Back close

Digital sensor simulation frame work for hardware-in-the-loop testing

Publication Type : Conference Proceedings

Publisher : 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017

Source : 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017, Institute of Electrical and Electronics Engineers Inc., Volume 2018-January, p.813-817 (2018)

Url : https://www.scopus.com/inward/record.uri?eid=2-s2.0-85049380257&doi=10.1109%2fICICICT1.2017.8342669&partnerID=40&md5=81339c64b7961101a327fa23b885dd30

ISBN : 9781509061068

Keywords : accelorometer, Actuators, Arduino, Control systems, Cost effectiveness, Design for testability, Dynamic analysis, Embedded systems, Hardware, Hardware-in-the-loop simulation, Hardware-in-the-loop testing, Hardwarein-the-loop(HIL) simulation, Intelligent computing, Loop systems, Operational environments, Raspberry Pi, Sensors, Sensors and actuators, Synthetic apertures, Testing

Campus : Coimbatore

School : School of Engineering

Department : Electrical and Electronics

Year : 2018

Abstract : Hardware-in-the-Loop (HIL) simulation is a dynamic testing technique that simulates the Input/output (I/O) behavior of a physical system that interfaces to a control system. HIL testing allows the designer to simulate the real-time behavior and characteristics of the physical system, so as to test the Device Under Test (DUT) which operates on the physical system, without the need for the actual hardware or operational environment. In this paper, the physical system considered is digital sensors and the control system is a QT based application which utilizes the output from these sensors. Thus, models of the sensors of interest will be created with the help of data sheets of the same and will be implemented in the modeling hardware. The proposed HIL simulator could be used for simulating sensors with I2C outputs. Accelerometer sensors-BMA280 and BMC150 is implemented on the hardware of choice and code libraries for the same are created. This provides a cost effective way of testing large systems including various sensors and actuators. © 2017 IEEE.

Cite this Research Publication : B. A. Krishnan and Dr. Anju Pillai S., “Digital Sensor Simulation Frame Work for Hardware-in-the-loop Testing”, 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017, vol. 2018-January. Institute of Electrical and Electronics Engineers Inc., pp. 813-817, 2018.

Admissions Apply Now