cross-sectional duct
Authors : Srinivaas A., Shiva Guru Prakash G.
Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel
Authors : Dr. Sanjivi Arul, Mohan, N.
Publisher : Materials Today: Proceedings.
Investigations on Effect of Split and Retarded Injection on the Performance Characteristics of Engines
Authors : Senthil Kumar, S. Thirumalini
Experimental Investigation of Evaporative Emission with Variation in Material Characterestic and Fuel Levels
Authors : S, S.Thirumalini
Optimizing the Financial Performance of Supply Chain- A Case Study
Authors : G.Saleeshya; Vinayak Rajan; Nijil Premkumar;G.Saleeshya
Publisher : International Journal of Advanced Operations Management
Warehouse optimisation using demand data analytics – a case study-based approach
Authors : Dr. Raghuram P., Singh, A.
Publisher : International Journal of Business Information Systems
Delivery Service through an Integrated Inventory Management Model using a System Dynamics Model
Authors : Dr. Saleeshya P. G., Dr. Raghuram P., Mridula Sahay
Online Teaching
Authors : Dr. Sanjivi Arul, Ranjan; and Jayanthi.
Vision Based Weld Bead Measurement
Authors : Dr. Sanjivi Arul, S.Remya.
Determination of Surgical Spot Coordinates from CT Scan Images of Brain to Position the Stereotactic Neurosurgical Manipulator
Authors : Dr. Sanjivi Arul, Vysakh V
Ultrasonics in the construction of mobility aid for the blind
Authors : Dr. Raghuram P.
Publisher : Kumaraguru College of Technology
Optimum Scheduling/Cost Control Using Network Analysis
Authors : Dr. Gokulachandran J., Dr. Raghuram P.
Publisher : Journal of Industrial Engineering
A Methodology for Reducing Quality Loss and Rework in a Three-part Selective Assembly-A Case Study
Authors : Dr. Sanjivi Arul, G. K., and P.V., M.
Publisher : International Journal on Advanced Manufacturing System
Design Optimization of Complex Structures using Metamodels
Authors : Dr. M. Ramu, V Prabhu Raja, P. R. Thyla, and Gunaseelan. M
Publisher : Jordan Journal of Mechanical and Industrial Engineering
Neighborhood search assisted particle swarm optimization (NPSO) algorithm for partitional data clustering problems
Authors : Dr. R. Karthi, Dr. Ramesh Kumar K., Rajendran, Cb
Publisher : Communications in Computer and Information Science
Application of a simplified simulation method to the determination of arc efficiency of gas tungsten arc welding (GTAW) and experimental validation
Authors : Dr. Sanjivi Arul, R. Sellamuthu
Publisher : International Journal of Computational Materials Science and Surface Engineering
Safe, Sustainable and Smart Charging of Plug in Hybrid Electric Vehicles (PHEVs)
Authors : Late Dr. Thirumalini S. (Memorial Page), Ajaykrishna Ramasubramanian; S. Thirumalini; Vishnu Padmanaban; Manikandaraj Srinivasan
Publisher : World Academy of Science, Engineering and Technology
An investigation of the effect of Ni content and hardness on the wear behaviour of sand cast Cu-Ni-Sn alloys
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : International Journal of Microstructure and Materials Properties
Heuristic approach for balanced allocation problem in logistics: A comparative study
Authors : Dr. Anbuudayasankar S. P., Sivakumar, P.a; K. Ganesh; Punniyamoorthy, M.d; Lenny Koh, S.C.e
Publisher : International Journal of Operational Research
FEM Analysis of Efect of Rolling Parameters on cold rolling process
Authors : Dr. Ajith Ramesh, Dr. Prakash Marimuthu K.
Publisher : Bonfring International journal of industrial Engineering and Management
A combined AHP and ISM-based model to assess the agility of supply chain–a case study
Authors : Dr. Saleeshya P. G., Dr. Raghuram P., Thampi, Karthik Suresh
Publisher : Inderscience Publishers
Assessment on the adoption of low carbon and green supply chain management practices in Indian supply chain sectors – manufacturing and service industries
Authors : Dr. Anbuudayasankar S. P., Lenny Koh, S.C.; Ganesh, K.; Nandakumar Chidambaram
Publisher : International Journal of Business and Globalisation
Application of Stand Alone System and hybrid System for Fault Diagnosis of Centrifugal Pump using time domain features and Statistical Features
Authors : Dr. Sakthivel N. R., Dr. Binoy B. Nair, Roy R.S; Sugumaran V
Publisher : International Journal of Data Mining,Modelling and Management
A study on the effect of SiC reinforcement on the surface and tribological behavior on Al-Metal Matrix Composites
Authors : Dr. Ilangovan S.
Publisher : Applied Mechanics and Materials
REFING: Heuristic to solve bi-objective resource allocation problem with bound and varying capacity
Authors : Dr. Anbuudayasankar S. P.
Publisher : International Journal of Operational Research
Non-linear 3D Finite Element Analysis of the Femur Bone
Authors : Dr. Sivakumar V., U. N. Asish Ramesh
Publisher : International Journal of Research in Engineering and Technology (IJRET)
Effects of tin on hardness, wear rate and coefficient of friction of cast Cu-Ni-Sn alloys
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : Journal of Engineering Science and Technology
Development of a regression model relating experimentally measured arc parameters and gas tungsten arc welding process variables
Authors : Dr. Sanjivi Arul, R. Sellamuthu
Publisher : International Journal of Computational Materials Science and Surface Engineering
Comparative studies on GTA and PCGTA weldments of AISI 4140 and AISI 316 dissimilar metals
Authors : Dr. Narayanan
Publisher : International Journal of Microstructure and Materials Properties
A Study on the Effect of Processing Parameters on the Quality of Parts made by Low Cost 3D Printer (submitted for publication)
Authors : Prof. Sriram Devanathan, Elangovan, M., and Aditya, T. N
Publisher : International Journal of Research in Engineering and Technology
Study of Effect of Cooling Rate on Mechanical and Tribological Properties of Cast Al-6.5Cu Aluminium Alloy
Authors : Dr. Ilangovan S., Viswanathan Saikrishna, and K. Gopinath Niranthar
Publisher : International Journal of Research in Engineering and Technology
Raw Material Preheating by a Novel Energy Recycling Method in Metal Casting, with the Application of Design of Experiments and Regression Analysis (Accepted)
Authors : Prof. Sriram Devanathan, J., S., K., P. Marimuthu, and I., R. K
Publisher : Journal of Cleaner Production
Measurement of hardness, wear rate and coefficient of friction of surface refined Al-Cu alloy
Authors : Dr. Sanjivi Arul, V. Gopi, and R. Sellamuthu
Publisher : Procedia Engineering
Investigation on the effect on the SiC reinforced aluminum metal matrix composites
Authors : Dr. Ilangovan S., Rameshkumar K A, Balamurugan K, and Gnanaraj D
Publisher : Advanced Composites Letters
Investigation of the Mechanical, Corrosion Properties and Wear Behaviour of Electroless Ni-P plated Mild Steel
Authors : Dr. Ilangovan S.
Publisher : International Journal of Research in Engineering and Technology
Improving Surface Hardness of Mild Steel Plates by Addition of Silicon Carbide Using Gas Tungsten Arc as Heat Source
Authors : Dr. Sanjivi Arul, H. G Reddy, and Sellamuthu, R.
Publisher : Applied Mechanics and Materials
Heat transfer modelling and investigation of the effect of pulse frequency and current in pulsed current gas tungsten arc welding
Authors : Dr. Sanjivi Arul, A. Prabakaran, and R. Sellamuthu
Publisher : Applied Mechanics and Materials
Evolving cost-effective routing of vehicles for blood bank logistics
Authors : Dr. Anbuudayasankar S. P., K. Ganesha, T. T. Narendran.
Publisher : International Journal of Logistics Systems and Management
Effects of Solidification Time on Mechanical Properties and Wear Behaviour of Sand Cast Aluminium Alloy
Authors : Dr. Ilangovan S.
Publisher : International Journal of Research in Engineering and Technology
Effects of Aging Time on Mechanical Properties of Sand Cast Al-4.5Cu Alloy
Authors : Dr. Ilangovan S., Srikanthan R., and Veda Vyass G.
Publisher : International Journal of Research in Engineering and Technology
The effect of section size on cooling rate, microstructure and mechanical properties of A356 aluminium alloy in casting
Authors : Dr. Sanjivi Arul, K. T. Akhil, and Sellamuthu, R.
Publisher : Procedia Materials Science
The Effect of Heat Treatment and Aging Process on Microstructure and Mechanical Properties of A356 Aluminium Alloy Sections in Casting
Authors : Dr. Sanjivi Arul, A. M. Xavior, Yarlagadda, P. K. D. V., Akhil, K. T., and R. Sellamuthu
Publisher : Procedia Engineering
Effect of electrode diameter and input current on gas tungsten arc welding heat distribution parameters
Authors : Dr. Sanjivi Arul, R. B Chandra, and Sellamuthu, R
Publisher : Procedia Materials Science
Dynamic control of a pulsatile jet propelled aquatic robot
Authors : Dr. Sanjivi Arul, R. Radhika, Gupta, S. K., and Rammohan, N.
Publisher : Applied Mechanics and Materials
Dry Sliding Wear Behaviour of Sand Cast Cu-11Ni-6Sn Alloy
Authors : Dr. Ilangovan S., Jiten S.
Publisher : International Journal of Research in Engineering and Technology
Development Of Automated Aerial Pesticide Sprayer
Authors : Dr. Sanjivi Arul, P. D. P. R. Ha Vardhan, .Dheepak, S., and .T.Aditya3, P.
Publisher : IJRET: International Journal of Research in Engineering and Technology
Determination of melting efficiency of mild steel in GTA welding process
Authors : Dr. Sanjivi Arul, G. S. Kumar, and R. Sellamuthu
Publisher : Applied Mechanics and Materials
Variants, meta-heuristic solution approaches and applications for image retrieval in business-comprehensive review and framework
Authors : Dr. Anbuudayasankar S. P., S. Umamaheswaran, K. Ganesh, N. Kumar, S., and Sethupathi, P. V. Rajendra
Publisher : International Journal of Business Information Systems
Study on Effects of Magnetization of Fuel on Diesel Engine
Authors : Senthilkumar D., N. Tom Varghese, and Vivek, M
Publisher : International Journal of Applied Engineering Research
A study on effect of sub zero temperature cooling on surface roughness of turned EN8 steel rod
Authors : Dr. Sanjivi Arul, S. Murugappan
Publisher : International Journal of Applied Engineering Research
Study of microstructure, hardness and wear properties of sand cast Cu-4Ni-6Sn Bronze alloy
Authors : Dr. Ilangovan S.
Publisher : Journal of Engineering Science and Technology
Remaining life assessment of boiler components
Authors : Dr. Raghuram P., Hemanath, S.; Hiran, S.H.; Vignesh, M.; Ranjith, S.
Publisher : International Journal of Applied Engineering Research
Optimization of Machining Parameters In Turning Process Using Exergy Analysis
Authors : Dr. Raghuram P., K. Balaji; Karthik S; Hari Haran R; Siva Sankar P; Vimal P
Publisher : International Journal of Applied Engineering Research
Optimization and scheduling of HAZCHEM logistics with time windows : A case study
Authors : Sarath S., Dr. Raghuram P., Venkateswaran, R.
Publisher : International Journal of Applied Engineering Research
Effect of variation in Al/Si content on mechanical properties of Zn-Al-Si alloys
Authors : Dr. Ilangovan S., Dr. Sanjivi Arul, A. Shanmugasundaram, S. R. Kasthuri Raj
Publisher : International Journal of Applied Engineering Research
Effect of shallow cryogenic treatment on mechanical properties of AISI 1018 steel
Authors : Dr. Sanjivi Arul, T. S. V. Dheemanth, Rahul, K., Suman, N., and Devanathan, R.
Publisher : International Journal of Applied Engineering Research
Effect of iron oxide nanoparticle in bio digestion of a portable food-waste digester
Authors : Dr. Sreekanth K. M., Dr. Debjyoti Sahu
Publisher : Journal of Chemical and Pharmaceutical Research
Discontinuity induced bifurcations in Nonlinear Systems.
Authors : Dr. Santhosh B., S Narayanan, and C Padmanabhan
Publisher : IUTAM Symposium on Analytical Methods in Nonlinear Dynamics
Criticality Analysis and Inventory Cost Reduction for High-Value, High Volume Spares
Authors : Dr. Raghuram P., Sonujalam .K
Publisher : International Journal of Applied Engineering Research
Smartphone-based fundus camera device (MII Ret Cam) and technique with ability to image peripheral retina.
Authors : Lakshmikanthan C., A. Sharma, Subramaniam, S. Devi, Dr. K. I. Ramachandran, Krishna, S., and Sundaramoorthy, S. K.
Publisher : Eur J Ophthalmol
Process parameters effect on the strength of Friction Stir Spot Welded AA6061
Authors : Dr. Padmanaban R., Dr. R. Vaira Vignesh, Arivarasu, M,Karthick, K.P, Abirama Sundar, A.
Publisher : ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network
Privilege-based scoring system against cross-site scripting using machine learning
Authors : Dr. Gireeshkumar T., Sunder, N.S.;
Publisher : Advances in Intelligent Systems and Computing
Power generation by high head water in a building using micro hydro turbine-a greener approach.
Authors : Dr. Anbuudayasankar S. P., Dr. Balaji K., B. M. M. S. R. S., V., R. Kishore, and Dr. Anbuudayasankar S. P.
Publisher : Environ Sci Pollut Res Int
Performance comparison for aluminium, copper and steel shots in waste heat recovery and scrap preheating from solidifying molten metal
Authors : Dr. M. Thenarasu, Mathew, M.M.;; Aravind, G.; Selvaraj, J.
Publisher : ARPN Journal of Engineering and Applied Sciences
Novel Lightning Strike Protected Polymeric Composite for Future Generation Aviation
Authors : Dr. Shantanu Bhowmik, S S. Sharma; A.Nivetha, A; Maalavan, K.; Siva Subramanian, S.; Sree Kumar,; P Mohan; S. Ramanathan; R. Rane; S. Mukherjee
Publisher : Journal of Aerospace Engineering
Novel Adhesion Promotion of Aluminium for Aviation Environments
Authors : Dr. Shantanu Bhowmik, H. Prakash, G. Ajeesh, and Thenarasu, M
Publisher : Journal of Surface Engineering and Applied Electrochemistry
Measurement of the variation of mechanical properties with aging temperatures for sand cast Cu-5Ni-5Sn alloy
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : Journal of Engineering Science and Technology
An investigation on the benefits of ICT deployment in Supply Chain Management (SCM)
Authors : Prashant R. Nair, Dr. Anbuudayasankar S. P.
Publisher : Indian Journal of Science and Technology, Indian Society for Education and Environment.
Influence of Specimen Temperature on Wear Characteristics of AA6063 Aluminium Alloy
Authors : Dr. Ilangovan S., A. Shanmugasundaram, Dr. Sanjivi Arul
Publisher : Journal of Surface Science and Technology
Influence of fluctuating wind conditions on vertical axis wind turbine using a three dimensional CFD model
Authors : Dr. Ratna Kishore V., Dr. Laxman Vaitla, Bhargav M.M.S.R.S.
Publisher : Journal of Wind Engineering and Industrial Aerodynamics.
Experimental Investigation on Mechanical, Tribological and Machining Behavior of (Cu-10Zn)100-x – x wt.% Al2O3 Nanocomposite Prepared by Mechanical Alloying and Hot-Pressing
Authors : Dr. Ilangovan S., K. R. Ramkumar, S .Sivasankaran, and Abdulaziz S Alaboodi
Publisher : Journal of Materials and Design
Empirical Correlation of the Primary Stability Variable of Liquid Jet and Liquid Sheet under Acoustic Field
Authors : Dr. Balaji K., Sampathkumar M.C., Hassan M.M.d, Karthik K.M.e, Saidileep K.b
Publisher : Journal of Fluids Engineering, Transactions of the ASME, American Society of Mechanical Engineers (ASME)
Emission Characteristics of Turbocharged Single Cylinder Diesel Engine
Authors : Senthilkumar D., V. R. Varthan
Publisher : Indian Journal of Science and Technology
Effect of heat treatment on the wear behaviour of functionally graded LM13/B4C composite
Authors : Dr. Radhika N., Priyanka Muddamsetty, L.V.;
Publisher : Tribology in Industry, Masinski Fakultet – Kragujevac
Effect OF CO2/N2 dilution on laminar burning velocity of liquid petroleum gas-air mixtures at elevated temperatures
Authors : Dr. Ratna Kishore V., Nair, A.;; Kumar, S.
Publisher : Energy, Elsevier Ltd
Discontinuity induced bifurcations in nonlinear systems
Authors : Dr. Santhosh B., ., S Narayanan, and C Padmanabhan
Publisher : Procedia IUTAM,
Development of lightweight high-performance polymeric composites with functionalized nanotubes
Authors : Dr. Shantanu Bhowmik, Arun A, Vijayan, V.J.; M. Abraham; Ajeesh, G.; Pitchan M. K.
Publisher : Journal of Applied Polymer Science, John Wiley and Sons Inc
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Authors : Dr. Radhika N.
Publisher : Science and Engineering of Composite Materials.
Comparative Study of Conventional and Rapid Prototyping Technique for the Fabrication of Porous Scaffold for Tissue Engineering Applications
Authors : Dr. M. Ramu, Kumaresan T., Gandhinathan R, Ananthasubramanian M, and Banu Pradheepa K
Publisher : Biomedicine
Characterisation of tensile strength and impact toughness of autogeneous PCGTA weldments of aeronautical steel and austenitic stainless steel
Authors : M Arivarasu; Devendranath Ramkumar K; Arivazhagan. N
Publisher : Kovave Materialy – Metallic Materials Article in press
Assessing the responsiveness of supply chain -structural equation modelling based approach
Authors : Dr. Saleeshya P. G., Dr. Raghuram P.
Publisher : International Journal of Logistics Systems and Management, Inderscience Enterprises Ltd.
Synthesis and characterization of bagasse ash nanoparticles by sol-gel technique
Authors : Dr. T. Satish Kumar, Shalini, S., and R. Subramanian
Publisher : National Journal of Technology
A Study on Chip Morphology of Aluminum Alloy 6063 during Turning under Pre Cooled Cryogenic and Dry Environments
Authors : Dr. Sanjivi Arul, Jenso Eapen; and Shanmugam Murugappan
Publisher : Materials Today: Proceedings
A novel Discrete PSO Algorithm for Solving Job Shop Scheduling Problem to Minimize Makespan
Authors : Dr. Ramesh Kumar K., Rajendran, C.
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing
Influence of Vegetable Based Cutting Fluids on Cutting Force and Vibration Signature During Milling of Aluminium Metal Matrix Composites
Authors : Dr. T. Mohanraj, Shankar, S., and Ponappa, K.
Publisher : Jurnal Tribologi
Experimental Investigation and Process Parameter Optimization in Milling of 7075 – T6 Hybrid Aluminium Metal Matrix Composite using esponse Surface methodology
Authors : Dr. T. Mohanraj, Shankar, S.
Publisher : Journal of the Balkan Tribological Association
Effect of Na doping on structure, morphology and properties of hydrothermally grown one dimensional TiO 2 nanorod structures
Authors : Dr. T. Satish Kumar, S. Shalini, Prabavathy, N., Balasundaraprabhu, R., Walke, P., Prasanna, S., and Velayuthapillai, D.
Publisher : Journal of Materials Science: Materials in Electronics
Development of Cu-6Sn-5Ni-xTi and to analyse their mechanical and wear properties in as-cast condition
Authors : Dr. Karthik V. Shankar, Paul, C., & Sellamuthu, R.
Publisher : International Journal of Microstructure and Materials Properties
Determination on the effect of tin content on microstructure, hardness, optimum aging temperature and aging time for spinodal bronze alloys cast in metal mold
Authors : Dr. Karthik V. Shankar, Dr. Sellamuthu R.
Publisher : International Journal of Metalcasting, American Foundry Society,
Burning velocities of DME(dimethyl ether)-air premixed flames at elevated temperatures
Authors : Dr. Kumaresan S., Varghese, R.J.; Kishore, V.R.; Akram, M.; Yoon, Y.; Kumar, S.
Publisher : Energy
Synthesis and Characterization of Zircon/Graphite and Flyash/Graphite Reinforced Aluminium7075 Alloy: A Comparative Study
Authors : Dr. Ilangovan S., N. Balaje Krishna, and Parvathy Unnikrishnan
Publisher : Journal of Materials and Environmental Sciences
Study of Mechanical and Wear Properties of Stir-Cast Al-Si-Cu alloy
Authors : Dr. Ilangovan S., Dileep Divakaran Namboodiri
Publisher : International Conference on Recent Research in Materails Engineering (International Journal of Engineering and Technology),
Strengthening Steel Members with Holes Under Tension Using Unidirectional GFRP Sheets
Authors : Mahadevan Lakshmanan, Dr. Mini K. M., E. Parvathi
Publisher : International Journal of Steel Structures, Korean Society of Steel Construction,
Strength Properties of Concrete Blocks with Sand Manufacture Sludge as Partial Replacement to Fine Aggregate
Authors : Dr. R. Ramkrishnan, Dr. Dhanya Sathyan, Kottukappalli, F.G.; Ramkrishnan R.; Dhanya Sathyan; Mini, K.M.; Basavarajappa S.; Nagaraja S.R.
Publisher : Materials Today: Proceedings
Polyaniline/Fe3O4-RGO Nanocomposites for Microwave Absorption
Authors : Sabarish Narayanan B., Dr. Nikhil K. Kothurkar, J. Mathew, Sathishkumar, M., Kothurkar, N. K., and Senthilkumar, R.
Publisher : IOP Publishing
Numeri cal Study on Thrust Generation in an Airfoil Undergoing Nonsinusoidal Plunging Motion
Authors : Dr. Ratna Kishore V., Dr. Laxman Vaitla, Srikumar G., Srikrishnan V.A., Purushothaman R.K., Thiagarajan V.
Publisher : American Society of Civil Engineers (ASCE)
Influence of Homogenization Temperature on Mechanical Properties from Outer to Inner Zone of Al–Cu–Si Alloy Castings
Authors : Dr. Sanjivi Arul, Dr. Ilangovan S., Naveen, E.
Publisher : Proceedings of the International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018)
A Finite Element Analysis of Dissimilar Materials Diffusion Bonded Joints
Authors : Unnikrishnan D., P. Deepak, V. M. Latheesh, A. Sumesh, and A. Santhakumari
Publisher : ICMMM2017
An experimental investigation of Cu-Ni-Sn alloy on microstructure, hardness and wear parameters optimization using DOE
Authors : Dr. Ilangovan S., J. Sreejith, M. Manideep, and S. Harish
Publisher : Tribology in Industry
Effect of Variation in Zinc Content and Ageing Treatment on Tribological Properties of Cast Aluminium-Zinc Alloys
Authors : Dr. Ilangovan S., Ilyas Hussain
Publisher : International Journal of Pure and Applied Mathematics
Effect of surface modification using gtaw as heat source and cryogenic treatment on the surface hardness and its prediction using artificial neural network
Authors : Dr. Sanjivi Arul, Chaanthini M. K.
Publisher : Lecture Notes in Mechanical Engineering
Analysis of three body abrasive wear behaviour of centrifugally cast aluminium composite reinforced with ni coated sic using taguchi technique
Authors : Dr. Radhika N.
Publisher : Tribology in Industry
Strengthening of Plain Concrete Cylinders with Natural FRP Composite Systems
Authors : Dr. Mini K. M., Mahadevan Lakshmanan, Dr. Jayanarayanan K., A. Padanattil
Publisher : Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer International Publishing
Parametric study and optimization of linear and nonlinear vibration absorbers combined with piezoelectric energy harvester
Authors : Dr. Santhosh B., Raj, P.V.R.
Publisher : International Journal of Mechanical Sciences
Mixing studies in turbulent oxy-methane jets with and without reaction
Authors : Dr. Srikrishnan A. R., Tamal, J., Deependran, B., Ajith Kumar R.
Publisher : Lecture Notes in Mechanical Engineering, Pleiades Publishing
Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–x wt.% TiC composites for aerospace applications
Authors : Ramkumar, K.R.; Sivasankaran, S.; Al-Mufadi, F.A.; Siddharth, S.; Raghu, R.
Publisher : Archives of Civil and Mechanical Engineering
Improving Surface Hardness of EN31 Steel by Surface Hardening and Cryogenic Treatment
Authors : Dr. Sanjivi Arul, Chaanthini, M.K.;
Publisher : Journal of The Institution of Engineers (India): Series D
EXPERIMENTAL STUDY of SURFACE ROUGHNESS and TAPER ANGLE in ABRASIVE WATER JET MACHINING of 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY
Publisher : Surface Review and Letters
Determination of weld process parameters for precisional welding: A DOE & FEA Approach
Authors : Dr. Radhika N., PSS. Srinivasan; K. Suresh Kumar; M. Joseph Davidson
Publisher : National Journal of “Manufacturing Technology Today
Numerical Analysis of Effects of Turbine Blade Tip Shape on Secondary Losses
Authors : Dr. Srikrishnan A. R., Sarath, R. S., Ajith Kumar, R., Prasad, B.V.S.S.S.
Publisher : Fluid Mechanics and Fluid Power – Contemporary Research, Part of the Lecture Notes in Mechanical Engineering book series (LNME), Springer India
Influence of process parameters on wear behaviour of hybrid aluminium composites
Authors : Dr. Radhika N.
Publisher : International Journal of Operations Systems and Human Resource Management